排序方式: 共有12条查询结果,搜索用时 31 毫秒
1.
Biswas A Adhvaryu A Gordon SH Erhan SZ Willett JL 《Journal of agricultural and food chemistry》2005,53(24):9485-9490
Specialty chemicals based on renewable resources are desirable commodities due to their eco-friendly nature and "green" product characteristics. These chemicals can demonstrate physical and chemical properties comparable to those of conventional petroleum-based products. Suitably functionalized amines in the triacylglycerol structure can function as an antioxidant, as well as an antiwear/antifriction agent. In addition, the amphiphilic nature of seed oils makes them an excellent candidate as base fluid. The reaction of amine and epoxidized seed oils in the presence of a catalyst almost always leads to different intra/intermolecular cross-linked products. In most cases, the triacylglycerol structure is lost due to disruption of the ester linkage. Currently, there is no reported literature describing the aminolysis of vegetable oil without cross-linking. Here the epoxy group of the epoxidized soybean oil has been selectively reacted with amines to give amine-functionalized soybean oil. The optimization procedure involved various amines and catalysts for maximum aminolysis, without cross-linking and disruption of the ester linkage. Diethylamine and ZnCl2 were found to be the best. NMR, IR, and nitrogen analysis were used to characterize the products. 相似文献
2.
The two-step syntheses of the cyclic carbonates carbonated methyl oleate (CMO) and carbonated methyl linoleate (CML) are reported. First, synthesis of epoxides through well-precedented chemical reactions of unsaturated fatty methyl esters with hydrogen peroxide and formic acid was accomplished. Next, a carbonation reaction with a simple tetrabutylammonium bromide catalyst was performed, allowing the direct incorporation of carbon dioxide into the oleochemical. These syntheses avoid the use of the environmentally unfriendly phosgene. The carbonated products are characterized by IR, 1H NMR, and 13C NMR spectroscopy and studied by thermogravimetric analysis (TGA). Also reported is the synthesis of a similar cyclic carbonate from the commercially available 2-ethylhexyl epoxy soyate. These carbonates show properties that may make them useful as petrochemical replacements or as biobased industrial product precursors. 相似文献
3.
Preparation of soybean oil-based greases: effect of composition and structure on physical properties
Vegetable oils have significant potential as a base fluid and a substitute for mineral oil in grease formulation. Preparation of soybean oil-based lithium greases using a variety of fatty acids in the soap structure is discussed in this paper. Soy greases with lithium-fatty acid soap having C12-C18 chain lengths and different metal to fatty acid ratios were synthesized. Grease hardness was determined using a standard test method, and their oxidative stabilities were measured using pressurized differential scanning calorimetry. Results indicate that lithium soap composition, fatty acid types, and base oil content significantly affect grease hardness and oxidative stability. Lithium soaps prepared with short-chain fatty acids resulted in softer grease. Oxidative stability and other performance properties will deteriorate if oil is released from the grease matrix due to overloading of soap with base oil. Performance characteristics are largely dependent on the hardness and oxidative stability of grease used as industrial and automotive lubricant. Therefore, this paper discusses the preparation methods, optimization of soap components, and antioxidant additive for making soy-based grease. 相似文献
4.
Süleyman Korkut Derya Sevim KorkutDuygu Kocaefe Diego ElustondoAgron Bajraktari Nevzat Çak?c?er 《Industrial Crops and Products》2012,35(1):287-294
The concept of thermal modification has evolved from a challenging research program to commercial reality in several European countries in recent years. The aim of this study is to determine the change of various physical properties (oven-dry density, air-dry density, weight loss, swelling and anti-swelling efficiency (ASE)), compression strength parallel to grain, colour difference (ΔE), glossiness and surface roughness of narrow-leaved ash (Fraxinus angustifolia Vahl.) and chestnut (Castanea sativa Mill.) woods after heat treatment under different temperatures and durations. For this study two different temperatures (160 °C and 180 °C) and two different durations (2 h and 4 h) were considered. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements by the stylus method were made in the direction perpendicular to the fiber. Four main roughness parameters which are mean arithmetic deviation of profile (Ra), mean peak-to-valley height (Rz), root mean square roughness (Rq), and maximum roughness (Ry) obtained from the surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. The properties studied were significantly different (p = 0.05) at two temperatures and two durations of heat treatment. Based on the findings of this study, the results showed that oven-dry density, air-dry density, swelling, compression strength parallel to grain and surface roughness decreases with increasing heat treatment temperature and time. 相似文献
5.
