金华市农业机械化投入机制初探

农业机械化是农业现代化的基础，是现代化的先决条件，发展农业机械化迫切需要加大投入。为此，分析了金华市现阶段农机化投入的现状及存在的问题；提出了通过建立政府、集体、信贷、农户、外资等“多位一体”的投入机制，加大农机化投入，促进农机化事业健康发展的思路。     

电子时代的医学图书馆馆员和循证医学

 

简要阐述了循证医学的概念及其基本特点，探讨了电子时代循证医学对于医学图书馆员的要

求，同时提出了电子时代医学图书馆员应该具备的知识和技能。

     

沼肥对苹果生物性状的试验初报

笔者对苹果施用沼肥后的生物性状进行了长达4a的对比试验研究，采取对比设计法，在叶、枝、花、果等器官的相关指标取得了极为明显的效果，在果业生产上有极好的推广价值。     

优质高产紫花苜蓿新品种CW 400

CW 400系宁夏固原市农科所2000年从美国西海岸种子公司引入,通过多年多点试验、鉴定,2006年经宁夏回族自治区农作物品种审定委员会审定推广,适宜干旱半干旱地区种植.     

百脉根单株产量主要农艺性状的相关和通径分析

通过对百脉根单株的11个农艺性状的相关分析,结果表明:分枝长度(X2)、分枝节间数(X3)、分枝茎粗(X4)、侧枝数(X6)、侧枝长度(X7)、侧枝节间数(X8)、侧枝茎粗(X9)对单株产量(Y)的作用达到极显著水平,分枝数(X1)、自然高度(X11)与单株产量的相关性达到显著水平,而分枝叶柄长度(X5)、侧枝叶柄长度(X10)则与产量的相关性不显著.通径分析结果表明:各性状对产量的直接效应从大到小依次为:分枝长度(1.121 6)>分枝节间数(0.346 3)>侧枝长度(0.114 6)>分枝数(0.106 4)>分枝茎粗(0.084 6)>侧枝节间数(0.034 2)>侧枝茎粗(0.028 9)>侧枝数(0.021 6)>侧枝叶柄长度(-0.043 6)>分枝叶柄长度(-0.065 4)>自然高度(-0.748 2).     

邓恩桉组培中影响继代增殖条件的研究

探讨抗寒树种邓恩桉组培快繁中影响其继代培养的因素。实验表明,继代培养以改良MS为基本培养基,随继代次数的增加逐渐减少细胞分裂素BA和生长素NAA的浓度。最初几次继代,BA的浓度为0.5 mg/L,NAA的浓度为0.2 mg/L。然后BA的浓度逐渐降低到0.1~0.3 mg/L,NAA的浓度逐渐降至0.05~0.1 mg/L,继代5~6次后,BA的浓度保持在0.1~0.3 mg/L,NAA的浓度保持在0.05~0.1 mg/L。继代周期随季节而不同,夏季为15~25 d,春秋季为20~35 d,冬季为40~50 d,芽的月增殖系数为3~5倍,满足工厂化育苗的要求。组培苗的玻璃化和遗传变异等异常现象很少,节间长度适中,有利于生根。     

踏郎沙地造林技术

文章介绍了内蒙古赤峰市沙地造林树种踏郎的造林技术     

Physiological Analysis of Yield Variation in Mungbean (Vigna radiata [Roxb.] Wilczek)

Two mungbean varieties, Guj-1 and PIMS-1 differing in their productivity potential, were examined to investigate their photosynthetic system at various stages of growth in relation to yield with two different dates of sowing. Vertical leaves were found to be beneficial. On the other hand, excessive leaf area during the later stages of growth may be detrimental to yield. Lower LAD at seedling stage and overall high NAR values may be reflected in higher grain yield. NAR declined as season progressed and this, in turn, may be related with increase in LAI. The grain yield was considerably more at the first date of sowing as compared to second date of sowing, the effect was being more pronounced in var. PIMS-1 . Various environmental factors recorded at two different dates of sowing and at various stages of growth indicated that these factors may have influenced the yield potential at two different dates of sowing.     

Ultrastructure of sarcocysts from water buffalo in India

The ultrastructure of sarcocysts of macro- and microscopic species of Sarcocystis was compared from naturally infected water buffalo from India. Grossly visible sarcocysts had walls consisting of cauliflower-like villar protrusions, typical of S. fusiformis. The sarcocyst wall of the microscopic species of Sarcocystis was 6.4 microns thick and consisted of tightly packed conical villar protrusions that were 9.6 microns long and 3.7 microns wide at the base. At approximately 3 microns above the base, the distal two-thirds of the villar protrusion became conical shaped and was bent laterally at an angle of 45 degrees to the sarcocyst surface. The granular layer beneath the villar protrusions was 0.9 microns thick. In S. levinei the granular layer was 1.9 microns thick, the villar protrusions were narrow and it had a highly undulating primary cyst wall. Whether the microscopic S. levinei-like sarcocysts of Indian and Malaysian water buffalo are distinct species of Sarcocystis will require further investigation.