Heat stress and effect of shade materials on hormonal and behavior response of dairy cattle: a review

In tropical countries, at high temperatures, several physiological rearrangements occur in cows as they attempt to facilitate heat dissipation and/or reduce metabolic heat production. Following exposure to heat, cattle appear to acclimatize within 2–7 weeks. The failure of homeostasis at high temperatures may lead to reduced productivity or even death. The situation is even worse when humidity adds to high temperature. Livestock with elevated body temperature exhibit lower DMI and growth with less efficiency, reducing profitability for dairy farms in hot and humid climates. Shading of feed and water also offers production advantages. Although several elaborate methods for reducing heat stress in cows have been reported, simple shade materials appear to be the most cost-effective methods that are currently applicable to tropical developing countries. Different materials are being used to provide shade during warm weather. The shade material determines the microclimate—it should be light, strong, durable, weatherproof, good looking and a bad conductor of heat, and free from tendency to condense moisture inside. This review discusses various shade materials and their advantages and disadvantages in different situations.     

Integrated effect of population and weed management regimes on weed dynamics,performance, and productivity of basmati rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Weeds caused serious problem on yield reduction of basmati rice worldwide. Losses caused by weeds varied from one country to another, depending on the presence of dominant weeds and the control methods practiced by farmers; therefore, suitable plant population and weed management practices should be adopted. Keeping these in mind, a field experiment was carried out during kharif seasons of 2009 and 2010 at crop Research Centre of SVPUA&T, Meerut, India comprising 4 planting geometries, viz. 20, 30, 40, and 50 hills m^?2 as main plot factor, and 5 weed management practices (Butachlor @ 1.0 kg ha^?1, Butachlor @ 1.0 kg ha^?1 fb (followed by) one hand weeding, Butachlor @ 1.0 kg ha^?1 fb Almix @ 4 g ha^?1, two hand weedings and weedy check) in a split plot design with 3 replications. Experimental results revealed that plant population of 50 hills m^?2 proved superior over that of 20 hills m^?2 in respect of weed density, weed dry weight, number of tillers m^?2, yield attributes, grain, straw, and biological yields. The maximum grain yield (29.00 and 31.00 q ha^?1) and straw yield (51.30 and 52.50 q ha^?1) were recorded in 50 hills m^?2 followed by 40 hills m^?2 during 2009 and 2010, respectively. In respect of nitrogen, phosphorus, and potassium removal, a reverse trend was observed: the highest in 20 hills m^?2 followed by 30, 40, and 50 hills m^?2. As far as the weed management practices are concerned, both chemical and mechanical methods of weed control were found superior over weedy check. The lowest weed density, dry weight, and highest weed control efficiency, maximum length of panicle^?1, number of panicle (m²), and 1000-grain weight and grain yield of 30.40 and 32.60 q ha^?1 were recorded with two hand weedings which was at par with Butachlor @ 1.0 kg ha^?1 fb one hand weeding over rest of the weed management practices.     

Some characteristics of vaginal prolapse in Nepali buffaloes

Prolapse of vagina is one of the important maternal abnormalities during pregnancy in cattle and buffaloes. A field investigation was carried out on 26 Murrah graded buffaloes to study clinical characteristics of vaginal prolapse in buffaloes in Nepal. Fifty-seven percent of the 26 buffaloes with vaginal prolapse were either heifers or in first lactation. Sixty-five percent of the cases were in seventh month of pregnancy or later. About three quarters of the cases occurred between June and October. Twelve cases (63%) of the 19 animals excluding 7 heifers had a history of vaginal prolapse in previous gestations. A half of the buffaloes were showing prolapse of the vagina even when they were in standing position and showing moderate or vigorous straining. After the conventional treatments, twenty-three buffaloes retained the replaced vagina and calved normally. One animal aborted although the vagina was retained. Two buffaloes had severest degree of vaginal prolapse complicated with edema, injury and cyanosis, and they did not respond to the treatment. The two buffaloes had frequently recurrent prolapse and subsequently died. Early detection and prompt treatment may be imperative to control the vaginal prolapse in buffaloes.     

Role of micronutrients on quantitative traits and prospects of its accumulation in linseed (Linum usitatissimum L.)

The adequate growth of plants can be achieved only by a balanced ratio of biologically active nutrients in soil along with its readily availability. Linseed seems to be an advantageous secondary oilseed crop widely used in industrial purposes, which can serve additional purpose of phytoextraction of heavily infested soils with heavy metals. In this study, we have made an effort to find out the optimum dose of heavy metals necessary as micronutrients like copper (Cu), iron (Fe) and zinc (Zn) for the enhancement of linseed yield along with the distribution of heavy metals in different plant parts. Quantitative enhancement in different traits of linseed plant due to Cu, Fe and Zn fertilization especially for capsules per plant after maturity suggested positive association between heavy metal supply and morphological traits, which indirectly enhanced seed yield. There was a positive correlation between Zn supply and seed yield. In the treatments with Cu and Fe fertilization, seed yield was positively correlated to plant height, capsules per plant and seeds per five capsules. According to this study, it is concluded that linseed has the ability to accumulate majorly Fe followed by Cu and Zn.     

