Heritability and genetic correlation estimates of semen production traits with litter traits and pork production traits in purebred Duroc pigs

We estimated heritabilities of semen production traits and their genetic correlations with litter traits and pork production traits in purebred Duroc pigs. Semen production traits were semen volume, sperm concentration, proportion of morphologically normal sperms, total number of sperm, and total number of morphologically normal sperm. Litter traits at farrowing were total number born, number born alive, number stillborn, total litter weight at birth, mean litter weight at birth, and piglet survival rate at birth. Litter traits at weaning were litter size at weaning, total litter weight at weaning, mean litter weight at weaning, and piglet survival rate from birth to weaning. Pork production traits were average daily gain, backfat thickness, and loin muscle area. We analyzed 45,913 semen collection records of 896 boars, 6,950 farrowing performance records of 1,400 sows, 2,237 weaning performance records of 586 sows, and individual growth performance records of 9,550 animals measured at approximately 5 mo of age. Heritabilities were estimated using a single-trait animal model. Genetic correlations were estimated using a 2-trait animal model. Estimated heritabilities of semen production traits ranged from 0.20 for sperm concentration to 0.29 for semen volume and were equal to or higher than those of litter traits, ranging from 0.06 for number stillborn and piglet survival rate at birth to 0.25 for mean litter weight at birth, but lower than those of pork production traits, ranging from 0.50 for average daily gain to 0.63 for backfat thickness. In many cases, the absolute values of estimated genetic correlations between semen production traits and other traits were smaller than 0.3. These estimated genetic parameters provide useful information for establishing a comprehensive pig breeding scheme.     

Prediction of the buckling stress of intermediate wooden columns using the secant modulus

We made several buckling tests of wooden columns with intermediate slenderness ratios () and examined the empirical formulas. On the basis of the examination, we formulated an equation for predicting the buckling stress () of an intermediate wooden column. Sitka spruce (Picea sitchensis Carr.) and buna (Japanese beech, Fagus crenata BI.) were used for the studies. A compressive load was applied on the specimen supported with pin ends, and the buckling stress was predicted by the tangent modulus theory and two empirical equations: those of Tetmajer and Newlin-Gahagan. The predicted - relations were compared with the test results, and the applicability of these predictions were examined. Based on the comparisons, we formulated an equation that can predict the - relations of materials with various stress-strain characters in the plastic strain range.     

Hardness distribution on wood surface

For better understanding wood hardness, we developed a new hand-operated hardness tester that works with Brinell's method. With this tester we investigated the hardness distribution of wood minutely using a 2mm diameter ball tip. The following results were obtained: (1) On preliminary examination with medium-density fiberboard, we found that the value of Brinell's hardness decreased with the increase in the tip ball's diameter but that it was almost constant with the indenting velocity. (2) By using a small diameter tip, the difference of the hardness became clearer between earlywood and latewood. (3) With radial and tangential sections, we obtained hardness distribution patterns similar to those of wood grain. It seems that the hardness distribution reflects the distribution of density on wood surfaces.     

Deformation analysis of timber-framed panel dome structure I: simulation of a dome model connected by elastic springs

This study develops an analytical method that enables the simulation of the deformation of timber-framed plywood panel dome structures, of which strength is largely governed by the rigidity of joints. A hybrid truss structure model was employed to analyze this structure. In this model, we aimed to incorporate the mechanical properties of bolted and nailed joints, which were employed to build the structures, although the present investigation focused on the deformation characteristics of a dome in which the panel elements were connected mutually by elastic springs. The results of the theoretical analysis are compared with those obtained by experiments. The simulated results were found to be in good agreement with the results of the experiments under similar loading conditions.     

Accuracy of shear properties of wood obtained by simplified Iosipescu shear test

We examined the accuracy of the shear properties of wood by the Iosipescu shear test using specimens whose shape was simplified. Quartersawn boards of sitka spruce (Picea sitchensis Carr.) and shioji (Japanese ash,Fraxinus spaethiana Lingelsh.) were used. Two types of specimen for the Iosipescu shear test were compared: a standard specimen whose notch angle is 90° and a keyhole type specimen, which is more easily prepared than the standard type. The shear modulus, yield shear stress, and failure shear stress of the keyhole-type specimen were compared to those of the standard specimen. Shear stress analysis was conducted using the finite element method (FEM). The results obtained were as follows: (1) The failure pattern obtained by the simplified Iosipescu shear test was similar to that seen with the standard Iosipescu shear test. (2) The shear modulus, yield stress, and failure stress obtained by the simplified Iosipescu shear test coincided with those by the standard Iosipescu shear test. (3) The principal strain angle and principal stress angle of the simplified Iosipescu shear test were about 45°. (4) It is recognized that pure stress is applied to the strain-gauge regions in the simplified Iosipescu shear test, and it is expected that the shear properties are independent of the notch angle.     

