Mercury in the Swedish environment — Recent research on causes,consequences and corrective methods

During the last decade a new pattern of Hg pollution has been discerned, mostly in Scandinavia and North America. Fish from low productive lakes, even in remote areas, have been found to have a high Hg content. This pollution problem cannot be connected to single Hg discharges but is due to more widespread air pollution and long-range transport of pollutants. A large number of waters are affected and the problem is of a regional character. The national limits for Hg in fish are exceeded in a large number of lakes. In Sweden alone, it has been estimated that the total number of lakes exceeding the blacklisting limit of 1 mg Hg kg-1 in 1-kg pike is about 10 000. The content of Hg in fish has markedly increased in a large part of Sweden, exceeding the estimate background level by about a factor of 2 to 6. Only in the northernmost part of the country is the content in fish close to natural values. There is, however, a large variation of Hg content in fish within the same region, which is basically due to natural conditions such as the geological and hydrological properties of the drainage area. Higher concentrations in fish are mostly found in smaller lakes and in waters with a higher content of humic matter. Since only a small percentage of the total flow of Hg through a lake basin is transferred into the biological system, the bioavailability and the accumulation pattern of Hg in the food web is of importance for the Hg concentrations in top predators like pike. Especially, the transfer of Hg to low trophic levels seems to be a very important factor in determining the concentration in the food web. The fluxes of biomass through the fish community appear to be dominated by fluxes in the pelagic food web. The Hg in the lake water is therefore probably more important as a secondary source of Hg in pike than is the sediment via the benthic food chain. Different remedy actions to reduce Hg in fish have been tested. Improvements have been obtained by measures designed to reduce the transport of Hg to the lakes from the catchment area, eg. wetland liming and drainage area liming, to reduce the Hg flow via the pelagic nutrient chains, eg. intensive fishing, and to reduce the biologically available proportion of the total lake dose of Hg, eg. lake liming with different types of lime and additions of selenium. The length of time necessary before the remedy gives result is a central question, due to the long half-time of Hg in pike. In general it has been possible to reduce the Hg content in perch by 20 to 30% two years after treatments like lake liming, wetland liming, drainage area liming and intensive fishing. Selenium treatment is also effective, but before this method can be recommended, dosing problems and questions concerning the effects of selenium on other species must be evaluated. Regardless how essential these kind of remedial measures may be in a short-term perspective, the only satisfactory long-term alternative is to minimize the Hg contamination in air, soil and water. Internationally, the major sources of Hg emissions to the atmosphere are chlor-alkali factories, waste incineration plants, coal and peat combustion units and metal smelter industries. In the combustion processes without flue gas cleaning systems, probably about 20 to 60% of the Hg is emitted in divalent forms. In Sweden, large amounts of Hg were emitted to the atmosphere during the 50s and 60s, mainly from chlor-alkali plants and from metal production. In those years, the discharges from point sources were about 20 to 30 t yr 1. Since the end of the 60s, the emission of Hg has been reduced dramatically due to better emission control legislation, improved technology, and reduction of polluting industrial production. At present, the annual emissions of Hg to air are about 3.5 t from point sources in Sweden. In air, more than 95% of Hg is present as the elemental Hg form, HgO⁰. The remaining non-elemental (oxidized) form is partly associated to particles with a high wash-out ratio, and therefore more easily deposited to soils and surface waters by precipitation. The total Hg concentration in air is normally in the range 1 to 4 ng m-3. In oceanic regions in the southern hemisphere, the concentration is generally about 1 ng m^?3, while the corresponding figure for the northern hemisphere is about 2 ng m-3. In remote continental regions, the concentrations are mainly about 2 to 4 ng m^?3. In precipitation, Hg concentrations are generally found in the range 1 to 100 ng L^?1. In the Nordic countries, yearly mean values in rural areas are about 20 to 40 ng L^?1 in the southern and central parts, and about 10 ng L^?1 in the northern part. Accordingly, wet deposition