Effects of iron-based amendments on soil structure: a lab experiment using soil micromorphology and image analysis of pores

Purpose

Recent trends in soil green and sustainable remediation require an increased attention on environmental effects. The physical consequences of remediation practices on soil structure are very rarely investigated.

Material and methods

A laboratory experiment was carried out by adding iron grit to a sand (S), a silt loam (L), and a clay (C) soil subjected to several wetting-drying cycles. The physical effects of the treatment on soil pore system were identified and quantified combining physical measurements on repacked samples with image analysis of pores on resin-impregnated soil blocks and micromorphological analysis on thin sections.

Results and discussion

A negligible reduction of total porosity (P) resulted in S, and a slight increase was observed in the L and C soils. However, an important impact on soil structure was identified in pore size range >10 μm for the L and C soils, with the formation of new pores related to the differential shrink-swell behavior between soil matrix and added iron grains. Different plasticity of these soils also played a role in planar pore formation.

Conclusions

Effects of the addition of iron grit on soil pore system are strongly dependent on soil physical properties. The performed experiment showed that iron-based amendments can improve soil structure in low-plastic shrink-swell soil increasing porosity in the range of transmission pores (50–500 μm). This study showed the high potential of soil micromorphology and pore image analysis in order to evaluate the environmental impact of soil remediation practices.     

Prediction of blood orange MT firmness by multivariate modelling of low alterative penetrometric data set: A preliminary study

A study was conducted to evaluate a non-destructive method able to predict Magness–Taylor (MT) penetrometric firmness of blood oranges, potentially applicable for on-line selection. The method consisted of multivariate modelling of non-destructive penetrometric measurements performed on intact oranges with a 11.3 mm diameter probe by digital dynamometric equipment. The tests were carried out on 366 blood oranges (Citrus sinensis (L.) Osbeck cv. Tarocco); 60 were used as a control group to verify the non-destructive nature of the tests. Four test factors were used on the fruit: two different levels of non-destructive deformation (1 and 3 mm), at two different deformation speeds (5 and 30 mm s^?1). In order to obtain the reference parameter (MT firmness), a destructive penetrometric test followed each non-destructive deformation on the same fruit (deformation of 20 mm at 1 mm s^?1). The force–deformation curves of the non-destructive tests were elaborated to calculate different texture parameters (max force, elasticity, work). These parameters with raw curve data (force values for constant deformation steps) were used, after autoscaling pre-processing, as X-block datasets in supervised multivariate modelling (partial least squares) to predict MT firmness values. Among the test factors used, the 30 mm s^?1 speed and 3 mm deformation provided the best overall prediction of MT firmness. This comprised an r value of 0.76 and standard error of prevision (SEP) of 2.99 N for a MT firmness mean value of 35.65 N (8.4%). The time needed to apply the selected deformation may lead to a sorting speed of about 10 fruit per second, representing an acceptable value for commercial application.     

Spray-drying Microencapsulation of an Extract from Tilia tomentosa Moench Flowers: Physicochemical Characterization and in Vitro Intestinal Activity

Plant Foods for Human Nutrition - Silver linden (Tilia tomentosa Moench, TtM) flowers possess several health-promoting properties, especially at the neurological level, such as intestinal...     

: a software to evaluate model performance

The software (Integrated Resources for Evaluating Numerical Estimates) is a data analysis tool designed to provide easy access to statistical techniques for use in model evaluation. Mostly, non-replicated model estimates (E_i) are compared against non-replicated measurements (M_i). The software also allows comparing individual estimates against replicated measurements (or vice versa) and replicated estimates against replicated measurements. The evaluation of model performance is essentially based on the difference E_i−M_i, or on the correlation–regression of E_i vs. M_i (or vice versa). In addition, model evaluation by probability distributions, pattern analysis, or fuzzy-based aggregation statistics is allowed. Graphics are included in most analytical tasks. The results are displayed in separate spreadsheets and can be exported into MS Excel workbooks.     