Erhan SZ Sharma BK Liu Z Adhvaryu A 《Journal of agricultural and food chemistry》2008,56(19):8919-8925
The environment must be protected against pollution caused by lubricants based on petroleum oils. The pollution problem is so severe that approximately 50% of all lubricants sold worldwide end up in the environment via volatility, spills, or total loss applications. This threat to the environment can be avoided by either preventing undesirable losses, reclaiming and recycling mineral oil lubricants, or using environmentally friendly lubricants. Vegetable oils are recognized as rapidly biodegradable and are thus promising candidates as base fluids in environment friendly lubricants. Lubricants based on vegetable oils display excellent tribological properties, high viscosity indices, and flash points. To compete with mineral-oil-based lubricants, some of their inherent disadvantages, such as poor oxidation and low-temperature stability, must be corrected. One way to address these problems is chemical modification of vegetable oils at the sites of unsaturation. After a one-step chemical modification, the chemically modified soybean oil derivatives were studied for thermo-oxidative stability using pressurized differential scanning calorimetry and a thin-film micro-oxidation test, low-temperature fluid properties using pour-point measurements, and friction-wear properties using four-ball and ball-on-disk configurations. The lubricants formulated with chemically modified soybean oil derivatives exhibit superior low-temperature flow properties, improved thermo-oxidative stability, and better friction and wear properties. The chemically modified soybean oil derivatives having diester substitution at the sites of unsaturation have potential in the formulation of industrial lubricants. 相似文献
6.
This study was done to assess the effect of the colouration of the red zebra cichlid (Maylandia estherae), using beet root red (Beta vulgaris ruba) and henna (Lawsonia inermis). The fish with an average weight of 1.21 ± 0.69 g was placed in 12 aquariums. Fifteen fish were placed in each aquarium. The fish were fed with diets which were without carotenoid supplement (AK), containing astaxanthin (AA), beet root red (AP) and henna (AI). Except the AK, each group contained 50 mg/kg carotenoid additives. As a result of the experiment, total carotenoid values between groups were not significant (p > .05). The redness (a*) value of groups was significant (p < .05), and the values of brightness (L*) and yellowness (b*) were not significant (p > .05). Samples were kept in the freezer at ?20°C for 120 days to see whether the fish kept their colour. All groups decreased compared with the 50th day. This difference in groups except the AP was significant (p < .05). The FCR, SGR and weight gain% was not significant (p > .05). The survival was 97.28%, and it was the same in all groups. The study concluded that natural carotene sources with lower costs had similar effects with astaxanthin. 相似文献
7.
Sharma BK Adhvaryu A Perez JM Erhan SZ 《Journal of agricultural and food chemistry》2005,53(8):2961-2968
The biodegradable properties and lubricating ability of greases depend on both the base oil and the thickener. Mineral oils are the most widely used lubricant base fluids due to their inherent lubricity and low cost, but recent environmental awareness has forced consideration of the use of biodegradable fluids such as vegetable oils and certain synthetic fluids in grease formulations. This study presents data on the thermo-oxidation behavior and tribology of biodegradable greases formulated with soybean oil and different compositions of metal soap thickener. The composition of thickener has been varied by using fatty acids with different degrees of unsaturation and fatty acids of different chain lengths. The improvement of thermo-oxidation and tribological properties as a result of changing thickener/base oil ratio and the antioxidative effect of some suitable additives have also been evaluated. 相似文献
8.
Sharma BK Adhvaryu A Perez JM Erhan SZ 《Journal of agricultural and food chemistry》2006,54(20):7594-7599
Vegetable oils have significant potential as a base fluid and a substitute for mineral oil for grease formulation. This paper describes the preparation of biobased grease with high oxidative stability and a composition useful for industrial, agriculture/farming equipment, and forestry applications. The process utilizes more oxidatively stable epoxy vegetable oils as the base fluid, metal-soap thickener, and several specialty chemicals identified to address specific applications. Performance characteristics of greases used for industrial and automotive applications are largely dependent on the hardness and the oxidative stability of grease. Grease hardness was determined using standard test methods, and their oxidative stabilities were determined using pressurized differential scanning calorimetry and rotary bomb oxidation tests. Wear data were generated using standard test methods in a four-ball test geometry. Results indicate that grease developed with this method can deliver at par or better performance properties (effective lubrication, wear protection, corrosion resistance, friction reduction, heat removal, etc.) than existing mineral oil-based greases currently used in similar trades. Therefore, developed greases can be a good substitute for mineral oil-based greases in industrial, agriculture, forestry, and marine applications. 相似文献
9.
10.
In recent years there has been considerable interest in using natural plant fibers as reinforcements for plastics. The motivation includes cost, performance enhancement, weight reduction, and environment concerns. High performance flax fiber could potentially substitute for glass or carbon fibers as reinforcements for plastics. This study reports the "green" composites obtained from a mixture of epoxidized soybean oil and epoxy resin, 1,1,1-tris(p-hydroxyphenyl)ethane triglycidyl ether (THPE-GE), reinforced with flax fiber. The compression molding method is used for making the composites. Curing agents triethylenetetramine and diethylenetriamine provide better physical properties of the composites than Jeffamine agents D-230 and EDR-148. Both the flexural modulus and the tensile modulus of the composites increase as the amount of THPE-GE increases. The flexural modulus increased at a fiber content of <10 wt %, but there is a decrease beyond 10 wt %. The tensile modulus increases with fiber content until a maximum at 13.5 wt %, and then it decreases. The flax fiber length affected the mechanical properties of the composites: the longer the fiber length, the better are the mechanical properties observed. 相似文献