Evaluation of Cold Tolerance in NERICAs Compared with Japanese Standard Rice Varieties at the Reproductive Stage

New Rice for Africa (NERICA) is a general name for interspecific rice varieties derived from a cross between the high‐yielding Asian rice (Oryza sativa L.) between locally adapted African rice (Oryza glaberrima Steud.). Eight NERICAs were evaluated for cold tolerance (CT) at the reproductive stage and compared with their O. sativa parents and three Japanese standard rice varieties over 3 years. Cold tolerance was evaluated based on the filled grain ratio (FGR) after cold water irrigation. The FGR was greatly reduced by cold water irrigation. NERICA 1, 2 and 7 had higher FGR (51.9–57.9 %), while NERICA 6, 15 and 16 had lower FGR (6.2–14.5 %). NERICA 1, 2 and 7 were less affected by cold stress, with a 31 % mean reduction in FGR, while NERICA 6, 15 and 16 were greatly affected, with their FGRs being reduced by more than 80 %. NERICA 3 and 4 were moderately affected by cold stress, with about 45 % reduction rate in FGR. FGR significantly influenced the grain weights of the varieties with strong positive correlations (r = 0.83–0.91; P < 0.001), and thus, similar trends in grain weights were observed. Grain weights were reduced by 61.7–96.4 % under cold stress. NERICA 1, 2 and 7 showed significantly better performance than NERICA 3 and 4, while NERICA 6, 15 and 16 performed poorly under cold water irrigation. The Japanese varieties Koshihikari (very tolerant) and Ozora (moderately tolerant) were more affected by cold water irrigation than NERICA 1, 2 and 7. On the basis of the mean reduction rate (%) in FGR under cold stress, the varieties were classified as follows: NERICA 1, 2 and 7 as tolerant; NERICA 3 and 4 as moderately tolerant; and NERICA 6, 15 and 16 as susceptible to cold stress. However, NERICA 7 grain yields were lower under cold stress due to both greatly reduced number of panicles per plant and number of spikelets per panicle. Therefore, NERICA 1 and 2 are suitable candidates for production in the highland regions of East Africa and should be promoted for production.     

Changes in rat uterine and cervical phospholipase A2 activity following progesterone agonist or antagonist administration at term

Our previous study revealed that a fall in plasma progesterone (P(4)) level was associated with a transient increase in cytosolic phospholipase A(2) (PLA(2)) activity and prostaglandin F(2)alpha level in the rat uterus and cervix during natural parturition. This study determined the changes in the PLA(2) activities during modulated occurrence of delivery by P(4) antagonist or agonist late in pregnancy. In rats undergoing P(4) antagonist-induced preterm delivery, the PLA(2) activities of both uterine and cervical cytosol significantly decreased 12 h after the challenge and tended to be attenuated within 72 h. The plasma P(4) level altered in a similar pattern. Blockade of delivery by chronic treatment with P(4) agonist was not associated with changes in uterine PLA(2) activity compared with that in normally delivering rats, although there was a persistent rise in cervical PLA(2) activity. The obtained data indicates that the PLA(2) activities in rat uterine and cervical cytosol are not regulated solely by P(4) and that delivery can occur without activation of this enzyme.     

Studies on the effect of humic acid on availability of phosphorus

It is believed that some organic compounds form complexes with iron and aluminum and prevent the fixation of phosphate applied to soils.     

