Vaccination of the brushtail possum (Trichosurus vulpecula) against Mycobacterium bovis infection with bacille Calmette-Guérin: the response to multiple doses.

In New Zealand, the brushtail possum (Trichosurus vulpecula) is the principal wildlife vector of bovine tuberculosis. Control of infected possum populations contributes to the control of tuberculosis in domestic livestock. Vaccination is potentially a complementary strategy to population control, but to be cost-effective, administration of the vaccine to possums would need to be from an appropriately designed automatic vaccinator. Possums themselves would activate the vaccinator so that it would deliver an aerosol spray of vaccine. There would be no direct way to prevent possums receiving multiple doses of vaccine. This study examined the effect on protective immunity of repeated vaccination. Captive possums were vaccinated with BCG strain pasteur 1173P2 either 12 times at weekly intervals, twice at 6-weekly intervals, or once. Vaccination was by a combination of intranasal aerosol and conjunctival instillation. Eight weeks after the last dose of vaccine, all possums were challenged intratracheally with Mycobacterium bovis strain 83/6235. Vaccination induced a significant immune response as measured by the lymphocyte proliferation assay (LPA). A significant level of protection, as measured by the response to challenge, developed in all the vaccinated possum groups, but protection was greatest in the group vaccinated 12 times. It was concluded that protection would be enhanced if vaccinations were repeated at short intervals (weekly), but no benefit or detriment resulted from revaccination after longer intervals (1-2 months).     

Environmental and behavioural factors affecting the prevalence of foot lameness in New Zealand dairy herds - a case-control study

A case-control study of environmental and behavioural factors influencing foot lameness was undertaken on 62 dairy herds comprising an average of 185 milking cows in Taranaki, New Zealand. Thirty two case herds were identified as having had at least 10 per cent of the cows lame during the milking season in which the herd was studied, and thirty control herds were selected on the basis that no more than 3 per cent of cows in these herds had been lame per year for at least two years immediately prior to investigation. Each herd was visited at both a morning and an afternoon milking, and 58 risk factors were measured between the time the farmer began to assemble the cows for milking and the completion of milking. Comparison of single variables between case and control herds identified 24 which showed differences (p<0.10). These variables were then subjected to stepwise multivariate logistic regression, and statistically significant variables in this analysis were used to create a tentative path diagram of possible causal web relationships between the various risk factors and the outcome variable, the lameness prevalence level. Information from a review of the published literature was used to include further variables to the 24 into the initial (or null hypothesis) path model. Logistic path analysis was then used to eliminate non-significant paths from the diagram, leaving 19 arrows joining 13 variables in the final path diagram, compared with 33 joining 20 variables in the initial version. The most influential variables in explaining variation between case and control herds were the average level of maintenance of the track and the degree of patience shown by the farmer in bringing the cows in for milking. Overall, factors associated with the movement of animals to the milking shed explained 40 per cent of the variation (deviance) with regard to the lameness prevalence level. Risk factors associated with characteristics of the milking process explain 24 per cent, and risk factors associated with characteristics of the cows in the herd explain 9.5 per cent. Recommendations are made on management changes which deserve further investigation as ways of reducing lameness problems in dairy herds.     

An economic evaluation of the differences between intensive and extensive beef production systems

A model to evaluate economic criteria involved when cattle are raised on high-forage diets prior to finishing or finished directly after weaning was developed using data from two experiments. In Exp. 1, each year for 3 yr, 136 Charolais-cross calves were weaned and allotted to either an intensive system, in which they were immediately finished on a high-grain diet, or an extensive system, in which they were wintered on crop residues, grazed on summer pasture and finished on a high-grain diet. In Exp. 2, 160 British breed steers were wintered, in one of eight different wintering systems utilizing crop residues, using supplemental protein and(or) alfalfa hay. After wintering, the steers grazed summer pasture and then were finished on a high-grain diet. Overall cost of gain and final "break-even" price were lower for cattle finished through the extensive system except when the price of corn was very low in relationship to other inputs. Interest costs were higher for cattle in the extensive system. Increasing the feeder calf purchase price had almost no effect on differences between the systems. Corn price and purchase price affected both systems similarly, whereas interest rate, wintering yardage and finishing yardage affected each system differently. Because of the additional weight produced through the extensive system, it yielded lower final "break-even" prices in most situations.     