Studies on the phytotoxicity of acid smuts

Experiments were carried out to investigate, under controlled conditions, the effects of acid smut emitted by oil-fired power plants. The foliar response of 31 selected plant species was ranked and marked differences in sensitivity were observed. Anatomical features of the foliar lesions were described. The toxicity of smuts was largely dependent on their acidity and size. Toxicity was related to temperature but was completely independent of relative humidity in the range from 50 to 90%. No interactive effects were observed between acid smuts and some commercial fungicides, or treatments with asymptomatic concentrations of So₂ in fumigation chambers. Some growth parameters were negatively affected by acid smuts in radish.     

Weather and human impacts on forest fires: 100 years of fire history in two climatic regions of Switzerland

Understanding the factors driving past fire regimes is crucial in the context of global change as a basis for predicting future changes. In this study, we aimed to identify the impact of climate and human activities on fire occurrence in the most fire-prone regions of Switzerland. We considered forest fires, land use and meteorological data over the period 1904-2008 in the neighboring mountain cantons (states) of Valais and Ticino, which are characterized by distinct climatic regimes.The presence/absence of fire ignitions was analyzed using the Nesterov ignition index (as a proxy for fire weather), road density (for ignition sources), livestock density (for biomass removal), and change in forest area (for fire-prone abandoned agricultural areas).We found that fire weather played a key role in fire occurrence in both regions. Road and livestock densities had similar influences in the two cantons. However, while the increase in forest area was well correlated with fire occurrence in Ticino, no such correlation was evident in Valais, probably because land abandonment and forest cover change have been less extensive there. Our findings emphasize the non-linear nature of the relationships between fire occurrence and anthropogenic drivers, as we found thresholds above which road density was no longer correlated with fire occurrence. This implies that the projected future increase and spatial concentration of the human population may not result in a further increase in fire risk in intermediately to densely populated areas in both cantons.The driving factors behind fire activity differ slightly in the two cantons, in particular with increasing forest area enhancing fire occurrence in Ticino but not in Valais. These differences should be taken into account when assessing future fire risk, especially in Valais where the potential for an increase in the fire-prone area is still high. Fires are likely to become more frequent in a warmer climate, but future fire activity may develop differently in the two cantons. This should be taken into account when planning optimized fire prevention measures. This case study should help to better understand fire activity in highly populated regions where fire activity is still moderate but might markedly increase under a projected more fire-prone climate.     

Evidence for ozone formation in human atherosclerotic arteries

Here, we report evidence for the production of ozone in human disease. Signature products unique to cholesterol ozonolysis are present within atherosclerotic tissue at the time of carotid endarterectomy, suggesting that ozone production occurred during lesion development. Furthermore, advanced atherosclerotic plaques generate ozone when the leukocytes within the diseased arteries are activated in vitro. The steroids produced by cholesterol ozonolysis cause effects that are thought to be critical to the pathogenesis of atherosclerosis, including cytotoxicity, lipid-loading in macrophages, and deformation of the apolipoprotein B-100 secondary structure. We propose the trivial designation "atheronals" for this previously unrecognized class of steroids.     

Regulation of cytokine receptors by Golgi N-glycan processing and endocytosis

The Golgi enzyme beta1,6 N-acetylglucosaminyltransferase V (Mgat5) is up-regulated in carcinomas and promotes the substitution of N-glycan with poly N-acetyllactosamine, the preferred ligand for galectin-3 (Gal-3). Here, we report that expression of Mgat5 sensitized mouse cells to multiple cytokines. Gal-3 cross-linked Mgat5-modified N-glycans on epidermal growth factor and transforming growth factor-beta receptors at the cell surface and delayed their removal by constitutive endocytosis. Mgat5 expression in mammary carcinoma was rate limiting for cytokine signaling and consequently for epithelial-mesenchymal transition, cell motility, and tumor metastasis. Mgat5 also promoted cytokine-mediated leukocyte signaling, phagocytosis, and extravasation in vivo. Thus, conditional regulation of N-glycan processing drives synchronous modification of cytokine receptors, which balances their surface retention against loss via endocytosis.