Classification of cassava into ‘bitter’ and ‘cool’ in Malawi: From farmers' perception to characterisation by molecular markers

Cassava roots, a major food in Africa, contain cyanogenic glucosides that may cause toxic effects. Malawian women farmers considered fields of seemingly similar cassava plants to be mixes of both ‘cool’ and ‘bitter’ cultivars. They regard roots from ‘cool’ cultivars as non-toxic. Roots of ‘bitter’ were considered to require extensive traditional processing done by women to be safe for consumption. But curiously, these women farmers preferred ‘bitter’ cultivars since toxicity confers protection against theft, which was a serious threat to the food security of their families. We studied how well these farmers comprehend the effects of genetic variations in cassava when dealing with cyanogenesis in this complex system. Using molecular markers we show that most plants farmers identified as belonging to a particular named cultivar had a genotype typical of that cultivar. Farmers' ethno-classification into ‘cool’ and ‘bitter’ cultivars corresponded to a genetic sub-division of the typical genotypes of the most common cultivars, with four-fold higher cyanogenic glucoside levels in the bitter cultivars. Examining morphology, farmers distinguished genotypes better than did the investigators when using a standard botanical key. Undoubtedly, these women farmers grasp sufficiently the genetic diversity of cassava with regard to cyanogenesis to simultaneously benefit from it and avoid its dangers. Consequently, acyanogenic cassava – the breeding of which is an announced good of some cassava genetic improvement programmes – is not a priority to these farmers. Advances in molecular genetics can help improve food supply in Africa by rapid micropropagation, marker assisted breeding and introduction of transgenic varieties, but can also help to elucidate tropical small-scale farmers' needs and skills. This revised version was published online in August 2006 with corrections to the Cover Date.     

Species identification method for <Emphasis Type="Italic">Scombrops boops</Emphasis> and <Emphasis Type="Italic">Scombrops gilberti</Emphasis> based on polymerase chain reaction-restriction fragment length polymorphism analysis of mitochondrial DNA

ABSTRACT:   Gnomefish Scombrops boops and Scombrops gilberti are commercially important fishes in Japan, but these species are often confused in the markets because of their morphological similarity. To identify these two species, we performed nucleotide sequencing and restriction fragment length polymorphism (RFLP) analysis on 16S ribosomal RNA (rRNA) gene and the control region in mitochondrial DNA. Five and 12 nucleotide substitutions were observed between species in the 777-bp 16S rRNA gene and 471-bp control region, respectively. Diagnostic restriction sites for discriminating between S. boops and S. gilberti were found in the 16S rRNA gene, but not in the control region. Polymerase chain reaction (PCR)–RFLP analysis using two enzymes, Eco NI and Mva I, clearly discriminated between S. boops and S. gilberti identified by meristic characters. The PCR–RFLP analysis identified most of the 168 Scombrops young caught in the coastal waters of the Izu and Miura peninsulas as S. boops , suggesting that S. gilberti juveniles are rare in this area.     

Discrimination of three amphistome species by PCR-RFLP based on rDNA ITS2 markers

Three bovine amphistomes, Calicophoron calicophorum, Orthocoelium streptocoelium and Homalogaster paloniae, are common in Japan. This study was carried out to describe ITS2 sequences in the 3 species, and to evaluate a PCR-RFLP technique based on ITS2 sequence for the species identification in single eggs of the parasites. The ITS2 sequences of the three species contained 19 variable sites including one gap. The sequence difference between species was 4.2-5.3%. The three species of amphistomes were identified based on the difference in the restriction sites of Acc II on the ITS2 sequence.     

A study of lignification in loblolly pine tracheids by the SEM-EDXA technique

Summary The lignification process in different morphological regions of loblolly pine tracheids was studied by the SEM-EDXA technique. Prior to S₂ layer formation, lignification was initiated in the cell corner middle lamella and compound middle lamella regions. Subsequently a rapid lignin deposition was observed in both regions, whereas secondary wall lignification was a more gradual process and initiated when the middle lamella lignin concentration was approximately 50% of maximum. Within the secondary wall, the S₁ layer is lignified first. Then, lagging just behind cell wall formation, lignification of the S₂ layer is initiated adjacent to the S₁ layer and extends toward the lumen. Finally, the S₃ layer lignified. Upon completion of lignification, the cell walls had a higher concentration of lignin in both the S₁ and S₃ layers than in the S₂ layer.This Paper is an excerpt from the Ph.D. dissertation of Shiro Saka     

