Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

东北地区外来针叶树种引种现状及发展策略

介绍了东北林区主要针叶树种引种现状及取得的成就，分析了东北三省针叶树种引种工作中存在的问题，提出了建立较为科学的引种网络体系和发展策略，并提供了可能在干旱、半干旱区引种成功的针叶树种名     

西北工业大学金叶信息技术学院中心绿地景观设计

探讨了西北工业大学金叶信息技术学院中心绿地的景观设计方案,本着生态可持续发展、以人为本和浓郁文化内涵的原则,创造一个以自然景观和人文景观相结合的优美环境,为师生提供具有园林艺术氛围的学习、交流、休闲、娱乐和生活的场所.     

Radiation Balance Components of Maize Hybrids Grown at Various Plant Densities

Components of the energy and heat balances were examined in two maize hybrids grown at three different plant densities (40, 70 and 100 thousand plants per hectare). One of the hybrids was drought tolerant, while the other was bred for cultivation under irrigated conditions. An increase in plant density influenced not only the size of the leaf area, but also the distribution of the leaves at various plant heights. The extinction coefficient, which provides a quantification of radiation penetration, was higher in the irrigated treatments. By contrast to the other two treatments, the plant canopy in the thinly sown stands remained open throughout the vegetation period, and thus behaved quite differently to the closed stands, making it impossible to compare them. Smaller albedo values were recorded for the hybrid bred for irrigation and in thinly sown stands. The low plant density allowed more energy to reach the soil, from which it was reflected, making a considerable contribution to the final temperature in the stand. The latent heat, in keeping with the quantity of water transpired, was the greatest in the densely sown stands. There was little difference between the latent heat values of the normal and dense stands in either hybrid, indicating that they both had a similar sensitivity to increased stand density. If sufficient water is available it would appear that the stand density could be increased even for the drought-tolerant hybrid.     

论建筑创作整合思维方法及其应用

本文针对建筑创作思维方法进行研究 ,提出了研究整合思维方法的目的、意义以及功能 ,论述了以“真、善、美”作为建筑创作的追求目标和应用整合思维方法进行建筑创作应遵循的基本原则     

互联网环境下的暖通CAD组件模块的开发方法研究

针对单机环境下暖通CAD软件重复开发量大、开发周期长等现状，提出了基于互联网环境的三层体系结构及其开发的通用环境，即整个暖通CAD系统被分为不同逻辑块，开发和管理的工作向服务器方转移，从而使分布处理数据成为可能，基于组件的软件开发是互联网环境中应用软件的主要开发方式，以构架为组装蓝图，以可重用组件为组装预制块，支持组装式软件重用，从而克服人力和物力的浪费，进而为了重用暖通CAD已开发出的功能模块，给出组件逆向工程的开发方法、组装流程和组件管理过程。     

林木抗旱性生理指标及其在干旱区造林中应用研究

<正> 中国干旱半干旱区面积占全国面积的52.5%,半壁河山是以水分胁迫为主导限制因子的特殊生态区。为了提高这一地区的造林质量,选择旱生和抗旱性强的树种造林是主要造林技术之一。对于如何评价和比较林木的抗旱性,传统方法多采用对林木生态环境因子及对林木生     

菇木年龄对香菇产量和营养成份含量的影响

用南酸枣、秃瓣杜英、马褂木、麻栎、锥栗、枫香、银荆等7个优良菇木树种的不同年龄树木木屑作为栽培基质，选用126香菇品种做供试菌株，通过香菇总产量、冬菇产量、香菇营养物质含量的对比试验，结果表明，这7种菇木林树种7年树龄木屑栽菇香菇的性能优于或不低于15年成年树龄，用南酸枣、秃瓣杜英、马褂木、麻栎、锥栗、枫香、银荆作为经营短轮伐期菇木林树种是可行的。     

园林布局中必然性和偶然性要素的辩识与运用

阐释了园林构成要素中的必然性要素和偶然性要素及其相互关系与运用意义；以昆明世博园中“齐鲁园”为例，辩识了“齐鲁园”中必然性与偶然性园林要素，分析了诸要素在特定园林环境布局中的运用。     

Systemic spread of Plum pox virus (PPV) in Mariana plum GF 8-1 in relation to shoot growth

Infection of Prunus spp. by Plum pox virus (PPV) is characterized by an uneven distribution of the virus within the tree and branches. In order to gain a better understanding of this distribution, a method for modelling tree growth was used. PPV spread was followed within susceptible Mariana plum clone GF 8-1 shoots for 4 months after inoculation. Shoot growth was unaffected by the presence of the virus. Symptoms appeared on leaves produced in the most actively growing parts of the shoots, i.e. at the beginning of the season. PPV was detected in leaves other than those showing symptoms. The proportion of leaves with detectable virus decreased from the zone showing symptoms, with 100% ELISA-positive responses, to the shoot tip with no detectable virus in leaves produced between 111 and 127 days after inoculation. Furthermore, a higher proportion of positive ELISA results was obtained below the zone showing symptoms (77%) compared with 50% above. PPV was detected in 95% of the most vigorous shoots 71 days after inoculation compared with 37% of slower-growing, later-produced shoots.