Evaluation of genetic trends and determination of the optimal number of cumulative records of parity required in reproductive traits in a Large White pig population

Genetic improvement of the reproductive performance of pigs is important for pig breeding despite their low heritabilities. The objectives of this study were to investigate the effectiveness of selection concerning reproductive traits and to determine the optimal number of parity records required for accurate estimation of breeding values (BVs) in the open population of a commercial pig breeding company. The study used records of 2220 purebred Large White pigs (9845 litters) farrowed between 1998 and 2009 in the two herds of the Pacific Ocean Breeding Co. Ltd. The traits studied included farrowing interval (FI), total number of piglets at birth (TNB), average weaning weight per litter (AWW), and raising rate (RR). A statistical model was applied to the 4‐trait repeatability animal model. The heritabilities of FI, TNB, AWW and RR were low. The genetic trends in TNB (h² = 0.09) showed approximately 1.0 increase in 6 years from 2003 to 2008. The predicted error variances indicated that up to fourth parity records are necessary for accurate genetic evaluation. The present study results indicated that even reproductive traits with low heritability can be improved.     

Three‐dimensional visualization of green fluorescence protein‐labelled Edwardsiella tarda in whole Medaka larvae

The invasive fish pathogen Edwardsiella tarda is common in aquatic environments and causes the environmentally and economically destructive emphysematous putrefactive disease called edwardsiellosis. In order to understand the organism's infection pathway, medaka larvae (Oryzias latipes) were immersion‐infected with E. tarda labelled with green fluorescence protein (GFP) and then visualized in three dimensions under confocal laser microscopy and light‐sheet fluorescence microscopy. Confocal microscopy revealed GFP‐labelled E. tarda in the mouth, head, gill bridges, gill cover, skin, membrane fin, gastrointestinal tract and air bladder, and in the caudal vein, somite veins, caudal artery and caudal capillaries. Light‐sheet microscopy additionally showed GFP‐labelled E. tarda in the pharyngeal cavity, muscle of the pectoral fin and cardiac atrium and ventricle. These findings suggest that during its infection of fish, E. tarda initially adheres to, and invades, the epithelial cells of the skin, gills and gastrointestinal tract (through the pharyngeal cavity); E. tarda then enters the blood vessels to access organs, including the air bladder and heart.     

Thermal-softening properties and cooling set of water-saturated bamboo within proportional limit

Thermal-softening properties and cooling set of water-saturated bamboo were investigated using stressrelaxation measurements in heating and cooling processes, followed by residual deflection measurement. In the heating process, an obvious decrease in relative relaxation modulus due to thermal-softening of lignin was found at around 60°C. On the other hand, no clear change in the relative relaxation modulus was recognized in the cooling process. After the cooling process, about 65% and 75% of residual set was measured when the specimen was loaded on the epidermis and endodermis side, respectively. Also, residual set depended on the maximum temperature reached in the heating process and the unloaded temperature in the cooling process. From these results, it was deduced that the glass transition of lignin from the rubbery to glassy state is important to fix the deformation. Comparing thermal-softening behavior between bamboo and wood, the relative relaxation modulus of wood decreased steeply at higher temperatures than for bamboo. On the other hand, while about 75% of residual set was also found for wood, almost the same as for bamboo, the recovery of deformation with time was larger for wood than for bamboo. Part of this article was presented at the 53rd Annual Meeting of the Japan Zairyou Society, Okayama, May 2004     

Mapping rice-planted areas using time-series synthetic aperture radar data for the Asia-RiCE activity

In Asia, rice is a staple cereal crop and the continent accounts for about 90 % of the global rice production and consumption. Statistics on the areas planted with rice or production of paddy rice are fundamental to agriculture-related decisions or policy-making. Asia-Rice Crop Estimation & Monitoring (Asia-RiCE) aims to develop rice-related information, such as paddy field maps, rice growing conditions, yield, and production, using remote sensing tools and disseminate the same at the local and global scales. In this paper, we propose a methodology for the identification of rice-planted areas by using multi-temporal SAR images; a software named INternational Asian Harvest mOnitoring system for Rice (INAHOR) was developed to manipulate the proposed algorithm. The INAHOR uses the imagery observed both at the time of planting of rice and grown-up stages. In this study, two thresholds needed for the INAHOR were optimized based on the detailed land cover data collected through a field survey. Rice-planted areas across the study area in Japan were identified by the INAHOR using the RADARSAT-2 Wide Fine beam mode data. The classification results of RADARSAT-2 VV and VH polarizations were compared. The data with VH polarization showed a higher total accuracy of 83 % with ?20.5 dB and 3.0 dB for the minimum and range thresholds, respectively. The INAHOR is currently being used with the RADARSAT-2, ALOS, and ALOS-2 SAR data in the Southeast Asian countries to assess the robustness of the thresholds and classification accuracies under the framework of Asia-RiCE.