Present state of imposex in neptune whelk Neptunea arthritica inhabiting shallow waters around Hokkaido, Japan

ABSTRACT:   The state of imposex in Neptunea arthritica from seven sites along the coast of Hokkaido, Japan was examined in 2002 based on the criteria: (i) relative penis size index (RPSI); (ii) imposex frequency; (iii) stage frequency distribution of imposex in adult and immature whelks; and (iv) sex ratio. RPSI differed from site to site, although values from all sites were low (0.186–5.294). In particular, the RPSI values for four sites were very low (<1.0). In sites where immature whelks were also collected, the frequency of imposex was considerably lower in immature (7.7%–55.6%) than in adult whelks (50%–95.2%) except at one site. The imposex stage frequency distribution also differed among sites, and the trend in the adult whelks corresponded with their RPSI value. Female whelks showing severe imposex (Stage 3 and 3+) were restricted to large individuals.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Nondestructive test and prediction of modulus of elasticity of veneer-overlaid particleboard composite

The effects of grain angle, thickness of face veneer, and shelling ratio on dynamic modulus of elasticity (E) of veneer-overlaid particleboard composite (VOP) were examined by using nondestructive test. In this study, the possibility that E of VOP can be predicted by means of some empirical formula was also discussed. This study has shown that grain angle, thickness of face veneer, and shelling ratio have substantial effects on E of VOP. The E at 0° of grain angle of face veneer was the largest, decreasing rapidly with increase in the grain angle. The lowest value of E occurred at 90° of grain angle of face veneer. The relationship between grain angle of face veneer and E of VOP can be expressed in the form of Jenkin’s and Hankinson’s equations. The orthotropic properties of wood and VOP defined as the ratio E ₀/ E ₉₀ were 25.7 for wood and 4.7 for VOP. When the grain direction of face veneer was parallel to the length of the specimens, the E of VOP increased with increasing shelling ratio. VOP increased E from 125 to 179% over that of the particleboard and veneer thickness from 2.1 upto 3.6 mm. However, when the grain direction of face veneer was perpendicular to the length of the specimens, the E of VOP decreased with increasing shelling ratio. VOP decreased E from 23 to 41% over that of the particleboard and veneer thickness from 2.1 upto 3.6 mm. The relationship between E of VOP and face veneer thickness can be expressed in the form of a second-order parabolic equation. Rule of Mixture (ROM) can be used to predict E of VOP from the E of wood element and particleboard element.     

Does future climate change facilitate expansion of evergreen broad-leaved tree species in the human-disturbed landscape of the Korean Peninsula? Implication for monitoring design of the impact assessment

To quantitatively assess future change of evergreen broad-leaved tree species’ distributions in human-disturbed landscapes of the Korean Peninsula under climate change, potential habitats (PHs) were projected for four important evergreen broad-leaved tree species (Quercus acuta, Castanopsis sieboldii, Machilus thunbergii, and Neolitsea sericea) by species distribution models (SDMs). The distribution data (presence/absence) of the target species in Korea and Japan were used as response variables for SDMs, and climatic data were used as explanatory variables. Three general circulation models under A2 emission scenarios were used as future climate scenarios for the years 2070–2099. Potential habitats masked by land-use data (PHLUs) were projected to assess the impact of anthropogenic activities. Highly accurate SDMs were obtained for all the target species. The current PHs were decreased to 21–35 % by the anthropogenic activities. Future PHLUs for all the target species were projected to increase by 2.0–18.5 times of current PHLUs. These results suggest that all the target species are applicable as indicator species for monitoring in the Korean Peninsula, even if anthropogenic effects are incorporated. Variation of the increasing rate was caused by the differences in the response to temperature changes. M. thunbergii responded sensitively to the increase of minimum temperature of coldest month and had a largest increase in PHLUs under future climate. Therefore, M. thunbergii is considered to be most appropriate species for monitoring the changes of horizontal distributions above all focal evergreen broad-leaved tree species.     

EMG telemetry studies on upstream migration of chum salmon in the Toyohira river,Hokkaido, Japan

The movements of 28 adult chum salmon, Oncorhynchus keta (Walbaum) tagged with electromyogram (EMG) transmitters were tracked along the Toyohira river, Hokkaido, Japan, in October of 2007 and 2008 to investigate and evaluate the upstream migratory behavior through the protection bed and fishway of ground sills. The approach time of fish that ascended successfully through the protection bed and fishway was shorter than that of unsuccessful fish. The unsuccessful fish were observed to swim in currents with high water velocity and shallow water depth at swimming speeds that exceeded their critical swimming speed (U _crit) during the approach to these structures. In consequence, unsuccessful fish frequently alternated between burst and maximum sustained speeds without ever ascending the fishway, and eventually became exhausted. It is important that fishway are constructed to enable chum salmon to find a passage way easily, so that they can migrate upstream rapidly without wasting excessive energy.     

Effects of temperature on food consumption, growth and oxygen consumption of freshwater prawn Macrobrachium rosenbergii (de Man 1879) postlarvae

Effects of temperature on food consumption, growth and oxygen consumption were estimated for the freshwater prawn Macrobrachium rosenbergii postlarvae at 23 °C, 28 °C and 33 °C in the laboratory. The results showed that the animal's initial body weight had a close linear relationship with food consumption and growth. Food consumption increased directly with temperature. Consumption rates (C; mg day^?1 ind^?1 ) of the 28 °C and 33 °C groups were much higher than that of the 23 °C group (P < 0.001), and the 33 °C group's consumption rate was higher than that of the 28 °C group (P < 0.05). The relationship of food consumption with temperature and initial body weight (W; mg) could be described as: C = 0.0679W + 0.185t? 3.17. Growth increased significantly with increased temperature. The relationship among specific growth rate, temperature and initial body weight was as follows: SGR = ?0.110W + 0.213t + 0.176. However, temperature showed no effect on growth efficiency. Oxygen consumption increased significantly with temperature (P < 0.01). The weight‐specific oxygen consumption rates (mg O₂ g^?1 h^?1) at 23 °C, 28 °C and 33 °C were 0.83, 1.16 and 1.49 mg O₂ g^?1 h^?1 for 61.92 mg M. rosenbergii.