Multiresidue assay for benzimidazole anthelmintics by liquid chromatography and confirmation by gas chromatography/selected-ion monitoring electron impact mass spectrometry

A multiresidue method utilizing all-disposable labware has been developed for 8 benzimidazole anthelmintics from ovine, bovine, and swine muscle and liver tissues. After an initial extraction with ethyl acetate and subsequent evaporation, a 3-component extraction using hexane, ethanol, and 0.2N HCl was used for final cleanup. Clean extracts were produced for separation and determination by reverse-phase liquid chromatography at 298 nm, using methanol and aqueous buffer as mobile phase. A synthesized internal standard, 2-(n-butylmercapto)benzimidazole, was used for quantitation of all drugs. Results are included along with statistical information verifying the performance of the method. Spiked control tissues and incurred drug tissues were used for an intralaboratory study with a concentration range of 50-1470 ppb. A series of standard curves at 0, 50, 100, and 200 ppb were analyzed. Overall recovery at the 100 ppb level averaged 92% (CV 8%) in liver tissues, across all 3 species and 88% (CV 5%) in muscle tissues across all 3 species. Results were confirmed by gas chromatography/mass spectrometry with acid hydrolysis of the remaining extract in 2N HCl followed by re-extraction of the amine and derivatization to the tert-butyldimethylsilyl derivative. The anthelmintics were identified by gas chromatography/selected ion monitoring electron-impact mass spectrometry. Ion ratio measurements were taken and compared to standard material. CVs averaged 10% or less for all drugs tested.     

Alkyl aryl ketone oxime O-ethers: A novel group of pyrethroids

The alkyl phenyl ketone oxime O-benzyl ethers are a new group of insecticidal compounds. Although they lack the ester linkage, they resemble the pyrethroids in general, and the esters of 2-phenylalkanoic acids, in particular fenvalerate, because they show similar physiological effects on isolated nerve preparations and on whole insects; they also show a similar pattern of change of biological activity in response to structural change. The compounds may exist as two geometric isomers, of which only the (E) series shows significant biological activity; this observation appears to have some bearing on the relationship between conformation and activity in the pyrethroid series as a whole.     

Rapid testing methods for food contaminants and toxicants

Food safety is one of the major concerns in every country regardless of the economic and social development. The frequent occurrence of food scandals in the world has led the Chinese government to implement several strategies to fortify the food supply system to a high food safety standard. This relies heavily on laboratory testing services but conventional methods for detection of food contaminants and toxicants are limited by sophisticated sample preparation procedures,long analysis time,large instruments and professional personnel to meet the increasing demands. In this review,we have incorporated most of the current and potential rapid detection methods for many notorious food contaminants and toxicants including microbial agents,toxic ions,pesticides,veterinary drugs and preservatives,as well as detection of genetically modified food genes and adulterated edible oil. Development of rapid,accurate,easy-to-use and affordable testing methods could urge food handlers and the public to actively screen for food contaminants and toxicants instead of passively relying on monitoring by the government examination facility. This review also provides several recommendations including how to encourage the public to engage in the food safety management system and provide optimal education and financial assistance that may improve the current Chinese food safety control system.     

Mapping QTL controlling soybean seed sucrose and oligosaccharides in a single family of soybean nested association mapping (SoyNAM) population

The meal value of Soybean for monogastric animals is determined partly by sucrose, raffinose and stachyose. Of these, sucrose is desirable, while raffinose and stachyose are indigestible, causing flatulence and abdominal discomfort. The objective of this study was to identify quantitative trait loci (QTL) controlling seed sucrose, raffinose, and stachyose in a set of 140 SoyNAM (Nested Association Mapping) recombinant inbred lines (RILs), developed from the cross between lines IA3023 and LD02‐4485. A total of 3,038 SNP markers from the Illumina SoyNAM BeadChip SNP were used to map the QTLs for sucrose and the RFOs, raffinose, and stachyose. Significant genotypic differences (p < .001) among RILs were observed for sucrose, raffinose and stachyose contents across years. A 3038 Illumina SoyNAM BeadChip SNPs identified three QTLs for sucrose, one on chromosome 1, explaining 10% variance and two on chromosome 3 each explaining 22%. Raffinose QTL was detected on chromosome 6, explaining 6% variance. The mapped QTLs were novel and spanned regions harbouring candidate genes with roles in plant growth including seed development.     