In vitro effects of bethanechol on specimens of intestinal smooth muscle obtained from the duodenum and jejunum of healthy dairy cows

OBJECTIVE: To describe the in vitro effects of bethanechol on contractility of smooth muscle preparations from the small intestines of healthy cows and define the muscarinic receptor subtypes involved in mediating contraction. SAMPLE POPULATION: Tissue samples from the duodenum and jejunum collected immediately after slaughter of 40 healthy cows. PROCEDURES: Cumulative concentration-response curves were determined for the muscarinic receptor agonist bethanechol with or without prior incubation with subtype-specific receptor antagonists in an organ bath. Effects of bethanechol and antagonists and the influence of intestinal location on basal tone, maximal amplitude (A(max)), and area under the curve (AUC) were evaluated. RESULTS: Bethanechol induced a significant, concentration-dependent increase in all preparations and variables. The effect of bethanechol was more pronounced in jejunal than in duodenal samples and in circular than in longitudinal preparations. Significant inhibition of the effects of bethanechol was observed after prior incubation with muscarinic receptor subtype M(3) antagonists (more commonly for basal tone than for A(max) and AUC). The M(2) receptor antagonists partly inhibited the response to bethanechol, especially for basal tone. The M(3) receptor antagonists were generally more potent than the M(2) receptor antagonists. In a protection experiment, an M(3) receptor antagonist was less potent than when used in combination with an M(2) receptor antagonist. Receptor antagonists for M(1) and M(4) did not affect contractility variables. CONCLUSIONS AND CLINICAL RELEVANCE: Bethanechol acting on muscarinic receptor sub-types M(2) and M(3) may be of clinical use as a prokinetic drug for motility disorders of the duodenum and jejunum in dairy cows.     

Broad range 16S rRNA gene PCR compared to bacterial culture to confirm presumed synovial infection in horses

The objectives of the present study were to evaluate the accuracy of broad range 16S rRNA gene PCR compared to bacterial culture for the detection of synovial infection in horses. The study included 57 synovial fluid samples from horses with presumed synovial infection and a control group consisting of 31 synovial fluid samples originating from clinically normal horses and horses with aseptic synovial inflammation. All samples were analysed by 16S PCR with reverse line blot (RLB) hybridisation. Synovial fluid samples were cultured using conventional agar plate methods (APM) and/or blood culture medium (BCM). The results of the study showed a superior detection rate (89.5%) for 16S PCR with RLB. Bacterial culture had lower sensitivity, but highly acceptable detection rates (77.6%) were observed using BCM. APM had very low sensitivity (37.8%) and infection was never detected by plate isolation without positive incubation in BCM. The highest sensitivity (91.8%) for the detection of synovial infection was achieved when the results of incubation in BCM and 16S PCR were combined. For all the tests, the specificity was higher than 90%.     

Host status of cover crops for root-lesion nematodes (Pratylenchus spp.) associated with apple orchards in South Africa

Journal of Plant Diseases and Protection - The host response of 17 cover crop cultivars to infection by single-species populations of Pratylenchus hippeastri, Pratylenchus vulnus and Pratylenchus...     