is about 20 (10 to 35) g km^?2 yr^?1 in southern Scandinavia and 5 (2 to 7) in the northern part. Calculations of Hg deposition based on forest moss mapping techniques give similar values. The general pattern of atmospheric deposition of Hg with decreasing values from the southwest part of the country towards the north, strongly suggests that the deposition over Sweden is dominated by sources in other European countries. This conclusion is supported by analyses of air parcel back trajectories and findings of significant covariations between Hg and other long range transported pollutants in the precipitation. Apart from the long range transport of anthropogenic Hg, the deposition over Sweden may also be affected by an oxidation of elemental Hg in the atmosphere. Atmospheric Hg deposited on podzolic soils, the most common type of forest soil in Sweden, is effectively bound in the humus-rich upper parts of the forest soil. In the Tiveden area in southern Sweden, about 75 to 80% of the yearly deposition is retained in the humus layer, chemically bound to S or Se atoms in the humic structure. The amount of Hg found in the B horizon of the soils is probably only slightly influenced by anthropogenic emissions. In the deeper layers of the soil, hardly any accumulation of Hg takes place. The dominating horizontal flow in the soils takes place in the uppermost soil layers (0 to 20 cm) during periods of high precipitation and high groun water level in the soils. The yearly transport of Hg within the soils has been calculated to be about 5 to 6 g km^?2. The specific transport of total Hg from the soil system to running waters and lakes in Sweden is about 1 to 6 g km^?2 yr¹. The transport of Hg is closely related to the transport of humic matter in the water. The main factors influencing the Hg content and the transport of Hg in run-off waters from soils are therefore the Hg content in soils, the transport of humic matter from the soils and the humus content of the water. Other factors, for example acidification of soils and waters, are of secondary importance. Large peatlands and major lake basins in the catchment area reduce the out-transport of Hg from such areas. About 25 to 75% of the total load of Hg of lakes in southern and central Sweden originates from run-off from the catchment area. In lakes where the total load is high, the transport from run-off is the dominating pathway. The total Hg concentrations in soil solution are usually in the range 1 to 50, in ground water 0.5 to 15 and in run-off and lake water 2 to 12 ng L^?1, respectively. The variation is largely due to differences in the humus content of the waters. In deep ground water with a low content of humic substances, the Hg concentration is usually below 1 ng L^?1. The present amount and concentrations of Hg in the mor layer of forest soils are affected by the total anthropogenic emissions of Hg to the atmosphere, mainly during this century. Especially in the southern part of Sweden and in the central part along the Bothnian coast, the concentrations in the mor layer are markedly high. In southern areas the anthropogenic part of the total Hg content is about 70 to 90%. Here, the increased content in these soils is mainly caused by long-range transport and emissions from other European countries, while high level areas in the central parts are markedly affected by local historical emissions, mainly from the chlor-alkali industry. When comparing the input/output fluxes to watersheds it is evident that the present atmospheric deposition is much higher than the output via run-off waters, on average about 3 to 10 times higher, with the highest ration in the southern parts of Sweden. Obviously, Hg is accumulating in forest soils in Sweden at the present atmospheric deposition rate and, accordingly, the concentrations in forest soils are still increasing despite the fact that the emissions of Hg have drastically been reduced in Sweden during the last decades. The increased content of Hg in forest soils may have an effect on the organisms and the biological processes in the soils. Hg is by far the most toxic metal to microorganisms. In some regions in Sweden, the content of Hg in soils is already today at a level that has been proposed as a critical concentration. To obtain a general decrease in the Hg content in fish and in forest soils, the atmospheric deposition of Hg has to be reduced. The critical atmospheric load of Hg can be defined as the load where the input to the forest soils is less than the output and, consequently, where the Hg content in the top soil layers and the transport of Hg to the surface waters start to decrease. A reduction by about 80% of the present atmospheric wet deposition has to be obtained to reach the critical load for Scandinavia.     