Making Use of Guava Seed (Psidium guajava L): The Effects of Pre-treatments on Its Chemical Composition

The guava processing industry in Malaysia produces by-products in the form of seed core and peel. These by-products can be regarded as underused resources but there are concerns about their composition that prevent their use in the food and feed industries. This study aims to analyze the respective effects of heat treatments (boiling or autoclaving) and germination periods on the nutritional composition and phytochemical content of guava seeds. The guava seeds were found to contain 618, 78, 72, and 5 mg/g dry weight total dietary fiber, fat, protein, and ash, respectively. The tannin and saponin contents, but not the phytic acid content, were below the respective anti-nutritional thresholds. The heat treatments did not affect the total dietary fiber and ash contents but reduced all other chemical components to different extents (15–91 %). Boiling did not reduce the phytic acid content substantially but autoclaving caused a reduction of 91 % to a level below the anti-nutritional threshold. Germination for 14 days caused a significant reduction in nutrient contents in the range of 16–79 %. Germination also reduced the phytic acid content by 90 % in the seed but did not significantly affect the saponin content. Thus, guava seed can be treated thermally or germinated to manipulate its chemical composition to enable its use in the food and feed industries.     

Effect of endosperm starch granule size distribution on milling yield in hard wheat

Increased flour yield in hard wheat is associated with increased endosperm rheology index, calculated from strength and stiffness as measured by the SKCS. A study of the fractured endosperm of hard wheat varieties grouped according to similar rheology index values was performed using environmental scanning electron microscopy (ESEM). Differing microstructures and fracture patterns were observed between each group. Specifically, the group representing high rheology index had a greater concentration of small starch granules in prismatic cells. Samples of diverse wheat germplasm were grown at two sites and subjected to laboratory milling. Starch granule size distribution (SGSD) analysis using a laser diffraction method was undertaken on a subset of samples in triplicate representing a range in flour yield. The results supported an hypothesis for a significant influence of SGSD on flour yield of hard wheat varieties. In addition, a significant part (R²>0.40 (p<0.05) at two sites) of the association appeared to be under genetic control. Results indicate a more even gradation of distributions involving an increase in the sample volume % of small granule (types B and C) and decrease in type A granules. This was associated with increased rheology index values and higher flour yield. The ratio of type A:C starch granules accounted for up to 58% (p<0.05) of the variation in flour yield in the samples studied. Thus, rheological parameters measured using a rapid SKCS screening method can be linked to the genetic regulation of SGSD with implications for the improvement of commercial processing performance of hard wheat.     

Photocatalytic Removal of the Antibiotic Cefotaxime on TiO<Subscript>2</Subscript> and ZnO Suspensions Under Simulated Sunlight Radiation

This study presents the main results about the removal of the antibiotic cefotaxime (CTX) under simulated sunlight radiation using heterogeneous photocatalysis with titanium dioxide (TiO₂) and zinc oxide (ZnO) in aqueous solutions. The effects of pH and catalyst initial load on pollutant removal were assessed considering the response surface methodology and a central composite circumscribed experimental design, which allowed to determine the optimized conditions that lead to a higher substrate elimination. Experimental results indicated that evaluated parameters have a significant effect on antibiotic removal in both TiO₂ and ZnO suspensions. In addition, the role of photogenerated holes, hydroxyl, and superoxide anion radicals on CTX degradation was evaluated to clarify the reaction mechanism. Finally, analysis of the dissolved organic carbon content in solutions and the antibacterial activity of treated samples showed that photocatalytic treatments were able to reduce a considerable portion of the organic matter present in the systems and its antimicrobial activity.     

