Impact of climate change on maize yield in China from 1979 to 2016

Climate change severely impacts agricultural production, which jeopardizes food security. China is the second largest maize producer in the world and also the largest consumer of maize. Analyzing the impact of climate change on maize yields can provide effective guidance to national and international economics and politics. Panel models are unable to determine the group-wise heteroscedasticity, cross-sectional correlation and autocorrelation of datasets, therefore we adopted the feasible generalized least square(FGLS) model to evaluate the impact of climate change on maize yields in China from 1979–2016 and got the following results:(1) During the 1979–2016 period, increases in temperature negatively impacted the maize yield of China. For every 1°C increase in temperature, the maize yield was reduced by 5.19 kg 667 m–2(1.7%). Precipitation increased only marginally during this time, and therefore its impact on the maize yield was negligible. For every 1 mm increase in precipitation, the maize yield increased by an insignificant amount of 0.043 kg 667 m–2(0.014%).(2) The impacts of climate change on maize yield differ spatially, with more significant impacts experienced in southern China. In this region, a 1°C increase in temperature resulted in a 7.49 kg 667 m–2 decrease in the maize yield, while the impact of temperature on the maize yield in northern China was insignificant. For every 1 mm increase in precipitation, the maize yield increased by 0.013 kg 667 m–2 in southern China and 0.066 kg 667 m–2 in northern China.(3) The resilience of the maize crop to climate change is strong. The marginal effect of temperature in both southern and northern China during the 1990–2016 period was smaller than that for the 1979–2016 period.     

‘哈伯’南天竹组织培养和快速繁殖

为建立‘哈伯’南天竹组织培养和种苗繁育技术体系,以半木质化带芽茎段为外植体材料开展植株再生研究。通过观察对比试验法、L₉(3⁴)正交试验设计完全随机法、极差分析、显著性检验、LSD多重比较,探讨了‘哈伯’南天竹组培的最适培养基配方。试验结果表明：最佳诱导培养基为MS + 6-BA 2.0 mg/L + IBA 0.1 mg/L +蔗糖30 g/L,诱导萌动率71.77%,成活率85.51%;最佳增殖培养基为WPM +6-BA 1.5 mg/L + IBA 0.01 mg/L + 蔗糖30 g/L,增殖系数6.3;最佳生根培养基为1/2 MS+ IBA 0.5 mg/L + NAA 1.0 mg/L + 蔗糖20 g/L + AC 0.2 g/L,生根率97.63%;试管苗移入泥炭土:珍珠岩=3:2(V/V)混合基质中,移栽成活率96.67%。该试验建立了高效稳定的组培快繁技术体系,得到的组培苗后代能够稳定的保持母本优良性状,为工厂化育苗提供了技术支撑。     

河南油田注聚井聚合物堵塞机理及防治技术

为解决河南油田聚合物驱油注聚井堵塞导致采收率严重下降的问题,采用物理模型试验及扫描电镜(SEM)的方法对堵塞位置、堵塞因素进行研究.聚合物注入性试验结果表明,注入阻力越大,注入压力就越高,确定堵塞位置为近井地带,结果与实际矿场结果相符;扫描电镜结果表明,高渗岩心以吸附堵塞为主,低渗岩心以机械捕集为主;静态吸附试验显示防吸附剂质量分数、聚合物相对分子质量、矿化度、温度均对聚合物吸附有不同程度影响,为此研制出一种使砂岩表面润湿反转以减少吸附的防吸附剂(代号5807),并对注入参数进行优化:防吸附剂最优注入质量分数为0.5％;该防吸附剂耐盐性较好,不同矿化度(1500～10000mg/L)对该防吸附剂体系的防吸附率影响不大;防吸附剂注入体积数越大,聚合物防吸附率越高,最佳注入体积为0.6PV;防吸附剂处理地层的时间越长,聚合物防吸附率越高,处理时间在12h以上防吸附率大于70％;防吸附剂的最佳注入方式为:顶替液+0.6 PV防吸附剂段塞+1PV清洗剂.该研究对油田后续现场施工及动态调整具有重要指导意义,同时也可为河南油田提高聚合物驱技术应用效果提供理论支持.     

青海省祁连圆柏天然林单木生物量模型构建

利用祁连圆柏整株生物量与生长指标数据，为估算祁连圆柏林的生物量估算提供参考。通过野外调查，共获取了63株祁连圆柏天然林样木生物量与生长指标实测数据。用其中50株样木数据进行回归模拟，用其余的13株样木数据对模型可靠性进行检验，构建器官生物量与生长指标间的回归模型。结果表明，祁连圆柏单木水平下，树干生物量模型的R²_adj为0.96，均方根、模型有效性和残差系数分别为0.50、0.85和0.05；枝条生物量模型的R²_adj为0.897，均方根、模型有效性和残差系数分别为0.69、0.80和-0.66；叶生物量模型的R²_adj为0.61，均方根、模型有效性和残差系数分别为0.54、0.86和0.15；根生物量模型的R²_adj为0.93，均方根、模型有效性和残差系数分别为0.12、0.997 和-0.01。在调查数据范围内构建的模型较好地反映了祁连圆柏生物量与生长指标间的关系，形式简单、使用方便；与实测值相比，树干与叶生物量模拟值偏小，枝和根偏大。     

