DYNAMIC CONTRAST‐ENHANCED MAGNETIC RESONANCE IMAGING OF CANINE BRAIN TUMORS

We evaluated dynamic contrast‐enhanced magnetic resonance imaging (DCE‐MRI) in canine brain tumors. Magnetic resonance data sets were collected on seven canine intracranial tumors with a 3 T magnet using a T1‐weighted fast spin echo fluid attenuated inversion recovery sequence after an IV bolus injection (0.2 mmol/kg) of Gd‐DTPA. The tumors were confirmed histopathologically as adenocarcinoma (n=1), ependymoma (n=1), meningioma (n=3), oligodendroglioma (n=1), and pituitary macroadenoma (n=1) The data were analyzed using a two‐compartment pharmacokinetic model for estimation of three enhancement parameters, E_R (rate of enhancement), K_el (rate of elimination), and K_ep (rate constant), and a model‐free phenomenologic parameter initial area under the Gd concentration curve (IAUGC) defined over the first 90 s postenhancement. Pearson's correlations were calculated between parameters of the two methods. The IAUGC has a relatively strong association with the rate of enhancement E_R, with r ranges from 0.4 to 0.9, but it was weakly associated with K_ep and K_el. To determine whether any two tumors differed significantly, the Kolmogorov–Smirnov test was used. The results showed that there were statistical differences (P<0.05) between distributions of the enhancement pattern of each tumor. These kinetic parameters may characterize the perfusion and vascular permeability of the tumors and the IAUGC may reflect blood flow, vascular permeability, and the fraction of interstitial space. The kinetic parameters and the IAUGC derived from DCE‐MRI present complementary information and they may be appropriate to noninvasively differentiate canine brain tumors although a larger prospective study is necessary.     

Holding Power of Different Pin Designs and Pin Insertion Methods in Avian Cortical Bone

Objective —To measure pullout strength of four pin types in avian humeri and tibiotarsi bones and to compare slow-speed power and hand insertion methods.
Study Design —Axial pin extraction was measured in vitro in avian bones.
Animal Population —Four cadaver red-tailed hawks and 12 live red-tailed hawks.
Methods —The pullout strength of four fixator pin designs was measured: smooth, negative profile threaded pins engaging one or two cortices and positive profile threaded pins. Part 1: Pins were placed in humeri and tibiotarsi after soft tissue removal. Part 2: Pins were placed in tibiotarsi in anesthetized hawks using slow-speed power or hand insertion.
Results —All threaded pins, regardless of pin design, had greater pullout strength than smooth pins in all parts of the study ( P < .0001). The cortices of tibiotarsi were thicker than the cortices of humeri ( P < .0001). There were few differences in pin pullout strengths between threaded pin types within or between bone groups. There were no differences between the pullout strength of pins placed by slow-speed power or by hand.
Conclusions —There is little advantage of one threaded pin type over another in avian humeri and tibiotarsi using currently available pin designs. There were few differences in pin pullout strengths between humeri and tibiotarsi bones. It is possible that the ease of hand insertion in thin cortices minimizes the potential for wobbling and therefore minimizes the difference between slow-speed drill and hand insertion methods.
Clinical Relevance —Threaded pins have superior bone holding strength in avian cortices and may be beneficial for use with external fixation devices in birds.     

Epoxy Putty for Free-Form External Skeletal Fixators

Objective —To evaluate the suitability of epoxy putty for use as a connecting beam material in a free-form external skeletal fixator.
Design —Mechanical evaluation of beams and the pin-material interface of commonly used methacrylates and the proposed epoxy putty.
Procedure —The apparent modulus, bending strength, and toughness of 10 beams of three methacrylates (Technovit, APEF System, Bone Cement) and three epoxy putties (Oatey Epoxy Putty, All-Metals PowerPoxy, and Plumber's PowerPoxy) were determined in three-point bending. The shear strength of smooth and roughened-shaft pins embedded in the three methacrylates and the Oatey Epoxy Putty was determined by pull-out testing.
Results —The epoxy putties had similar strength, greater apparent modulus, and reduced toughness when compared with the methacrylates. The shear strength of the smooth pin interface with the Oatey Epoxy putty was greater than that with the methacrylates. The interface with roughened pins was much stronger than that with smooth pins for all materials tested.
Clinical Relevance —Epoxy putty is a suitable material for free-form external fixators. It is easy to handle, inexpensive, and has suitable setting times and mechanical properties.     