Crop rotation sequencing to minimize yield losses of summer-irrigated lowland rice in Myanmar caused by the rice root-knot nematode Meloidogyne graminicola

Abstract

The effect of different rice-based crop rotation sequences on the population densities of Meloidogyne graminicola and on the yield of rice was evaluated in a microplot experiment under lowland rice field conditions. Ten treatments of cropping sequences were grown in four successive growing seasons: continuous growing of the susceptible rice cultivar Thihtatyin (rice-rice-rice-rice), four treatments of 1- season crop rotation sequences (rice-rice-chickpea-rice, rice-rice-black gram-rice, rice-rice-soybean-rice, rice-rice-cowpea-rice), and five treatments of 2-season crop rotation sequences (groundnut-rice-chickpea-rice, green gram-rice-black gram-rice, cowpea-rice-soybean-rice, sesame-rice-cowpea-rice, sunflower-rice-sesame-rice). Population densities of M. graminicola recovered from the rice plants and the nematode multiplication factors (Mf) in the soil in the continuous rice cropping sequence (rice-rice-rice-rice) was the highest among the ten cropping sequences. Lowest nematode Mf in the soil was observed in the 2-season crop rotation sequence sunflower-rice-sesame-rice and the highest was observed in the 1-season crop rotation sequence rice-rice-cowpea-rice among the nine crop rotation sequences. Highest rice yield was obtained in the 2-season crop rotation sequences green gram-rice-black gram-rice, sesame-rice-cowpea-rice and sunflower-rice-sesame-rice, which were about 2 times higher compared with the 1-season crop rotation sequences and about 3 times higher compared with the continuous rice cropping sequence.     

Most fish destined for fishmeal production are food‐grade fish

Marine fisheries target and catch fish both for direct human consumption (DHC) as well as for fishmeal and fish oil, and other products. We derived the fractions used for each for 1950–2010 by fishing country, and thus provide a factual foundation for discussions of the optimal use of fisheries resources. From 1950 to 2010, 27% (~20 million tonnes annually) of globally reconstructed marine fisheries landings were destined for uses other than DHC. Importantly, 90% of fish destined for uses other than DHC are food‐grade or prime food‐grade fish, while fish without a ready market for DHC make up a much smaller proportion. These findings have implications for how we are using fish to feed ourselves or, more appropriately, how we are not using fish to feed ourselves.     

Energy and resource consumption of land-based Atlantic salmon smolt hatcheries in the Pacific Northwest (USA)

This paper evaluates the resource and energy requirements of six different types of land-based, hatchery production systems located in the U.S. Pacific Northwest: flow-through with a gravity water supply, flow-through with a pumped water supply, flow-through with pure oxygen, partial reuse system, partial reuse with heating, and a reuse system for the production of Atlantic salmon (Salmo salar) smolts. Key parameters used in the evaluation include direct energy, indirect energy, transportation energy, greenhouse gas emissions, and pollutant discharges.Power (electricity and natural gas) and feed energy accounted for the majority of the required energy for all the rearing option evaluated. The sum of the fixed capital and chemicals components accounted for less than 2–12% of the total energy budget for any rearing option. The energy efficiency (energy output/energy input) of the six options ranges from 0.97% for flow-through with pumped supply to 3.49% for the flow-through with gravity supply. The rearing options with the three highest energy efficiencies were flow-through with gravity supply (3.49%), partial reuse (2.75%), and reuse (2.64%).On a kg of smolt produced basis, the six rearing options showed a wide range in performance. The reuse system had the lowest water (2 m³ kg^− 1) and land (0.13 m² kg^− 1) requirements and the third lowest total energy requirement (288 MJ kg^− 1). The partial reuse system had the second lowest total power requirement (276 MJ kg^− 1), a low land requirement (0.21 m² kg^− 1), and moderate water requirements (33 m³ kg^− 1). The partial reuse with temperature control had the second highest total power requirement (657 MJ kg^− 1) and land and water requirements similar to the partial reuse system without temperature control. The flow-through system with pumped water supply had the highest water (289 m³ kg^− 1), land (2.19 m² kg^− 1), and energy requirements (786 MJ kg^− 1) of any of the rearing options. By comparison, the flow-through system with gravity water supply had the lowest energy requirement (218 MJ kg^− 1), a moderate land requirement (0.78 m² kg^− 1), and a high water requirement (214 m³ kg^− 1). The ranking of the six rearing options based capital and operating costs are likely to be quite different from those based on energy, water, and greenhouse gas emissions.