Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

菜用加工兼用栗永荆3号选育

一般认为我国南方栗仅宜于菜用，加工极易开瓣和糊化，经过几年的筛选和加工试剂，永荆3号品种可生产B－E级标准的糖水栗子罐头。     

甘蓝型双低隐性核不育杂交种沪油杂1号的选育

沪油杂1号(原编号SH-19)是利用隐性上位互作核雄性不育系20118A育成的甘蓝型双低杂交油菜品种.20118A的育性由2对隐性重叠基因和1对隐性上位基因控制,基因型为aabbRfRf,临保系的基因型为aabbrfrf,恢复系的基因型为AA__或__BB__.沪油杂1号种子含油量42.43%,芥酸含量0.62%,硫甙含量24.23μmol/g.在上海市油菜区域试验中平均产量2 243.3kg/hm2,比双高对照汇油50增产11.9%,比双低对照沪油15增产3.8%;在上海市油菜生产试验中平均产量2 244.0kg/hm2,分别比对照汇油50增产33.6%,比对照沪油15增产15.9%.     

贵州农民财产性收入研究

阐述了财产性收入对提高贵州农民收入的重要性,深入分析了贵州农民财产性收入存在的问题和现状,并试图探索提高贵州农民的财产性收入的途径。     

东北地区外来针叶树种引种现状及发展策略

介绍了东北林区主要针叶树种引种现状及取得的成就，分析了东北三省针叶树种引种工作中存在的问题，提出了建立较为科学的引种网络体系和发展策略，并提供了可能在干旱、半干旱区引种成功的针叶树种名     

贵州自然分布山茶属植物的资源现状

介绍了贵州省原生山茶属植物的自然分布及资源现状，共46种4变种。     

纤维亚麻新品种黑亚15号选育报告

黑亚15号是2004年2月通过黑龙江省农作物品种审定委员会审定通过同意注册的纤维亚麻新品种。原茎、长麻、全麻、种子产量分别为5641．7、897．2、1282．3、619．okg／hm2，分别比对照增产9．3％、20．2％、12．2％、11．9％。长麻率20．O％，比对照高2．8个百分点。纤维强度261．ON。属高纤、优质纤维亚麻新品种。     

大白菜新品种中熟6号的选育

中熟 6号是由大白菜雄性不育系 98- 2 - 1和从丰抗 70中多代自交分离而选育出的自交系F - 3-2 - 3配制而成的优良一代杂种。抗霜霉病、病毒病与软腐病 ,生长期 6 0～ 6 5d(天 ) ,叶球叠抱、圆头、卵圆形。南方栽培平均单球质量 2 .0kg ,每 6 6 7m2 产量 4 0 0 0～ 5 0 0 0kg。     

罐藏番茄新品种红杂18的选育

红杂１８是以红２１３为母本，黄苗试材９３７５为父本，配制成适宜罐藏加工和长途运销的番茄一代杂种。具有高抗ＴＭＶ、中抗ＣＭＶ、果实硬度高、抗裂、耐压、耐贮运、果实加工性状优良等特点。已在新疆、甘肃、宁夏、广西、云南等省区的加工番茄生产基地和远运外销生产基地推广６４９．８ｈｍ２。     

脱毒桐籽饼(粕)蛋白质及能量营养价值评价

选用8头30kg的阉公猪和6只1.7kg的伊莎褐公鸡分别对3种脱毒桐籽饼(粕)Ⅰ、Ⅱ和Ⅲ的蛋白质、氨基酸消化率、代谢率进行了测定。结果表明 :3种脱毒桐饼(粕)Ⅰ、Ⅱ和Ⅲ的蛋白质含量分别为31.17 %、35.12 %和23.98 % ;总氨基酸含量为226.93mg/g、278.38mg/g和178.71mg/g,其中赖氨酸含量4.14mg/g、5.01mg/g和3.47mg/g ,蛋氨酸含量为1.24mg/g、1.33mg/g和0.92mg/g ;能量(GE)为17.72kJ/g、16.42kJ/g 和18.02kJ/g。脱毒桐粕Ⅰ的蛋白质消化率为75.15 % ,消化能为12.85MJ/kg;脱毒桐饼(粕)Ⅰ、Ⅱ的表观代谢能分别为4.88MJ/kg 和6.29MJ/kg,真代谢能为5.53MJ/kg 与6.94MJ/kg。3种脱毒桐饼(粕)的氨基酸之间存在不平衡状况 ,从限制性氨基酸的角度来看 ,脱毒桐饼(粕)的第一限制性氨基酸是蛋氨酸、第二限制性氨基酸为赖氨酸。