Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

4种植物油热氧化同步荧光光谱分析

以亚麻籽油、大豆油、菜籽油与葵花籽油为原料,在不同温度条件下氧化并测定其不同时间的同步荧光光谱,分析同步荧光光谱及荧光物质变化情况。结果表明,4种植物油不同温度下的同步荧光光谱峰变化主要集中在300~415 nm内,且随着加热时间的延长存在波动现象;在50℃和150℃加热氧化条件下,300,330,375,415 nm这4个峰都存在明显的波动现象;二维相关分析表明,这4个峰的荧光强度变化速率不同,不同油变化差异较大;同种油在不同温度下,4个峰的波动情况、相互关系、变化速率均有明显差异。这些峰的变化与油脂氧化过程中荧光物质和油脂氧化程度的变化有关,可以利用同步荧光光谱的变化特性作为监控油脂氧化的依据。     

水溶液中MTsPc分子聚集态的吸收光谱研究

合成并提纯了六种第四周期过渡金属的MTsPc(M=Mn,Fe,Co,Ni,Cu,Zn)分子,并利用吸收光谱对不同浓度和pH下水溶液中MTsPc分子的聚集态进行了系统研究。实验结果表明MTsPc在水溶液中形成分子二聚体的能力顺序为NiTsPc>CuTsPc>ZnTsPc>CoTsPc。根据吸收光谱结果,可将六种MTsPc分成三类。第一类为ZnTsPc、CuTsPc和NiTsPc,这三种分子在溶液中只能形成正常面对面二聚体,而不能与氧加合。第二类为CoTsPc,其在溶液中既可以形成分子二聚体也可以与氧加合,而生成分子氧桥二聚体。第三类为MnTsPc和FeTsPc,这两种分子在溶液中多数以含氧桥二聚体形式存在,且多为原子氧桥二聚体。溶液pH值的变化可以改变溶液中MTsPc分子的存在状态。对于第一类MTsPc,酸碱性条件均促使其分子二聚体的形成,而对于第二、三类的MTsPc,酸性条件使得其形成分子氧桥二聚体,碱性中则形成原子氧桥二聚体。     

微波电路电测及其计算方法

从实际工程的角度出发，对电路电测方法进行了论述。在微通信工程中，需要获得障碍物的位置和高度，最合理的天线高度组合和障碍物绕射损耗等参数，为此论述了微波电路电测方法及技术要求。在大庆－秦皇岛输油管道通信工程中采用了Ａ，Ｂ测试法进行测试，得到高度－损耗曲线。这种曲线给出相对自由空间接收电平与收，发天线高度之间的关系。在测试所得的高度－损耗曲线与断面图相结合的基础上，由绕射损耗计算公式推出了几种常见障碍     

How to perform transvenous electrical cardioversion in horses with atrial fibrillation

Electrical cardioversion of atrial fibrillation is a well-established technique for restoration of sinus rhythm in humans. While transthoracic cardioversion is more commonly used, transvenous electrical cardioversion (TVEC) has been reported as having higher efficacy at substantially lower energy levels. In horses, treatment of atrial fibrillation has essentially been limited to the administration of quinidine salts either orally or intravenously. TVEC provides an alternative to quinidine salts, especially for those animals in which quinidine is neither effective nor tolerated. The present report details this technique in horses, discusses possible complications of the procedure, and provides guidance for successful outcome. Still and video images are used to illustrate details with regard to TVEC techniques in horses. Please view supplemental material for the videos.     

