浅谈人造薄木生产中单板的漂白

详细阐述了木材颜色的成因及漂白机理，重点介绍了人造薄木生产过程中单板漂白工艺。研究表明，经漂白处理的单板，颜色明显变浅，色调也比较均匀，而且还消除了板面污染，对单板的染色十分有利。     

麻类纤维在非织造领域的应用

本文阐述了麻类纤维在我国非织造行业新用途的开发和拓展，对麻类纤维在非织造领域的利用符合国家农业可持续性发展的方向。     

23种广东常见阔叶树材的耐磨性质

本文报导23种广东常见阔叶树材的耐磨性试验结果,并对耐磨性与木材密度、硬度的关系及木材耐磨性各向异性问题作了讨论。     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

超临界CO_2流体处理工艺对木材渗透性的影响

以苯—乙醇为夹带剂,研究超临界CO2流体不同处理压力、温度、时间对福建产杉木、马尾松、檫木木材渗透性的影响。结果表明,在35 MPa内,处理压力的增大有利于3种木材渗透性的提高;杉木在处理温度为40℃时,渗透性的变化率达到最大,为493%,马尾松和檫木在处理温度为45℃时,渗透性的变化率达到最大,分别为479%和349%;较佳的处理时间为30 min。     

火炬松短周期工业材不同高度上干缩性能的研究

对湖南同一立地指数（１８）下，５株１７．５年生的火炬松（ＰｉｎａｓｔａｅｄａＬ．）短周期工业材１．３，３．６，５．６，７．６，９．６ｍ５个高度的木材干缩系数、基本密度、生长轮宽度、晚材率和微纤丝角度，按生长轮取样，进行了测量和统计分析．结果表明，弦向、径向、体积干缩系数和干缩比，在树于５个高度之间的差异，均达到了显著水平；各高度干缩系数与生长轮的年龄（离髓心的距离）以及与上述各主要构造因子之间呈显著的线性相关，且相关度度随树干高度的增加而减弱．     

日粮纤维及其对幼龄单胃动物消化功能的影响

日粮纤维能提供大量的能量,而且有利于维持动物机体的正常消化功能。本文综述了日粮纤维的代谢及对幼龄单胃动物消化功能的影响。     

Fungi associated with esca disease in grapevine

Cross sections of woody stems of 309 diseased grapevines collected in France showed two kinds of necrosis typical of esca: a) A central light-colored necrosis of soft consistency, consisting of three zones, preceded by a centrally discolored wood, and b) a sectorial light-colored necrosis composed of two zones preceded by a sectorial brown necrosis. Isolations showed that different microflora was associated with each necrosis. Phaeoacremonium aleophilum and Phaeoacremonium chlamydosporum occurred in the discolored wood and the zones bordering the central decayed wood. Eutypa lata was the main fungus isolated from sectorial brown necrosis and the zones adjoining the decay wood. Phellinus punctatus was isolated from the sectorial and central decayed wood. Stereum hirsutum was present in decayed wood of 15 grapevines with esca symptoms not inhabited by P. punctatus. Wood decay tests and pathogenicity tests showed that S. hirsutum and P. punctatus were responsible for the decayed wood. Phaeoacremonium chlamydosporum and S. hirsutum produced a centrally discolored wood similar to that found in esca-affected vines. Phaeoacremonium aleophilum caused a sectorial brown necrosis of soft texture. From these studies, it was found that esca is a complex disease involving several microorganisms whose role in the process leading to wood degradation is discussed.     

木质包装中黄斑星天牛微波处理初探

为了探索微波处理作为木质包装替代处理方法的可能性,对不同规格和含水量的杨树木块进行微波处理试验,结果表明:频率为2450MHz的微波能够穿透厚度为10cm的杨树木材;当微波功率为900W时,规格为10cm×10cm×10cm和10cm×10cm×2.5cm的新木块中黄斑星天牛(Anoplophora nobolis)幼虫完全死亡所需时间分别为5min和2min;而干木块中则仅需3min和30s.对微波处理引起木材温度变化和水分损失以及天牛幼虫的水分损失进行了初步研究.     

木束形态对沙柳材重组木性能的影响

以沙柳材为原料,在沙柳材重组木制造关键参数正交试验的基础上,探讨了沙柳(Salix mongolica)材重组木木束形态对产品物理力学性能的影响,以及实验室条件下制造沙柳材重组木的较佳木束形态.