Effect of infection timing on fusarium head blight and mycotoxin accumulation in open- and closed-flowering barley

ABSTRACT Barley has two flowering types, chasmogamous (open-flowering) and cleistogamous (closed-flowering). We examined the effect of the timing of Fusarium graminearum infection on Fusarium head blight (FHB) and mycotoxin accumulation in barley cultivars with different flowering types using greenhouse experiments. In the first experiment, 13 cultivars were spray inoculated at two different developmental stages, and the severity of FHB was evaluated. The effect of the timing of infection differed among cultivars. Cleistogamous cultivars were resistant at anthesis but susceptible at 10 days after anthesis, whereas chasmogamous cultivars were already susceptible at anthesis. In the second experiment, five cultivars were inoculated at three different developmental stages and the concentrations of deoxynivalenol (DON) and nivalenol (NIV) in mature grain were analyzed. Cleistogamous cultivars accumulated more mycotoxins (DON and NIV) when inoculated 10 or 20 days after anthesis than when inoculated at anthesis, whereas chasmogamous cultivars accumulated more mycotoxins when inoculated at anthesis. Thus, the most critical time for F. graminearum infection and mycotoxin accumulation in barley differs with cultivar, and likely is associated with the flowering type. Late infection, even without accompanied FHB symptoms, was also significant in terms of the risk of mycotoxin contamination.     

Thermal behaviors and transitions of wood detected by temperature-modulated differential scanning calorimetry

The thermal properties and transitions of solid and ground wood samples conditioned at different humidity conditions were investigated by temperature-modulated differential scanning calorimetry. A time-dependent transition was detected as an endothermic peak in the total and non-reversing heat flows and as a step change in the reversing heat flow during the first heating run of samples with moisture contents above 5?%, but it disappeared in the second heating run. These different thermal behaviors indicate that the effect of heat and moisture on the thermal properties of wood is history dependent. This step change in the reversing heat flow is considered to be a glass transition of moist wood. Other relaxation processes (e.g., enthalpy relaxation) occur simultaneously with this glass transition. The temperature ranges of the transition and the relaxation decreased drastically as the moisture content increased up to 11?%, while they remained almost constant at higher moisture contents. In addition, the transitions of the ground wood occurred at lower temperatures than those of the solid wood at similar moisture contents. Kissinger plots revealed that the apparent activation energy for the glass transition of the solid wood with a moisture content of 11?% was about 600?kJ/mol, whereas that of the ground wood was 220?kJ/mol.     

Seed abortion of ‘Tosa-Buntan’ pummelo pollinated with soft-X-irradiated pollens

Cross-pollination was performed with soft-X-irradiated hyuga-natsu pollens (1000 Gy) for ‘Tosa-Buntan’ pummelo (Citrus grandis (L.) Osbeck). This resulted in the transformation of large and complete seeds into small and empty ones (practically seedless). Although fruit set, fruit retention, total soluble solids content (TSS) and titratable acidity of the juice were not affected, decrement in the fruit size was observed. Two weeks after the pollination, endosperm cell division with free nuclei began in both the non-irradiated and irradiated pollen treatment conditions. Seven weeks after pollination, endosperm division with the cell wall occurred in the non-irradiated pollen treatment conditions; however, the endosperm development ceased in most ovules that underwent the irradiated pollen treatment, and the ovules remained in their free nuclear stage. The delayed degeneration of the ovules, following successful fertilization and commencement of endosperm cell division, allow these seedless fruits to be categorized as pseudo-parthenocarpic.     

Temperature dependences of the dynamic viscoelastic properties of wood and acetylated wood swollen by water or organic liquids

In this study, to summarize the changes of thermal-softening behaviors of wood and acetylated wood due to differences in the kinds of swelling liquids, the following measurements were conducted. Untreated and acetylated wood samples were swollen by various liquids and the temperature dependences of the dynamic viscoelastic properties were measured after the heating and cooling histories were unified among the samples. The results obtained are as follows. Untreated samples swollen by high-polarity liquid had lower peak temperature of tanδ, however acetylated samples had higher peak temperature of tanδ than those of untreated wood. On the other hand, untreated wood samples swollen by low-polarity liquid had higher peak temperature of tanδ, however acetylated samples had lower peak temperature of tanδ than those of untreated wood. The amount of swelling is determined by interaction between wood and liquid due to proton-accepting power and molar volumes of liquid and so on, therefore the peak temperature of tanδ and degree of reduction in dynamic elastic modulus (E´) with increasing temperature were corresponded to the amount of swelling.     