Topochemistry of delignification in Douglas-fir wood with soda,soda-anthraquinone and karft pulping as determined by SEM-EDXA

Summary Delignification studies on 0.5 m sections of Douglas-fir earlywood tracheids pulped by soda, soda-anthraquinone (soda/AQ) and kraft pulping processes were performed by determining bromine concentrations in various morphological regions with SEM-EDXA technique. Soda/AQ pulping was much more selective in removing lignin from the middle lamella regions than either soda or kraft pulping. However, up to 50% delignification, more lignin was removed from the secondary wall by soda or kraft, compared to soda/AQ pulping. The kinetics of lignin removal in the various morphological regions were established. Addition of AQ and sodium sulfide resulted in an earlier transition from a slow initial to a rapid bulk delignification, particularly in the middle lamella, and in an enhanced bulk delignification in the secondary wall. Anthraquinone was also found to promote residual delignification in the secondary wall, where sodium sulfide was not effective. The opposite was observed for the bulk delignification in the middle lamella, where only sodium sulfide addition improved the rate significantly. The great differences observed in the bulk delignification rates between middle lamella and secondary wall in soda pulping as well as their response to additives suggest structural differences between middle lamella and secondary wall lignins.Paper No. 6712 in the Journal Series of the North Carolina Agricultural Research Service, Raleigh, North Carolina. The paper, an excerpt from the Ph. D. dissertation of Shiro Saka, was selected for the second place Wood Award for 1980 cosponsored by Forest Products Research Society and the Kirby Forest Industries, Inc., Houston, Texas, and presented at the American Chemical Society Annual Meeting, Las Vegas, Nevada, August, 1980     

GC-MS and IR spectroscopic analyses of the lignin-derived products from softwood and hardwood treated in supercritical water

Softwood (Cryptomeria japonica) and hardwood (Fagus crenata) were treated in supercritical water (380°C, 100 MPa) for 8 s. The treated woods were fractionated to the water-soluble portion, methanol-soluble portion, and methanol-insoluble residues. For the methanol-soluble portion, which mainly consisted of lignin-derived products, gel permeation chromatography (GPC) and gas chromatographic-mass spectrometric (GC-MS) analyses were conducted to clarify the molecular weight distribution and to identify the monomeric products, respectively. GPC analysis revealed that the methanol-soluble portion contains monomeric and some oligomeric products. GC-MS analysis identified 19 guaiacyl compounds in the methanol-soluble portion from softwood, and 15 syringyl monomeric compounds in the methanol-soluble portion from hardwood. The structures of identified products included not only phenyl propane (C₆—C₃) units but also C₆—C₂ and C₆—C₁ units. In addition, the infrared spectra suggested that the methanol-soluble portion maintains the typical structure of lignin, although it is rich in condensed-type linkages with some changes in the propyl side chain. These results indicate that the supercritical water treatment cleaves not only ether linkages but also part of the propyl chains in lignin to give various aromatic compounds.     

Decomposition behavior of woody biomass in water-added supercritical methanol

The chemical conversion of Japanese beech (Fagus crenata Blume) in water-added supercritical methanol was studied for a wide range of water content using a batch-type reaction vessel to obtain chemicals from lignocellulosics. It was consequently found that addition of water enhanced the decomposition of wood cell wall components; cellulose, hemicelluloses, and lignin. In cases of high water content, however, it resulted in low solubility of lignin-derived products causing an increase in the mass of the residue. The water content was thus optimized to be around 10% (v/v) for the decomposition of wood. Concomitantly, the yields and selectivity of the chemicals from wood could be regulated by the addition of water, especially for the lignin-derived products. As a result, the monomeric compounds of lignin, coniferyl alcohol and sinapyl alcohol, were recovered as their γ-methyl ethers in the presence of water in higher yields than those obtained without addition of water.