The crystal structure of a mammalian fatty acid synthase

Mammalian fatty acid synthase is a large multienzyme that catalyzes all steps of fatty acid synthesis. We have determined its crystal structure at 3.2 angstrom resolution covering five catalytic domains, whereas the flexibly tethered terminal acyl carrier protein and thioesterase domains remain unresolved. The structure reveals a complex architecture of alternating linkers and enzymatic domains. Substrate shuttling is facilitated by flexible tethering of the acyl carrier protein domain and by the limited contact between the condensing and modifying portions of the multienzyme, which are mainly connected by linkers rather than direct interaction. The structure identifies two additional nonenzymatic domains: (i) a pseudo-ketoreductase and (ii) a peripheral pseudo-methyltransferase that is probably a remnant of an ancestral methyltransferase domain maintained in some related polyketide synthases. The structural comparison of mammalian fatty acid synthase with modular polyketide synthases shows how their segmental construction allows the variation of domain composition to achieve diverse product synthesis.     

Pronuclear Embryo Yield in Canindé and Saanen Goats for DNA Microinjection

The objective of this study was to examine the effect of donor breed on pronuclear‐stage embryo yield to be used for DNA microinjection in a transgenesis goat program. Twelve Canindé and twelve Saanen goats were heat synchronized using a progestagen‐cloprostenol treatment. Forty‐eight hours before the sponge removal, superovulation was induced with a total administration of 4.4 mg/kg bodyweight NIH‐FSH‐P1, given twice daily in decreasing doses over 3 days. In addition, goats received 100 μg of GnRH and they were hand‐mated at 36 and 48 h after progestagen removal. Embryo recovery was performed by oviduct flushing at 72 h after sponge removal. Embryos were microinjected with a DNA construct and noticeable swelling of the nuclei was the criterion for successful microinjection. The total diameter, cytoplasm diameter, zona pellucida thickness and pronuclei diameter were measured for each microinjected embryo. A higher (p < 0.05) percentage of fertilized ova was observed in Canindé (89.9%) than Saanen (36.2%) goats. In addition, Canindé donors produced a higher percentage of pronuclear embryos when compared with Saanen: 72.5% vs 20.6% (p < 0.05), respectively. Successful microinjection was verified in 96.7% and 73.3% of times in Canindé and Saanen embryos, respectively (p < 0.05). Significant differences were observed for all morphometric parameters except for cytoplasm diameter. In conclusion, under our study experimental conditions, Canindé were more efficient than Saanen goats concerning the pronuclear embryo yield and manipulation. The use of Canindé goats in transgenesis programs could be increase the interest in their breeding and could be contribute to saving them from extinction.     

Detection and prevalence of verotoxin-producing Escherichia coli (VTEC) in raw sausage

We investigated 158 samples of shortly ripened raw sausages bought in supermarkets of Dessau within 4 month. In 14 (8.8%) samples Verotoxin-producing E. coli were detected. 13 VT-positive samples were found in the group of easily spread raw sausages. The 14 isolates belonged to 6 different O-serotypes. 4 VT1-, 8 VT2- and 2 VT1/VT2-producers were found. 4 isolates belonged to serogroups which were already described in WHO tables and associated with EHEC infections in human beings. One strain of serogroup O22: H8, isolated from a "Teewurst", possessed the complete virulence gene combination of EHEC (eae, hlyA, stx). The detection procedure, already successfully used for detection and isolation of VTEC from raw milk, soft cheese and raw minced beef showed a sensitivity of approximately 10 CfU/25 g of raw sausages. It has to be considered that VTEC are frequently (8.8%) present in shortly ripened raw sausages. The group of easily spread raw sausages has a higher VTEC-contamination rate than firm raw sausages. Raw sausages, especially easy to spread types, belong to the risk foods for EHEC-infections in human beings.     

Seasonal interaction of serum vitamin D concentration and bone density in alpacas

OBJECTIVE: To evaluate temporal changes in bone mineral density associated with seasonal variation in serum vitamin D, calcium, and phosphorus concentrations in alpacas. ANIMALS: 5 healthy mature neutered male alpacas. PROCEDURE: Metacarpal bone mineral density was measured at 4 times during a year. Each time alpacas were weighed, blood was collected for determination of serum calcium, phosphorus, and vitamin D concentrations, and samples of feed were analyzed for nutrient content. Vitamin D status was determined by use of an assay that measured serum 25-hydroxycalciferol concentration. Effects of changes in serum vitamin D, calcium, and phosphorus concentration and body weight with season on bone mineral density were determined. RESULTS: Bone mineral density, body weight, and serum vitamin D and phosphorus concentrations varied with season. Bone mineral density, serum vitamin D concentration, and body weight also varied among individual alpacas. Serum vitamin D concentration was lower in January than the previous October and increased from May to the following September. The decrease in bone mineral density lagged behind the decrease in serum vitamin D concentration and was lower in May, compared with the previous October. Body weight was lower in May than the previous October or following September. Solar radiation was highest in July and lowest in December. CONCLUSIONS AND CLINICAL RELEVANCE: Seasonal changes in bone mineral density are associated with changes in serum vitamin D concentrations in alpacas. Changes in bone mineral density associated with a decline in serum vitamin D concentration may predispose some alpacas to developing fractures minimal trauma.     