Biomechanical Comparison of the Trocar Tip Point and the Hollow Ground Tip Point for Smooth External Skeletal Fixation Pins

Objective —To compare the insertional characteristics of external fixator pins with hollow ground (HG), modified HG, and trocar (T) points.
Study Design —An acute, in vitro biomechanical evaluation.
Sample Population—Thirteen radii from canine cadavers.
Methods —A total of 16 T-tipped and 16 HG-tipped pins were inserted into 8 canine radii. Ten pins of each modification of the HG tip (length of the cutting edge reduced by 0.127 mm and 0.254 mm, respectively) were inserted into another five radii. All pins were inserted with low-speed power drilling and 80 N drilling load. Differences between peak tip temperature, drilling energy, and pullout force were determined for each pin type at both diaphyseal and metaphyseal locations.
Results —HG-tipped pins showed a 40% lower tip temperature in diaphyseal bone, a 25% reduction in drilling energy in diaphyseal bone, and a reduction of pullout force in both diaphyseal (65%) and metaphyseal (50%) bone compared with T-tipped pins. HG 0.254-mm pins generated higher tip temperatures and had greater pullout than HG pins in diaphyseal bone.
Conclusions —The HG tip was a more efficient design; however, the reduction in pullout force suggests that, because a better hole was drilled, radial preload is reduced. Reduction of the cutting edge by 0.254 mm increased the pullout force but also increased the temperatures.
Clinical Relevance —Thermal and microstructural damage are reduced by the HG tip, but pin-bone interface stability is also compromised. The use of a tip with 0.254 mm reduction in the cutting edge may optimize the biological and mechanical factors at the pin-bone interface.     

Hemodynamic Function during Neurectomy in Halothaneanesthetized Horses with or without Constant Dose Detomidine Infusion

Nine horses were premediated with acepromazine, and anesthesia was induced with guaifenesin and thiamylal. Anesthesia was maintained in four horses with halothane in oxygen, and in five horses with halothane in oxygen plus a constant dose infusion of detomidine. Both maintenance regimens produced a MAC equivalent of 1.4 at the ambient barometric pressure. Hemodynamic and respiratory measurements were made after the horses were anesthetized, during surgical manipulations involving skin or tissues other than nerves, during manipulation and transection of digital nerves, and after surgery while the limbs were being bandaged. Heart rate was significantly higher in horses anesthetized with halothane only than in horses that also received detomidine; there were no other differences in hemodynamic function or recovery characteristics. Respiratory rate was significantly higher than baseline during soft tissue and nerve manipulations; arterial blood pressure was significantly higher after surgery began and highest during neurectomy; cardiac output and cardiac index were significantly decreased during surgery; systemic vascular resistance was significantly increased during neurectomy and bandaging and highest during neurectomy. The data suggest that the increase in blood pressure often associated with surgical stimulation is caused by increased vascular resistance and may be accompanied by a decrease in cardiac output.     

MAGNETIC RESONANCE IMAGING CHARACTERISTICS OF ASCENDING HEMORRHAGIC MYELOMALACIA IN A DOG

A 4-year-old neutered female terrier-cross was evaluated for an acute onset of paraplegia. Utilizing magnetic resonance (MR) imaging, the cause of the neurologic deficits was determined to be a lumbar intervertebral disc extrusion. The MR study additionally demonstrated parenchymal hyperintensity on T2-weighted images and similarly located diffuse hypointensity on gradient echo images, cranial and caudal to the compressive extradural lesion. Hemorrhagic myelomalacia was suspected based on these MR characteristics, which was subsequently confirmed surgically and histopathologically.     

Placement of Multiple Full Pins for External Fixation Technique and Results in Four Dogs

A technique using a third bar and guide clamp was developed to permit reduction and stabilization of distal limb fractures with full pins and two connecting bars, one on each side of the bone. The system uses only single Kirschner clamps. Four distal limb fractures were stabilized using this technique. Closed reduction was used in three dogs to avoid devitalization of fragments and avoid contamination of a closed fracture. The fracture site stability achieved with this configuration allowed early return to weight bearing and rapid bone healing.