Comparative morphometrical studies on the skull bones of barking deer (Muntiacus muntjak) and sambar deer (Rusa unicolor)

The present study reports data on the skull bone morphometry of barking and sambar deer. The skulls of adult barking deer (n = 6) and sambar deer (n = 6) of either sex (n = 3 males and n = 3 females) were collected from the Aizawl Zoological Park, Aizawl, Mizoram, India, with official permission from the Government of Mizoram. Anatomically, barking and sambar deer's skulls were elongated, pyramid-like, dolichocephalic and consisted of thirty-two cranial and facial bones. The cranial bones were eleven (three single and four paired), comprising of occipital, sphenoid, ethmoid, frontal, interparietal, parietal and temporal. The facial bones were twenty-one (one single and ten were paired), consisting of the maxilla, premaxilla (incisive), palatine, pterygoid, nasal, lacrimal, zygomatic (malar), vomer, turbinates, mandible and hyoid. In the present study, altogether 41 different measurements were taken morphologically and 6 different indices were applied. The obtained morphometrical parameters were significantly (p < .01, p < .05) higher in males than females of both species. Species wise, all obtained parameters were higher in sambar deer than barking deer. The obtained 41 different skull parameters and 6 indices showed statistically significant differences (p < .01 and p < .05) between both sexes of barking and sambar deer; however, practically these differences were meagre. The present morphometrical study on the skull of both species can help the wildlife professionals and zoo veterinarians determine the sex of these animals and differentiate it from other domestic and wild small ruminants for solving veterolegal cases. This study's findings will also motivate and assist other comparative studies with various domestic and wild small ruminants.     

Spatial Distribution of Surface Soil Acidity,Electrical Conductivity,Soil Organic Carbon Content and Exchangeable Potassium,Calcium and Magnesium in Some Cropped Acid Soils of India

Land degradation is a global problem. Best management of degraded land can be done by evaluating the spatial variability of soil properties including chemical properties of degraded land and mapping such variations. Since, a significant portion of arable land in India is chemically degraded due to soil acidity; the present study was conducted to study the spatial variability of soil acidity (pH), electrical conductivity (EC), soil organic carbon (OC) content, exchangeable potassium (K⁺), calcium (Ca²⁺) and magnesium (Mg²⁺) contents in some cropped acid soils of India. A total of four hundred (one hundred from each series) representative surface (0–0.15 m depth) soil samples were collected from arable soils representing four soil series namely Hariharapur, Debatoli, Rajpora and Neeleswaram situated in Orissa, Jharkhand, Himachal Pradesh and Kerala states of India, respectively, and were analyzed. Soil acidity (pH between 3.90 and 6.45) showed a low variability, in contrast to other soil properties, which showed moderate variability. The coefficients of variation varied from 32.4 to 74.3, 31.2 to 50.9, 45.6 to 100, 71.9 to 93.0 and 59.0 to 79.8% for EC (mean between 0.05 and 0.09 dS m⁻¹), OC (mean between 0.29 to 1.86%), exchangeable K⁺ (mean between 39.1 and 77.7 mg kg⁻¹), Ca²⁺ (mean between 148 and 293 mg kg⁻¹) and Mg²⁺ (mean between 111 and 191 mg kg⁻¹), respectively. Soil pH and OC content were positively and significantly correlated with exchangeable K⁺, Ca²⁺ and Mg²⁺ content. Geostatistical analysis revealed that the best fit models were gaussian, exponential and spherical for different soil properties with moderate to strong spatial dependency. Copyright © 2014 John Wiley & Sons, Ltd.     

Biology and life table of Diaeretiella rapae against Brevicoryne brassicae on different cultivars of cauliflower

Phytoparasitica - Diaeretiella rapae (McIntosh) (Hymenoptera: Braconidae) is one of the most promising, effective and a common endoparasitoid of different aphid species including cabbage aphid,...     

Evaluation of Various Drying Methods on Bioactives,Ascorbic Acid and Antioxidant Potentials of Talinum triangulare L., foliage

Plant Foods for Human Nutrition - The aim of this study was to assess the efficiency of different drying methods (room, sun, oven, microwave, cross-flow, infra-red, dehumidifier, and freeze-drying)...     