Epidemiological studies of pig diseases: 1. Use of French protocols for risk factor assessment to predict the health status of Australian herds

Objective To determine in Australian pig herds the accuracy of French protocols for risk factor assessment.
Procedure Data on health indicators and risk factors were collected for three syndromes, 'pre-weaning diarrhoea', 'post-weaning diarrhoea' and 'respiratory problems', using the French protocols. The protocols were used on 118 occasions in 32 Western Australian pig herds during 3 years (1988 to 1991).
Results There was a wide variation in pre-weaning performance, for example growth rate was 107 to 273 g/day (< 200 g/day in 33% of herds). Respiratory lesions at weaning were associated with poor pre-weaning performance. Post-weaning (21 days after weaning) growth rate was 114 to 408 g/day (< 250 g/day in 54% of herds). In the grower herds, 91% of herds had pneumonia, and growth rate was 439 to 625 g/day (< 550 g/day in 54% of herds). Pleurisy as well as pneumonia was associated with reduced growth rate. The risk factor most closely associated with respiratory health status was air volume per pig.
Conclusion Risk factors were most accurate at predicting the health status in post-weaning problems. A weaning weight of at least 7.9 kg and weaning age of 30 days optimised weaner performance. Stocking densities and shed designs providing at least 3 m³ air volume and 0.6 m² floor space per pig throughout the growing phase should be considered for an improved respiratory health status. Australian pig sheds often do not provide a satisfactory environment for optimum health. The technique of risk factor assessment as an aid to the maintenance of health in pig herds is applicable in Australia, but further research is necessary to determine the most important Australian risk factors.     

The Post‐Cervical Insemination does not Impair the Reproductive Performance of Primiparous Sows

The study evaluated the reproductive performance of primiparous sows submitted to post‐cervical insemination (PCAI) compared with cervical artificial insemination (CAI). Difficulty with catheter introduction, the occurrence of bleeding or semen backflow during insemination, and volume and sperm cell backflow up to 60 min after insemination were also evaluated. Sows were homogenously distributed, according to body weight loss in lactation, lactation length, weaned piglets, weaning‐to‐oestrus interval and total born in previous farrowing, in two treatments: PCAI (n = 165) with 1.5 × 10⁹ sperm cells in 45 ml (2.4 ± 0.04 doses per sow) and CAI (n = 165) with 3 × 10⁹ sperm cells in 90 ml (2.5 ± 0.04 doses per sow). During PCAI, sows were inseminated in the absence of boars. Transabdominal real‐time ultrasonography was performed at oestrus onset, immediately before the first insemination and at 24 h after last insemination. There was no difference (P > 0.05) between treatments in farrowing rate (91.5% × 89.1%) and litter size (12.5 × 11.9 piglets born, respectively for PCAI and CAI sows). Successful passage of the intrauterine catheter in all the inseminations was possible in 86.8% (165/190) of sows initially allocated to PCAI treatment. Difficulty of introducing the catheter in at least one insemination did not affect the reproductive performance of PCAI sows (P > 0.05). Bleeding during insemination did not affect (P > 0.05) the farrowing rate in both treatments, but litter size was reduced in CAI and PCAI sows (P ≤ 0.06). Percentage of spermatozoa present in backflow within 1 h after insemination was greater in CAI than PCAI sows (P < 0.01). More than 85% of primiparous sows can be successfully post‐cervical inseminated with doses containing 1.5 × 10⁹ sperm cells in the absence of the boar during insemination without impairing the reproductive performance.