Transport and adsorption of antibiotics by marine sediments in a dynamic environment

Background, aim, and scope  Bed sediments are the major sink for many contaminants in aquatic environments. With increasing knowledge of and research on the environmental occurrence of antibiotics, there has been growing interest in their behaviour and fate in aquatic environments. However, there is little information about the behaviour of antibiotics in a dynamic water/sediment environment, such as river and coastal marine water. Therefore, the aims of the present study were: (1) to study the transport and distribution of four common antibiotics between water and sediment in both dynamic and quiescent water/sediment systems and (2) to understand the persistence and possible degradation of the four antibiotics in the two different systems. Materials and methods  A lid-driven elongated annular flume, designed to reduce the centrifugal effect, was used to simulate a dynamic water environment. In addition, a quiescent water/sediment experiment was conducted for comparison with the dynamic water system. The seawater and sediment, used in both experiments of flowing and quiescent water/sediment systems, were collected from Victoria Harbour, a dynamic coastal environment in an urban setting. The four antibiotics selected in this study were ofloxacin (OFL), roxithromycin (RTM), erythromycin (ETM), and sulfamethoxazole (SMZ), the most commonly used antibiotics in South China. Results and discussion  Antibiotics in an overlying solution decreased very quickly in the flume system due to the sorption to suspended particles and surface sediment. There were significant differences in the adsorption of the four antibiotics in sediment. OFL showed a high tendency to be adsorbed by sediment with a high K _d value (2980 L/Kg), while the low K _d values of SMZ indicated that there was a large quantity in water. The four antibiotics reached a depth of 20–30 mm in the sediment over a period of 60 days in the flume system. However, the compounds were only found in surface sediment (above 10 mm) in the quiescent system, indicating the influence of the dynamic flume system on the distribution of antibiotics in sediment. OFL showed a moderate persistence in the dynamic flume system, while other three antibiotics had less persistence in sediment. However, all of the four compounds showed moderate persistence in the quiescent system. Recommendations and perspectives  The study showed the rapid diffusive transfer of antibiotics from water to sediment in the dynamic flume system. The four antibiotics exhibited larger differences in their adsorption to sediment in both dynamic and quiescent systems due to their different K _d values. The high sorption of antibiotics to marine sediment may reduce their availability to benthic invertebrates.     

Genetic control of acquired high temperature tolerance in winter wheat

Summary The development of high temperature-tolerant wheat (Triticum aestivum L.) germplasm is necessary to improve plant productivity under high-temperature stress environments. The quantification of high temperature tolerance and the characterization of its genetic control are necessary for germplasm enhancement efforts. This study was conducted to determine the genetic control of acquired high temperature tolerance in common bread wheat cultivars. Reduction of 2,3,5-triphenyltetrazolium chloride (TTC) by heat-stressed seedling leaves was used as a quantitative measure to characterize acquired high temperature tolerance. Eleven-day-old seedlings of 20 F₁ progeny produced through a complete 5×5 (Payne, Siouxland, Sturdy, TAM W-101, and TAM 108) diallel mating design were acclimated at 37° C for 24 hours, followed by a 2-hour incubation at 50° C. Under these test conditions, acquired high temperature tolerance ranged from a high of 75.7% for the genotype TAM W-101 × TAM 108, to a low of 37.3% for the genotype Payne × Siouxland. Partitioning of genotypic variance revealed that only the general combining ability component effect was statistically highly significant, accounting for 67% of the total genotypic variation. These results suggest that enhancing the level of high temperature tolerance in wheat germplasm is feasible utilizing existing levels of genetic variability and exploiting additive genetic effects associated with high temperature tolerance.Contribution of the Texas Tech College of Agric. Sci. Journal no T-4-386. This work was supported by USDA specific agreement No. 58-7MNI-6-114 from the Plant Stress and Water Conservation Laboratory, USDA-ARS, Lubbock, Texas, USA