STRAIN ELASTOGRAPHY USING DOBUTAMINE‐INDUCED CAROTID ARTERY PULSATION IN CANINE THYROID GLAND

Thyroid disease is common in dogs and conventional ultrasonography is a standard diagnostic test for diagnosis and treatment planning. Strain elastography can provide additional information about tissue stiffness noninvasively after applying external or internal compression. However, natural carotid artery pulsations in the canine thyroid gland are too weak to maintain sufficient internal compression force. The objective of the present study was to describe the feasibility of strain elastography for evaluating the canine thyroid gland and the repeatability of dobutamine‐induced carotid artery pulsation as an internal compression method. In seven healthy Beagle dogs, strain on each thyroid lobe was induced by external compression using the ultrasound probe and internal compression using carotid artery pulsation after dobutamine infusion. The thyroid appeared homogeneously green and the subcutaneous fat superficial to the thyroid lobe appeared blue. Strain values and strain ratios did not differ among dogs or between the left and right lobes. Interobserver repeatability was excellent for both compression methods. Intraobserver repeatability of the strain ratio measured using the carotid artery pulsation method (intraclass coefficient correlation = 0.933) was higher than that measured using the external compression method (0.760). Mean strain values of thyroid lobes for the external compression method (142.93 ± 6.67) differed from the internal method (147.31 ± 8.24; P < 0.05). Strain ratios between the two methods did not differ. Strain elastography was feasible for estimating thyroid stiffness in dogs. Carotid artery pulsation induced by dobutamine infusion can be used for canine thyroid strain elastography with excellent repeatability.     

Modification of SWAT auto-calibration for accurate flow estimation at all flow regimes

To secure accuracy in the Soil and Water Assessment Tool (SWAT) simulation for various hydrology and water quality studies, calibration and validation should be performed. When calibrating and validating the SWAT model with measured data, the Nash–Sutcliffe efficiency (NSE) is widely used, and is also used as a goal function of auto-calibration in the current SWAT model (SWAT ver. 2009). However, the NSE value has been known to be influenced by high values within a given dataset, at the cost of the accuracy in estimated lower flow values. Furthermore, the NSE is unable to consider direct runoff and baseflow separately. In this study, the existing SWAT auto-calibration was modified with direct runoff separation and flow clustering calibration, and current and modified SWAT auto-calibration were applied to the Soyanggang-dam watershed in South Korea. As a result, the NSE values for total streamflow, high flow, and low flow groups in direct runoff, and baseflow estimated through modified SWAT auto-calibration were 0.84, 0.34, 0.09, and 0.90, respectively. The NSE values of current SWAT auto-calibration were 0.83, 0.47, ?0.14, and 0.90, respectively. As shown in this study, the modified SWAT auto-calibration shows better calibration results than current SWAT auto-calibration. With these capabilities, the SWAT-estimated flow matched the measured flow data well for the entire flow regime. The modified SWAT auto-calibration module developed in this study will provide a very efficient tool for the accurate simulation of hydrology, sediment transport, and water quality with no additional input datasets.     

Classification of the hot air heat treatment degree of larch wood using a multivariate analysis of near-infrared spectroscopy

In this study, hot air heat treatments of larch (Larix kaempferi) wood specimens were conducted at various temperatures (160–220 °C) and times (1–12 h) to classify the degree of hot air heat treatment using near-infrared (NIR) spectroscopy. NIR reflectance spectra were acquired from specimen cross-sections and were then preprocessed using the standard normal variate. Hierarchical clustering analysis (HCA) using the complete linkage and squared Euclidean distance was conducted to classify the three degrees of heat treatment. A principal component score plot of the NIR spectra was well grouped by the HCA grouping result, and the first component reflected the cluster analysis grouping well. A partial least squares discriminant analysis was performed to develop the discriminant regression model of the three heat treatment degrees. The R² and root mean square error of validation were 0.959 and 0.191, respectively. NIR is considered to be a good candidate to routinely measure the degree of hot air treatment for larch wood.     

Effect of heat treatment temperature and time on sound absorption coefficient of <Emphasis Type="Italic">Larix kaempferi</Emphasis> wood

Heat treatment improves the dimensional stability and hydrophobicity of wood, and heat-treated wood is currently attracting attention as a new interior material. However, there are few evaluations where the acoustic properties of heat-treated wood are reported when such wood is used as an interior material. In this study, Larix kaempferi wood, typically used as a building material, was heat-treated at 200, 220, and 240 °C for 9, 12, 15, and 18 h. The sound absorption coefficients of the treated wood samples were measured at 250, 500, 1000, 2000, and 4000 Hz in a reverberation room. The sound absorption coefficient increased with the treatment temperature and the treatment time. The results of this study showed that the high-frequency band range sound absorption coefficient of wood can be increased dramatically by heat treatment.     

