Effect of Zataria multiflora essential oil on Alternaria alternata in vitro and in an assay on tomato fruits

Journal of Plant Diseases and Protection - The present study aimed to evaluate the effects of Zataria multiflora essential oil at different concentrations (0, 100, 200, 300 and 500 ppm) on the...     

Effects of different growing media on vegetative and reproductive growth of bell pepper

A soilless pot experiment was conducted to investigate the effects of different growing substrates on vegetative and reproductive growth of bell pepper. The growing substrates consisted of: rice hull (100%), perlite (100%), coarse saw dust (100%), rice hull (75%)+zeolite (25%), perlite (75%)+zeolite (25%), saw dust (75%)+zeolite (25%), rice hull (50%)+perlite (50%), saw dust (50%)+perlite (50%), and rice hull (50%)+saw dust (50%) (by volume). Results showed that for all measured vegetative traits the highest and lowest amount was related to the plants grown in the perlite+zeolite and pure rice hull or saw dust, respectively. Results also showed that using perlite+zeolite as the media produced the highest fruit number and yield, while plant grown in the saw dust+zeolite produced the lowest fruit number. According to the results, adding zeolite and perlite to rice hull or saw dust in most cases, significantly increased the pepper yield compared with their pure treatments.     

Salinity tolerance of bermudagrass (Cynodon spp. L. C. Rich) cultivars and shoot Na,K and Cl contents under a high saline environment

Summary

Increasing need for salt-tolerant turfgrasses continues due to population growth in arid and semi-arid regions where potable water is limited, while soil and existing water sources are salty. Bermudagrass (Cynodon spp. L. C. Rich) is widely used in these areas. Therefore, this experiment was conducted to evaluate the salt-tolerance of ten cultivars of bermudagrass under a high saline soil and water environment. Five salinity levels of irrigation water (3.30, 6.93, 10.2, 14.8 and 17.8 dS m^–1) were prepared and 30 pots were surfaced-irrigated at each salinity level for 1 year. Overall top growth, root growth, K content and K:Na ratio were reduced by 75%, 45%, 77% and 94.5%, respectively; while leaf-firing, shoot Cl and shoot Na concentrations were increased by 4%, 498% and 356%, respectively, when the salinity increased from 3.3 dS m^–1 to 17.8 dS m^–1. Regarding the salt-tolerance of cultivars, ‘Tifway’ was superior in top growth, percentage leaf-firing, Na uptake and K:Na ratio, ‘ISF2’ in root growth, and ‘Tifdwarf’ in Cl uptake. Although ‘Tifway’ showed the greatest reduction in root dry weight, it had the lowest level of leaf-firing and lowest reduction in top growth, which could be due to having the lowest Na uptake. Cultivars exhibited marked differences in their response to salinity; however, no mortality was observed, indicating that all cultivars tolerated the salinity levels used in the experiment.     

Enhanced weed‐crop competition effects on growth and seed production of herbicide‐resistant and herbicide‐susceptible annual sowthistle (Sonchus oleraceus)

Enhanced crop competition could aid in the management of annual sowthistle (Sonchus oleraceus L.), a dominant weed of Australian cropping systems. A two‐year pot study was conducted to evaluate the effect of wheat (Triticum aestivum L.) planting densities (0, 82, and 164 wheat plants/m²) on growth and seed production of glyphosate‐resistant (GR) and glyphosate‐susceptible (GS) biotypes of annual sowthistle. Without competition, both biotypes produced a similar number of leaves and biomass, but the GS biotype produced 80% more seeds (46,050 per plant) than the GR biotype. In competition with 164 wheat plants/m², the number of leaves in the GR and GS biotypes was reduced by 62 and 61%, respectively, in comparison with the no‐competition treatment, and similarly, weed biomass was reduced by 78 and 77%, respectively. Compared to no‐competition treatment, the seed production of GR and GS biotypes was reduced by 33 and 69%, respectively, when grown with 82 wheat plants/m², but increasing wheat density from 82 to 164 plants/m² reduced the number of seeds only in the GS biotype (81%). Both biotypes produced greater than 6,000 seeds per plant when grown in competition with 164 plants/m², suggesting that increased crop density should be integrated with other weed management strategies for efficient control of annual sowthistle.     