不同杀青方式龙井茶自动化连续生产线加工工艺探讨

文章剖析了不同杀青方式龙井茶自动化连续生产线的设备配置和工艺流程,对生产线的龙井茶品质进行感官评价,为龙井茶生产线推广应用提供借鉴。     

废旧木质柜类家具回收复用的设计及工艺方法

为解决废旧木柜类家具回收、转化再利用的问题，将现行的方法归纳为修饰法、增减法、重组法，分析了本 体翻新设计、本体拆解设计、部件组合设计、零部件设计等回收复用工艺的特点及应用案例，为实现废旧木家具的 经济价值转化和提升、有效利用木材资源提供参考。     

不同光质下外源锌对水培生菜生长和品质的影响

以'意大利耐抽薹'生菜(Lactuca sativa L.)为试材,采用水培法,设置不同光质(红蓝光比例为4∶1、1∶2和全红光、全蓝光)和外源锌浓度(0、0.5、1.0 mg·L-1 ZnSO4·7H2O),研究不同光质下外源锌对水培生菜生长和品质特性的调控效应,以期为植物工厂在不同光质下施加外源锌提高蔬菜产量和品质提供参考依据.结果 表明:高比例红光会促进生菜生物量、可溶性糖和还原糖的积累,并降低硝酸盐的含量,其中以红蓝光比例为4∶1的光质处理效果最好;高比例蓝光会促进光合色素和可溶性蛋白质含量的增加,其中以全蓝光处理效果最好,但全蓝光处理会对植株的生长产生抑制作用.从光质与Zn的互作效果看,光质对生菜生长和品质的影响起主导作用,外源Zn起调节作用.综合考虑,红蓝光比例为4∶1光质下根施0.5 mg·L-1 ZnSO4·7H2O处理对生菜的生长发育、产量提高以及品质改善的促进作用最佳.     

利用GGE双标图分析花生品质性状的基因型-环境互作

花生品质性状的稳定性和基因型-环境互作研究，可为花生品质育种及不同生态区域花生品种的选择提供参考依据。本研究利用GGE-biplot工具，对我国黄淮海花生主产区16个花生品种两年间的品质性状进行了综合分析，包括含油量、油酸、亚油酸、棕榈酸和蛋白质含量等。结果显示，5个品质性状均有较高的GGE总变异值（主成分因素PC1和PC2变异的总和），变幅在61.5%-79.9%之间，以含油量的GGE变异值最低，为61.5%，油酸含量的GGE变异值最高，为79.9%。16个花生品种2年间部分品质性状表现较为一致，其中濮花9519的含油量表型值波动最小，山花9号的亚油酸含量表型值波动最小，开农49是油酸含量表型值最为稳定的品种，天府23号是棕榈酸含量和蛋白质含量表型值最为稳定的品种。初步明确了徐州和濮阳分别适合高油花生和高油酸花生种植，确定了不同生态类型试点下较适合种植的品种，为花生品种推广应用提供了参考。     

Screening and Verification of Low Nitrogen Tolerant and Nitrogen Sensitive Cotton Germplasm

[Objective] The aim of this study is to evaluate nitrogen efficient cotton germplasms and improve nitrogen use efficiency. [Method] Eighty cotton germplasms were selected and evaluated in the hydroponic experiment under low (0.25 mmol·L^－1) and high (5 mmol·L^－1) nitrogen concentration. Different traits for screening were identified and nitrogen use efficiency types were classified. Field experiments were also performed for comparison and confirmation of the identified germplasms. [Result] The results showed that there were significant differences in the total plant dry matter, shoot nitrogen accumulation and nitrogen absorption efficiency in cotton germplasms at the two nitrogen levels. Based on coefficient of variation, principal component analysis and correlation, six traits including total plant dry matter, shoot dry matter, root dry matter, total nitrogen accumulation, shoot nitrogen accumulation and nitrogen absorption efficiency were used as screening indicators. According to the Heatmap clustering analysis and the nitrogen efficiency comprehensive index, two germplasms (Lu05R59 and CCRI 69) were identified as low nitrogen tolerant and nitrogen efficient, and two germplasms (Coker 201 and Xinluzhong 30) as low nitrogen sensitive and nitrogen inefficient. The results of field experiment were consistent with the results of the hydroponic culture at the seedling stage. [Conclusion] It was finally determined that Lu05R59 and CCRI 69 were the low nitrogen tolerant and nitrogen efficient germplasms, and Coker 201 and Xinluzhong 30 were low nitrogen sensitive and nitrogen inefficient germplasms. The results of these studies provide the possibility for screening and rapid identification of nitrogen use efficiency in cotton at the seedling stage, and provide the ideal materials and theoretical basis for further study of cotton nitrogen efficient.