基于Netty的农业物联网服务器系统设计

为了方便对温室环境的监控和控制,使用Netty网络框架设计了一个农业物联网服务器系统,能够简化物联网服务器端的开发,实现下位机与上位机的实时通信。本文阐述了该系统的工作原理和总体设计,以期为实现大棚农作物生长的智能化和信息化管理。     

Some Comments on Gerechte Designs

In a companion paper we derived the correct analysis for gerechte designs with uncorrected errors. Here we show that this correct analysis cannot be justified by the usual randomization argument. However, when the regions are rectangular there is a randomization procedure which validates an analysis with three separate error terms. We also outline other developments in design and analysis that may be more satisfactory.     

大型液化气低温储罐结构及其保冷设计

根据储存液化气大容量储罐的超低温特点，对液化石油气和液化天然气低温储存储罐的隔冷保温材料及其保温结构设计进行了研究，并对几种大型圆筒型立式储罐的结构设计及其技术经济特性进行了讨论和比较。     

罐顶对罐壁应力的影响

在大型油罐设计中采用线性理论的方法,分析论述了罐顶对罐壁是否产生影响这一问题。通过对拱顶油罐、浮顶油罐的罐壁边界条件、罐顶边界条件的分析计算,求出各层壁板挠度方程中的待定系数,便可得出其应力。从线性方程中,可看出影响罐壁应力的主要因素是挠度方程中的待定系数。待定系数除受储罐尺寸、液位高度的影响外,还受罐顶重量、罐顶剪力和弯矩的影响。以10万m~3浮顶油罐和拱顶油罐为例,进一步证明,液位是罐壁应力的控制因素,而罐顶重量、罐顶剪力和弯矩对罐壁应力的影响可以忽略不计。     

TheEstimationofStemTaperCurvefromtheRadialInformationatThreeLocationsontheStem

该文探讨了不用编制削度表直接建立高精度立木干曲线的方法．当采用干曲线是３次多项式时，通常根据１０分法测定树干各部位直径，用最小二乘法求出该方程式的参数．从数学角度，只要知道树干任意３个部位的直径，就可以用最小二乘法或联立方程式求解干曲线参数．本文以樟子松为例，探讨用树干哪３个部位直径拟合的干曲线最接近实际干曲线，为建立立木干曲线提供有效方法．利用９个部位半径（方法Ⅰ）和利用其中３个部位半径（方法Ⅱ，２８种组合）分别拟合干曲线，结果表明方法Ⅱ的６种半径组合的精度良好，其中的３种组合，（ｒ１．３，ｒ０．３，ｒ０．７），（ｒ１．３，ｒ０．４，ｒ０．７）和（ｒ１．３，ｒ０．４，ｒ０．８）是拟合现实干曲线的有效方法．     

谏壁发电厂泵站改造实践

为解决渣浆泵在运行时轴封水供应困难的问题，计算了谏壁发电厂松林山泵站的装置特必,天详细分析论证的基础上，确定了泵站的改造方案，进行了叶轮的优化设计。     

Effect of mate selection on fuzzy selective mating criteria in closed dairy multiple ovulation and embryo transfer nucleus programs

In order to control rates of response and inbreeding, mate selection using fuzzy selective mating criteria (FMC) was investigated in adult multiple ovulation and embryo transfer nucleus schemes for dairy cattle. Stochastic simulation was used to model the closed nucleus scheme. This mate selection was examined in four alternative mating and male selection schemes: (i) a hierarchical scheme; (ii) a hierarchical sibship scheme (two males per sibship); (iii) a factorial scheme (two sires per dam); and (iv) a factorial sibship scheme (two males per sibship and two sires per dam). Genetic response and inbreeding rate tended to be reduced by increasing the trade-off parameter of FMC between the expected breeding value and inbreeding of progeny. Inbreeding rates in all schemes were reduced by reducing the variance of family size through selection and the average coancestry of mating pairs through mate allocation.     

基于工作流的ERP系统重构的研究

分析了企业现有ERP系统运营存在的缺陷，提出了适合本企业的基于工作流的ERP系统重构的开发方案。     

论个性化的大学英语课程设置

讨论了目前大学英语课程设置单一的现状，并分析其形成原因。文章以ESP研究关于需求分析的理论为依据，提出大学应根据学生的实际需要、新时期国家和社会对人才培养需要，区别不同层次、不同程度、不同专业学生的需求，而专门设置一系列大学英语课程。说明了设置个性化的大学英语课程的理由和好处。     

Finding best exotic breed proportion in crossbred lactating sheep kept under farmers’ conditions in Ethiopia determined by use of nested Legendre polynomials with limited data

ABSTRACT

The present study was conducted to estimate milk production performance and fit lactation curves for groups of ewes of Local and of Awassi crosses, with a variable blood level, reared under farmer’s environment. The Weigh-Suckle-Weigh method plus hand milking was used to estimate milk yield for ewes. A total of 466 observations from 115 ewes were used. Estimated least-squares adjusted means for the milk production over 120 days were 0.56?kg day^?1 (Local), 0.67 (<30% Awassi), 0.86 (30–50% Awassi), and 0.96 (>50% Awassi). Groups with 30–50% Awassi and >50% Awassi ewes produced significantly (p?<?0.05) more milk than Local ewes. Significant differences were observed between <30% Awassi and >50% Awassi crossbred groups. The best crosses (>50% Awassi) produced over 70% more milk than the local ewes which demonstrates the potential that exists in increasing milk production through the initiated crossbreeding programme with sheep in Ethiopia.