合成氨基酸对肉鸡肠道功能的改善作用

鸡球虫病、坏死性肠炎等肠道感染可能对消化道内源性氨基酸损失产生较大影响。虽然对这一课题的了解不多，但相关文献报道了这些疾病对氨基酸表观回肠消化率的影响。在确定肠内氨基酸流动时必须考虑多种因素，包括肉鸡的年龄、是否有病原体、肠内氨基酸代谢等。胃肠道和肝脏共同承担向外周血释放氨基酸的任务，这些氨基酸是支持蛋白质合成所必需的。一般来说，肠道是氨基酸代谢反应的一个非常活跃的器官系统，它首先会满足自身对氨基酸的需求，然后才会将氨基酸输送到机体其他部分。因此，本综述旨在讨论影响肠内氨基酸流动的因素及日粮氨基酸和肠道感染对氨基酸利用和代谢的影响。     

5种生物制剂对马铃薯种薯萌芽、极端天气下植株生长和产量性状的影响

旨在满足马铃薯生产中茬口衔接、机械化生产技术应用、不利气候下稳产等对马铃薯出苗早、齐、壮的需求,以‘费乌瑞它’为供试品种,用基于有益活菌或工程菌提取物的5种生物制剂进行种薯处理,对多重性状进行了对比分析。5种生物制剂较常规化学制剂,均能够不同程度地促进种薯萌芽和芽根同生,出苗期提前2~7天,播种后49天的出苗率提高3.33%~17.78%。其中,表现最好的为酵母核苷酸衍生物和VDAL,种薯萌发和生根均显著高于对照。霜冻后,生物剂拌种处理在恢复前期促进植株生长,由此促进恢复后期的块茎发育,较常规化学处理增产8.39%~24.03%,体现了不同程度的保产效果。多马道黑、酵母核苷酸衍生物、根肽和VDAL体现出较好的保产效果,可作为种薯处理剂投入马铃薯生产。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

经济林良种推广现状及政策建议

经济林良种是经济林产业的“芯片”,是经济林生产优质、高产、高效的物质基础。完善经济林良种推广政策,是实现经济林产业高质量发展的根本保障。通过数据收集和整理,系统梳理全国经济林良种推广现状,指出经济林良种推广中还存在着良种使用率不高,经济林低产低效;部分经济林良种存在超范围推广;良种审定过多,结构性过剩和种植品种过多,对接生产加工不畅等突出问题。进而提出从以种植为目标的良种推广转变为以生产加工等市场需求为导向的良种推广思路。从优化良种供给、加强良种推广的宏观指导、强化科技支撑和宣传培训、实施经济林提质增效工程和充分发挥产业协会、创新联盟的作用等方面给出优化经济林良种推广的政策建议。     

氮钾浓度对烤烟苗期生长特性的影响

探究氮钾浓度对烟苗生理生化特性的影响,为烟叶苗期氮钾营养平衡提供参考依据.采用水培法,利用基础Hoagland营养液,设置5个不同氮钾浓度处理,分析处理间烟苗的生理生化指标差异.结果表明,氮浓度对烟苗干物质、叶绿素的积累有显著影响,在相同钾浓度下,随着氮浓度的增加,烟苗干物质、叶绿素含量、根系活力显著增加.不同氮水平下,低钾处理间的根系MDA含量、叶片GS活性差异显著.K+对烟苗叶绿素的合成、根系活力、GS活性有一定的促进作用.高氮水平下,高浓度K+会使根系活力、叶片可溶性蛋白含量下降.     

反刍动物高能量饲料添加剂脂肪酸钙制作工艺参数筛选

以猪脂肪、氢氧化钠、氯化钙为原料,在实验室条件下探索脂肪酸钙的加工工艺和加工过程。利用正交试验设计(L_(16)4~5)对脂肪酸钙的加工工艺系数进行反复筛选,探索脂肪酸钙的最佳加工工艺参数。结果表明,脂肪酸钙的最佳加工工艺参数为氢氧化钠用量占脂肪重的27%、氯化钙用量占脂肪重的25%、皂化反应时间为5h、复分解温度为90℃、用水量为脂肪的4倍。     