Effects of density and anatomical feature on mechanical properties of various wood species in lateral tension

This study is focused on what factor mainly affects the mechanical properties of each wood species in the lateral direction. At first, the influence of the density which is closely related to mechanical properties in the longitudinal direction was also researched in the lateral direction. Thus, the elastic modulus, strength, and failure strain in the lateral tension were measured using thin cross-sectional samples of softwoods and hardwoods, having wide varieties in the density and anatomical features. The results obtained are as follows. The linear relationship between the density and the elastic modulus which has been verified in the longitudinal direction was not observed in the lateral tension for the samples with the annual ring inclination of 90°, which samples were influenced by ray arranged parallel to the tensile direction. However, samples with the annual ring inclination of 45° showed the high correlation between the density and the elastic modulus due to the shearing deformation of the cell shape. On the other hand, the proportional relationship between the elastic modulus and strength which has been verified in the longitudinal direction was not observed in the lateral tension except for the samples with the annual ring inclination of 90°. From the results obtained, it was revealed that the mechanical properties of wood in the lateral direction were significantly affected not only by the density but also by the structural features such as deformation of cell shapes, arrangement of ray or vessels, and the degree of the transition from the earlywood to the latewood.     

Field trap test for bioassay of synthetic (1<Emphasis Type="Italic">S</Emphasis>,4<Emphasis Type="Italic">R</Emphasis>)-4-isopropyl-1-methyl-2-cyclohexen-1-ol as an aggregation pheromone of <Emphasis Type="Italic">Platypus quercivorus</Emphasis> (Coleoptera: Platipodidae)

An ambrosia beetle, Platypus quercivorus, is a vector of Japanese oak wilt, which causes massive mortality of oak trees in Japan. Previous studies have identified (1S,4R)-4-isopropyl-1-methyl-2-cyclohexen-1-ol ((−)-IMCH) as the major component of the aggregation pheromone of P. quercivorus. We tested the ability of synthetic (−)-IMCH to attract P. quercivorus adults. The synthetic compound attracted 14.4 times as many P. quercivorus, of both sexes, as control traps. Control and (−)-IMCH-baited traps both captured 3.32 times as many males as females, probably because of the nature of Lindgren funnel traps and of male-biased emergence sex ratio early in the season of adult flights. (−)-IMCH was proved to be a major component of the aggregation pheromone of P. quercivorus.     

Identification of a bacterium isolated from galls on carrot and weeds

In 2004, bacterial galls were found on the roots of carrots in Shizuoka Prefecture, Japan. Galls were about 0.1–2 cm in diameter, light brown in color and had rough surfaces. In 2005, similar galls were found on the roots of three weeds: henbit (Lamium amplexicaule L.), Persian speedwell (Veronica persica Poir.) and leaf mustard (Brassica juncea L.). A bacterium that forms white, rough colonies was isolated from the carrot and weeds galls. The bacterial isolates had properties identical with Rhizobacter dauci Goto and Kuwata. Phylogenetic analysis based on 16S rDNA sequences showed that the carrot isolate had the highest homology (similarity of 100%) with that of the type strain of R. dauci. Rep-PCR genomic fingerprinting using BOX A1R primer showed that the carrot and weeds isolates were nearly identical. Pathogenicity of the isolates was confirmed by inoculating the roots of carrots and the weeds. After 2–5 weeks, they formed galls on the roots of the original host species and on other plant species tested. The galls were indistinguishable from those formed naturally, and the inoculated bacterium was reisolated. Thus, the causal bacterium of carrot and weeds gall was identified as R. dauci, and the bacterium was found to have a wider host range than previously known. These weed hosts may serve as inoculum sources for carrot bacterial gall disease.     

Heterochromatin integrity affects chromosome reorganization after centromere dysfunction

The centromere is essential for the inheritance of genetic information on eukaryotic chromosomes. Epigenetic regulation of centromere identity has been implicated in genome stability, karyotype evolution, and speciation. However, little is known regarding the manner in which centromere dysfunction affects the chromosomal architectures. Here we show that in the fission yeast Schizosaccharomyces pombe, the conditional deletion of the centromere produces survivors that carry either a neocentromere-acquired chromosome at the subtelomeric region or an acentric chromosome rescued by intertelomere fusion with either of the remaining chromosomes. The ratio of neocentromere formation to telomere fusion is considerably decreased by the inactivation of genes involved in RNA interference-dependent heterochromatin formation. By affecting the modes of chromosomal reorganization, the genomic distribution of heterochromatin may influence the fate of karyotype evolution.     

Effect of different droplet size on the knockdown efficacy of directly sprayed insecticides

BACKGROUND: Although insecticidal aerosols have been widely accepted for household use, the discharged amount should be maintained at minimum levels because they contain volatile organic compounds. Hence, it would be valuable to develop a technique whereby insecticide droplets adhere efficiently to an insect's body. The present study was undertaken in order to clarify how differences in the mode of adhesion to the insect body influence the knockdown effect. RESULTS: When the discharged volume of droplets with different diameters was the same, the adhesion volume of larger droplets was twice that of smaller droplets, resulting in a higher insect knockdown. In contrast, when the adhesion volume of the two droplet types was the same, a greater number of smaller droplets than larger droplets adhered, and the smaller droplets caused higher insect knockdown. The knockdown effect of both droplet types was lowered when the mesothoracic spiracles of cockroaches were blocked; however, the effect of larger droplets was lowered to a lesser degree. CONCLUSION: The results suggest that, the probability of adhesion to the more susceptible regions of an insect's body, i.e., areas surrounding the mesothoracic spiracles, was improved when a greater number of smaller droplets were adhered, resulting in higher knockdown. Copyright © 2011 Society of Chemical Industry