Prediction of chemical composition and peroxide value in unground pet foods by near‐infrared spectroscopy

The massive development of the pet food industry in recent years has lead to the formulation of hundreds of canine and feline complete extruded foods with the objective of meeting both the needs of the animals and numerous demands from pet owners. In the meantime, highly variable raw material compositions and the industry's new production techniques oblige manufacturers to monitor all phases of the extrusion process closely in order to ensure the targeted composition and quality of the products. This study aimed at evaluating the potential of infrared technology (visible and near‐infrared spectrophotometer; 570–1842 nm) in predicting the chemical composition and peroxide value (PV) of unground commercial extruded dog foods. Six hundred and forty‐nine commercial extruded dog foods were collected. For each product, an unground aliquot was analysed by infrared instrument while a second aliquot was sent to a laboratory for proximate analysis and PV quantification. The wide range of extruded dog food typologies included in the study was responsible for the wide variability observed within each nutritional trait, especially crude fibre and ash. The mean value of the 208 pet foods sampled for PV quantification was 17.49 mEq O₂/kg fat (min 2.2 and max 94.10 mEq O₂/kg fat). The coefficients of determination in cross‐validation of NIRS prediction models were 0.77, 0.97, 0.83, 0.86, 0.78 and 0.94 for moisture, crude protein, crude fat, crude fibre, ash and nitrogen‐free extract (NFE) respectively. PV prediction was less precise, as demonstrated by the coefficient of determination in cross‐validation (0.66). The results demonstrated the potential of NIRS in predicting chemical composition in unground samples, with lower accuracy for moisture and ash, while PV prediction models suggest use for screening purposes only.     

Repeat patient testing shows promise as a quality control method for veterinary hematology testing

Background

Repeat patient testing‐based quality control (RPT‐QC) is a potential method for veterinary laboratories (eg, that have a limited budget for quality commercial control material [QCM] or that wish to use material with a species‐specific matrix).

Objectives

To determine whether total error (TE_a), probability of error detection (Ped), and probability of false rejection (Pfr) similar to that achievable with QC materials can be controlled using RPT‐QC

Methods

Control limits (WBC, RBC, HGB, HCT, MCV, and PLT) for the Advia 120 (n = 23) and scil Vet ABC (n = 22) were calculated using data from normal canine specimens from a routine caseload. Specimens were measured at accession and again after 24 hours. Control limits were validated using 23 additional canine specimens tested similarly. Achievable TEa, Ped, and Pfr were investigated using the Westgard EZRules3 and compared to those achievable with commercial QCM.

Results

Theoretical performance of RPT‐QC and commercial QCM‐QC are similar for 1‐3s with both n = 1 and 1‐3s with n = 2 for all measurands and both instruments. Achievable TE_a values for RPT‐QC were close to ASVCP recommendations for most measurands; exceptions were PLT (both instruments) and WBC (scil Vet ABC).

Conclusions

Repeat patient testing‐based quality control advantages include a species‐specific matrix, low‐cost, and absence of QC material deterioration over time (since a fresh specimen is used each day). A potential disadvantage is daily access to normal canine specimens. A challenge is determining control limits, which has a subjective element. Further study is needed to confirm actual RPT‐QC performance and to determine if RPT‐QC with abnormal patient specimens is feasible.     

Pedotransfer functions to assess adsorbed phosphate using iron oxide content and magnetic susceptibility in an Oxisol

Adsorbed phosphate in soils can be chemically extracted; however, this process is both time‐consuming and not cost‐effective if large numbers of samples have to be analysed. Indirect assessment of adsorbed phosphate by pedotransfer functions (PTFs) can help optimize fertilizer strategies. This study aimed to evaluate the spatial variability of adsorbed phosphate (P_ads), iron oxides and magnetic susceptibility (MS) in oxisols and to calibrate PTFs to predict P_ads. A total of 308 soil samples were collected from Hapludox and Eutrudox soils formed from sandstone in Brazil. The contents of clay (196–607 g/kg), iron oxides (40–165 g/kg), MS (1.2–29 × 10^?6 m³/kg) and P_ads (327–842 mg/kg) were in the range of typical values for these highly weathered soils. This study showed that the attributes studied were spatially dependent. Geomorphic surfaces enabled understanding of spatial variability and helped to develop a more efficient sampling scheme to calibrate PTFs. Moreover, the adsorbed phosphate in these oxisols could be predicted by a PTF using iron oxides and MS as predictors. The MS attribute enabled the most accurate prediction (concordance coefficient = 0.95, root‐mean‐square error = 46 mg/kg and relative improvement in root‐mean‐square error = ?4.12) of spatial variability through PTF compared to other predictors.