不同杀青方式龙井茶自动化连续生产线加工工艺探讨

文章剖析了不同杀青方式龙井茶自动化连续生产线的设备配置和工艺流程,对生产线的龙井茶品质进行感官评价,为龙井茶生产线推广应用提供借鉴。     

Impact of grassland contract policy on soil organic carbon losses from alpine grassland on the Qinghai–Tibetan Plateau

Carbon storage in the soils on the Qinghai–Tibetan Plateau plays a very important role in the global carbon budget. In the 1990s, a policy of contracting collective grasslands to smaller units was implemented, resulting in a change from the traditional collective grassland management to two new management patterns: a multi‐household management pattern (MMP: grassland shared by several households without enclosures) and a single‐household management pattern (SMP: grassland enclosed and used by only one household). In 2016, 50 MMP and 54 SMP winter pastures on the Qinghai–Tibetan Plateau were sampled to assess the differences in soil organic carbon (SOC) between the two management patterns. Results showed that average SOC was significantly greater under MMP than under SMP, with an estimated 0.41 Mg C/ha/yr lost due to SMP following the new grassland contract. Based on the government's grassland policy, four grassland utilization scenarios were developed for both summer and winter pastures. We found that if the grassland were managed under SMP, likely C losses ranged between 0.31 × 10⁷ and 6.15 × 10⁷ Mg C/yr across the Qinghai–Tibetan Plateau relative to MMP, which more closely resembles pre‐1990s grassland management. Previous estimates of C losses have only considered land use change (with cover change) and ignored the impacts driven by land management pattern changes (without cover change). The new data suggest that C losses from the Qinghai–Tibetan Plateau are greater than previously estimated, and therefore that the grassland contract policy should be reviewed and SMP households should be encouraged to reunite into the MMP. These findings have potential implications for land management strategies not only on the Qinghai–Tibetan Plateau but also other grazing regions globally where such practices may exist.     

Identification and quantification of anthocyanins in different coloured cultivars of ornamental kale (Brassica oleracea L. var. acephala DC)

Anthocyanins are responsible for the colour of many fruits, vegetables, flowers, and coloured-leaved trees. Ornamental kale (Brassica oleracea L. var. acephala DC) is widely cultivated for its colourful inner leaves. To investigate the relationship between the degree of colouration and anthocyanin distribution, content, and composition in ornamental kale, the authors studied the pigment characteristics of five cultivars with different coloured leaves (white, pink, red, purple, and purple-black). Microscopy observation, spectrophotometer, and high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of fresh inner leaves revealed that pink, red, and purple colourations were associated with high levels of anthocyanin, while purple-black was the result of the combination of anthocyanins and chlorophyll. In the coloured cultivars, anthocyanins were abundant mainly in the first and second cell layers below the epidermis in both the hypocotyls and inner leaves. No anthocyanin was found in the white-leaved phenotype cultivar. Anthocyanin content increased as leaf colour deepened from pink, red, to purple cultivars, which had little chlorophyll and carotenoid. The authors identified eight anthocyanins in the four coloured cultivars, including one non-acylated, four monoacylated, and three diacylated cyanidin glycosides. Cyanidin-3-(sinapoyl)(feruloyl)-diglucoside-5-glucoside was the most abundant anthocyanin in the four coloured cultivars followed by cyanidin-3-(sinapoyl)-diglucoside-5-glucoside. The analysis of anthocyanin accumulation characterisation provides important information on evaluating colouration patterns in coloured plants, and will be helpful for breeding desired leaf colours in ornamental kale.     

日光温室新型装配式骨架节点设计与有限元分析

为实现日光温室骨架的装配化,把控安装质量,提高温室骨架受力性能,设计完成了日光温室新型装配式骨架及装配式节点,以期为装配式日光温室提供新的研究思路.利用ANSYS Workbench软件建模辅助分析,比选外套管和内插管2种装配方式,在逐级均布荷载作用下主管和套管所受应力、剪力及弯矩情况;用Workbench软件分析装配式骨架在最不利荷载作用下轴向应力、剪力、弯矩及变形情况.结果 表明:骨架在外套管的装配方式下,主管及套管自身所受的轴向应力和弯矩更小,安全性更高.用外套管装配的三段桁架在最不利荷载组合作用下,最大轴向应力17.35MPa,最大变形量为0.26 mm,套管最大轴向应力5.0 MPa,最大剪力2345.3 N,最大弯矩为41.3N·m.该日光温室新型装配式骨架及装配式节点安全、稳定、变形量小,可推广使用.