Genetic basis of seedling-resistance to leaf rust in bread wheat 'Thatcher'

The bread wheat cultivar ‘Thatcher’ is documented to carry the gene Lr22b for adult‐plant resistance to leaf rust. Seedling‐resistance to leaf rust caused by Puccinia triticina in the bread wheat cultivar ‘Thatcher’, the background parent of the near‐isogenic lines for leaf rust resistance genes in wheat, is rare and no published information could be found on its genetic basis. The F₂ and F₃ analysis of the cross ‘Agra Local’ (susceptible) × ‘Thatcher’ showed that an apparently incompletely dominant gene conditioned seedling‐resistance in ‘Thatcher’ to the three ‘Thatcher’‐avirulent Indian leaf rust pathotypes – 0R8, 0R8‐1 and 0R9. Test of allelism revealed that this gene (temporarily designated LrKr1) was derived from ‘Kanred’, one of the parents of ‘Thatcher’. Absence of any susceptible F₂ segregants in a ‘Thatcher’ × ‘Marquis’ cross confirmed that an additional gene (temporarily designated LrMq1) derived from ‘Marquis’, another parent of ‘Thatcher’, was effective against pathotype 0R9 alone. These two genes as well as a second gene in ‘Kanred’ (temporarily designated LrKr2), which was effective against all the three pathotypes, but has not been inherited by ‘Thatcher’, seem to be novel, undocumented leaf rust resistance genes.     

A leaf rust resistance gene, different from Lr34, associated with leaf tip necrosis in wheat

The gene Lr34 has contributed to durable resistance to leaf rust caused by Puccinia triticina in wheat worldwide. The closely associated leaf tip necrosis is generally used as the gene's marker. Lr34 has been postulated in many Indian bread wheat cultivars including ‘C 306’, based on the associated leaf tip necrosis and a few other field and glasshouse observations. The present study showed monogenic control of adult‐plant resistance in ‘C 306’ to leaf rust pathotype 77‐5 (121R63‐1). The F₂ segregation in the crosses between ‘C 306’ and the two known carriers of Lr34, ‘Line 897’ and ‘Jupateco 73’‘R’ fitted a digenic ratio. The F₃ families derived from the susceptible F₂ segregants were true breeding for susceptibility, proving the absence of Lr34 in ‘C 306’. The cross between ‘Line 897’ and ‘Jupateco 73’‘R’ did not segregate for susceptibility. Resistance in the cross ‘Agra Local’ (susceptible) × ‘C 306’ was associated with leaf tip necrosis, showing that the leaf rust resistance gene in ‘C 306’ was associated with leaf tip necrosis, but was different from Lr34. This gene is being temporarily designated as Lr‘C 306’. Hence, leaf tip necrosis cannot be considered as an exclusive marker for selecting Lr34 in wheat improvement.     

The linkage between the stem rust resistance gene Sr2 and pseudo-black chaff in wheat can be broken

Recessively inherited gene Sr2 has provided the basis of durable resistance to stem rust (caused by Puccinia graminis tritici) in wheat (Triticum aestivum L.) worldwide. The associated earhead and stem melanism or ‘pseudo‐black chaff’ is generally used as a marker for this gene. Sr2 has been postulated in many wheat cultivars of India including ‘Lok 1’, based on associated pseudo‐black chaff in adult plants, and leaf chlorosis in seedlings. However, dominant inheritance of the resistance factor operating in ‘Lok 1’, and a 13 : 3 (resistant : susceptible) F₂ segregation in the ‘Sr2‐line’ (‘Chinese Spring’⁶ × ‘Hope’ 3B) × ‘Lok 1’ cross confirmed that Sr2 was absent in ‘Lok 1’. Susceptible plants with a pseudo‐black chaff phenotype were observed in F₂ populations of ‘Agra Local’ (susceptible) × ‘Lok 1’, and the ‘Sr2‐line’ × ‘Lok 1’ crosses. Most of the F₃ families derived from the susceptible F₂ segregants with pseudo‐black chaff phenotypes were true breeding for the expression of pseudo‐black chaff with susceptibility to stem rust. Thus, linkage of pseudo‐black chaff with Sr2 in wheat can be broken, and hence, caution may be exercised in using pseudo‐black chaff as a marker for selecting Sr2 in breeding programmes.     

Effect of diet on cast production by the megascolecid earthworm Amynthas alexandri in laboratory culture

Feeding and casting activity of Amynthas alexandri fed on corn, wheat leaves, and mixed grasses were monitored in laboratory cultures. Casts were produced on the surface and sides of the containers. Food consumption varied from 36.5 to 69 mg g^–1 live worm day^–1. Cast production ranged from 3.95 to 5.9 mg g^–1 live worm day^–1. The C:N ratio in casts in laboratory cultures (11.17) and in field samples (8.84) was consistently lower than the corresponding ratio in the parent soil (13.19 and 10.54, respectively). This was probably due to mineralization of plant-derived organic material during passage through earthworms with consequent low C:N ratios.