Integrated effect of population and weed management regimes on weed dynamics,performance, and productivity of basmati rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Weeds caused serious problem on yield reduction of basmati rice worldwide. Losses caused by weeds varied from one country to another, depending on the presence of dominant weeds and the control methods practiced by farmers; therefore, suitable plant population and weed management practices should be adopted. Keeping these in mind, a field experiment was carried out during kharif seasons of 2009 and 2010 at crop Research Centre of SVPUA&T, Meerut, India comprising 4 planting geometries, viz. 20, 30, 40, and 50 hills m^?2 as main plot factor, and 5 weed management practices (Butachlor @ 1.0 kg ha^?1, Butachlor @ 1.0 kg ha^?1 fb (followed by) one hand weeding, Butachlor @ 1.0 kg ha^?1 fb Almix @ 4 g ha^?1, two hand weedings and weedy check) in a split plot design with 3 replications. Experimental results revealed that plant population of 50 hills m^?2 proved superior over that of 20 hills m^?2 in respect of weed density, weed dry weight, number of tillers m^?2, yield attributes, grain, straw, and biological yields. The maximum grain yield (29.00 and 31.00 q ha^?1) and straw yield (51.30 and 52.50 q ha^?1) were recorded in 50 hills m^?2 followed by 40 hills m^?2 during 2009 and 2010, respectively. In respect of nitrogen, phosphorus, and potassium removal, a reverse trend was observed: the highest in 20 hills m^?2 followed by 30, 40, and 50 hills m^?2. As far as the weed management practices are concerned, both chemical and mechanical methods of weed control were found superior over weedy check. The lowest weed density, dry weight, and highest weed control efficiency, maximum length of panicle^?1, number of panicle (m²), and 1000-grain weight and grain yield of 30.40 and 32.60 q ha^?1 were recorded with two hand weedings which was at par with Butachlor @ 1.0 kg ha^?1 fb one hand weeding over rest of the weed management practices.     

Symptoms in slash pine seedlings following inoculation with the cone rust fungus Cronartium strobilinum

Six‐week‐old seedlings of slash pine (Pinus elliottii) were inoculated with sporidia of Cronartium strobilinum, which is the cause of southern cone rust disease, by wounding the apical tips of the seedlings. Pycnial sori developed abundantly within 1 month of inoculation on the epicotyl and primary needles. The progress of the pathogen was confirmed histologically within the cells of the stem and haustoria were observed near the nucleus of the cells. In the needles, pycnial pustules developed and the fungus was abundant in the mesophyll.     

Comparison of Composition,Protein, Pasting,and Phenolic Compounds of Brown Rice and Germinated Brown Rice from Different Cultivars

Physical characteristics, amino acids composition, protein profiling, pasting characteristics, and phenolic compounds of brown rice (BR) and germinated brown rice (GBR) from different paddy cultivars (PB1, PS44, PB1509, PB1121, and PS5) were investigated. L* (lightness) decreased, but a* (redness and greenness) and b* (yellowness and blueness) increased with germination. Protein and ash content increased, whereas fat and amylose contents decreased with germination. GBR showed lower hardness and gumminess than BR. Foam stability and water absorption capacity from GBR flour were higher compared with BR flour. Accumulation of γ‐aminobutyric acid, histidine, arginine, proline, methionine, and acidic amino acids increased significantly with germination, and increase was related to change in accumulation of glutelin and prolamins. The accumulation of prolamins and glutelin acidic and basic subunits decreased with germination. GBR flour showed lower pasting viscosities compared with BR flour. Ferulic acid, p‐coumaric acid, and quercetin were present in both fractions of the bound form. GBR showed improved nutritional quality that varied in different cultivars. PB1121 was observed to be the best for producing GBR owing to greater changes brought in protein content, essential amino acids, catechin, chlorogenic acid, protocatechuic acid, vanillic acid, and foam stability.     

Properties of red maple laminated veneer lumber impregnated with waterborne micronized and two soluble copper formulations

ABSTRACT

Certain important quality parameters of red maple (Acer rubrum) laminated veneer lumber (LVL) impregnated with three waterborne formulations: copper azole (CA-B), micronized copper azole (MicroCA or MCA) and alkaline copper quaternary (ACQ-D) bonded with phenol formaldehyde or cross-linked polyvinyl acetate (XPVAc) adhesives were evaluated. Pre-dipping of veneers before LVL production and two post-manufacturing procedures, viz., vacuum-pressure and post-dipping of LVL, were applied. Maximum copper retention in pre-dip-treated, vacuum-pressure and post-dip-treated LVL was 1.4, 9.7 and 1.7?kg/m³, respectively. Copper retention in MCA-treated LVL was relatively lower than soluble formulations. Various physical, mechanical and bonding properties of treated LVL such as density, water absorption, swelling, flexural properties, hardness, tensile shear strength, delamination and wood failure (%) were studied and compared with untreated LVL. Little to negligible deleterious effect was observed on properties of LVL due to these chemical treatments. Analysis of variance results showed that most of properties of red maple LVL were not significantly different compared with those of untreated LVL. Therefore, vacuum-pressure impregnation process can be used to treat the red maple LVL with novel micronized copper formulations for increasing the service life of such products against biodegradation without affecting techno-mechanical quality parameters.     

Axial variations in anatomical properties and basic density of Eucalypt urograndis hybrid (Eucalyptus grandis 3 E. urophylla) clones

We studied two clones of Eucalypt urograndis hybrid (Eucalyptus grandis 9 E. urophylla), GR283 and GR330, grown in Tumkur district of Karnataka (India), and felled 5–6 years old three trees of each clo...