The selection of superior walnut (<Emphasis Type="Italic">Juglans regia</Emphasis> L.) genotypes as revealed by morphological characterization

Walnut (Juglans regia L.), is one of the main economic fruit species in the world and is rich in nutritious substances. In order to obtain superior walnut genotypes, a set of seedling walnut genotypes were evaluated and their results were recorded. The range of nut length was between 25.57 and 47.77 mm. Also, the ranges of nut weight, kernel weight and kernel percentage varied from 5.35 to 21.31 g, 2.49 to 11.15 g and 37.27 to 66.29%, respectively. Simple correlation analysis showed significant positive and negative correlations between some of the measured traits. Principal component analysis reduced the evaluated traits into the seven main components, which explained 71.71% of the total variance. Bi-plot analysis performed using the first two components, distributed the genotypes into four sides of the plot. Based on the present results, a high variation was observed among the trees, indicating a high potential of the studied germplasm to select the superior genotypes. According to the present research, 57 genotypes with having the highest nut weight and kernel weight, as well as bright color of the kernel, were recognized as superior genotypes and can be used to establish the new orchards or improve cultivars.     

Some physical properties of rough rice (Oryza Sativa L.) grain

Designing the equipment for processing, sorting, sizing and other post-harvesting equipment of agricultural products requires information about their physical properties. In this study, various physical properties of rough rice cultivars were determined at a moisture content of 10% (wet basis). In the case of Sorkheh cultivar, the average thousand grain weight, equivalent diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were 21.64 g, 3.35 mm, 31.76 mm², 20.27 mm³, 39.71%, 0.28, 1269.1 kg/m³, 544.34 kg/m³, and 56.98%, respectively. The corresponding values were 20.52 g, 3.4 mm, 32.58 mm², 21.06 mm³, 39.88%, 0.29, 1193.38 kg/m³, 471.21 kg/m³, and 60.37% for Sazandegi cultivar. For Sorkheh cultivar, the average static coefficient of friction varied from 0.2899 on glass to 0.4349 on plywood, while for Sazandegi cultivar the corresponding value varied from 0.2186 to 0.4279 on the same surfaces. Angle of repose values for Sorkheh and Sazandegi cultivars were 37.66° and 35.83°, respectively. Linear model for describing the mass of rough rice grain was investigated. Mass was estimated with single variable of kernel length with a determination coefficient as 0.862 for Sorkheh cultivar whereas for Sazandegi cultivar was as 0.860.     

Antimicrobial resistance in Clostridium perfringens isolates from broilers in Belgium

The antimicrobial susceptibility of Clostridium perfringens strains isolated from Belgian broilers between May and September 2007 was investigated. All 39 tested isolates were sensitive to enrofloxacin, erythromycin, tylosin, florfenicol and bacitracin. Twenty-six (66%) and 24 (61%) out of the 39 tested isolates showed acquired resistance to tetracycline and lincomycin, respectively. The C. perfringens isolates were also screened by PCR for the presence of the resistance genes tet(K), tet(L), tet(M), tetB(P), tet(O), tet(W), lnu(A) and lnu(B). In 22/26 tetracycline resistant strains and 7/24 lincomycin resistant strains, resistance could be attributed to one or more of these genes. An extended frequency distribution range of MICs was seen for ampicillin. These data are consistent with data derived from studies carried out in 1980 and in 2004, indicating that no changes in antimicrobial resistance patterns have taken place during time in C. perfringens isolates from broilers in Belgium.     

Effect of nanoclay on some applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunei) wood

In this study, the effect of nanoclay on some applied properties of oriented strand board (OSB) made from underutilized low quality paulownia wood was investigated. Organo-modified montmorillonite (MMT) at four levels (0, 1, 3 and 5?%) was added to urea formaldehyde (UF) resin. Some chemical properties of paulownia wood (holocellulose, cellulose, lignin and ash contents, pH value and hot and cold water solubility), mechanical [modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength, screw and nail withdrawal strengths], physical (water absorption and thickness swelling) properties and formaldehyde emission of the strand boards were evaluated. Mechanical properties of all panels complied with the general-purpose OSB minimum property requirements of European Norm. With increasing 5?% nanoclay to UF resin, mechanical and physical properties of the resulting panels improved and formaldehyde emission decreased. However, none of the panels satisfied the thickness swelling and water absorption requirement. The results of X-ray diffraction and transmission electron microscope analysis confirmed the good dispersion of nanoclay in the resulting OSBs. Using paulownia as a fast-growing underutilized species not only can sustain the forests but also can supply raw material to countries facing shortage of wood.