Dynamic computed tomography evaluation of the nasopharynx in normal Beagle dogs

Pharyngeal collapsibility has been used as diagnostic criteria in dogs, whereas the normal range and quantitative method have not been studied. Dynamic and static computed tomography (CT) was performed in 23 normal Beagle dogs to quantify the nasopharyngeal collapsibility at different locations. Using dynamic CT, maximum and minimum nasopharyngeal cross-sectional areas (CSAs) were measured at the level of the cranial end of the soft palate, pterygoid hamulus, foramen lacerum, bony labyrinth, and caudal end of the soft palate. The ratio of all maximum and minimum CSA to nasopharyngeal CSA at the level of the caudal hard palate (rCSAmax and rCSAmin) and the nasopharyngeal collapsibility were calculated. The differences of rCSAmax, rCSAmin, and nasopharyngeal collapsibility were analyzed at various locations. The nasopharyngeal collapsibility at the level of foramen lacerum, bony labyrinth, and caudal end of soft palate were higher than the others. At the level of the caudal end of the soft palate, rCSAmin was lower than that of the foramen lacerum and bony labyrinth, whereas rCSAmax at foramen lacerum was higher than that of the caudal end of the soft palate. These results indicated that the nasopharynx at the level of foramen lacerum and caudal end of the soft palate were considered notable locations for evaluating collapsibility. Dynamic CT could show the nasopharyngeal dynamic profile and will be an adequate modality for evaluating nasopharynx. Our results will be helpful for further comparative studies in dogs with and without nasopharyngeal collapse.     

Real-time intraocular pressure measurement during phacoemulsification in dogs ex vivo

This study was performed to evaluate changes in intraocular pressure (IOP) during standard coaxial phacoemulsification using 4 different bottle heights (BHs) and 2 different incision sizes. Coaxial phacoemulsification was performed with a venturi-based machine in 8 enucleated canine eyes through 3.0 and 3.2 mm clear corneal incisions (CCIs). A pressure transducer inserted in the peripheral cornea monitored the IOP in real-time. The surgery was subdivided into 4 stages: sculpt-segment removal, irrigation/aspiration, capsular polishing and viscoelastic removal. The mean IOP and the difference between the maximum and minimum IOPs were calculated at each stage and compared. The ultrasound time and volume of irrigation fluid used were recorded. The mean IOP increased with an elevation in the BH. The mean IOP in the irrigation/aspiration stage was significantly higher than that in the sculpt-segment removal stage at the same BH. The difference between the maximum and minimum IOP at each stage was greater in the 3.2 mm than the 3.0 mm CCIs, although the mean IOP was lower with the 3.2 mm than the 3.0 mm CCIs. The ultrasound time and irrigation fluid volume were greater with the 3.2 mm than the 3.0 mm CCIs. Therefore, fluidic parameters during each stage could be reassessed and adjusted to reduce complications arising from an elevated IOP. Phacoemulsification with 3.0 mm CCIs at a lower BH might lead to less stress on the eye from IOP fluctuations, ultrasound energy and irrigation fluid.     

Changes of major chemical components in larch wood through combined treatment of drying and heat treatment using superheated steam

The effects of the combined treatment of drying and heat treatment using superheated steam (SHS) were studied relative to the changes of the major chemical components in larch wood. The green lumber was dried and heat-treated in SHS conditions of 250 °C and 0.5 MPa for 18 h, and the relative percentage contents of sugars, lignin, and extractives were investigated and compared with the relative percentage contents in the lumber heat-treated in hot air conditions of 250 °C and atmospheric pressure for 18 h. After both heat treatment methods, the relative percentage contents of xylan, mannan, galactan, and arabinan were greatly decreased, whereas that of the Klason lignin was increased, additionally that of glucan and extractives remained almost unchanged. Lignin may bind with furan compounds decomposed from hemicellulose following heat treatment, thus contributing to the increase in the apparent relative percentage contents of the Klason lignin. In addition, the condensate collected in the condenser after combined drying and heat treatment using SHS was investigated qualitatively and quantitatively by high-performance liquid chromatography (HPLC). A large amount of furfural and acetic acid decomposed from hemicellulose was detected and some sugar components composed of cellulose and hemicellulose were detected in the liquid condensate.     

Frequency detection of pyrethroid resistance allele in Anopheles sinensis populations by real-time PCR amplification of specific allele (rtPASA)

To investigate the level of pyrethroid resistance in Anopheles sinensis Wiedemann 1828 (Diptera: Culicidae), a major malaria vector in Korea, we cloned and sequenced the IIS4-6 transmembrane segments of the sodium channel gene that encompass the most widely known kdr mutation sites. Sequence analysis revealed the presence of the major Leu-Phe mutation and a minor Leu-Cys mutation at the same position in permethrin-resistant field populations of An. sinensis. To establish a routine method for monitoring resistance, we developed a simple and accurate real-time PCR amplification of specific allele (rtPASA) protocol for the estimation of resistance allele frequencies on a population basis. The kdr allele frequency of a field population predicted by the rtPASA method (60.8%) agreed well with that determined by individual genotyping (61.7%), demonstrating the reliability and accuracy of rtPASA in predicting resistance allele frequency. Using the rtPASA method, the kdr allele frequencies in several field populations of An. sinensis were determined to range from 25.0 to 96.6%, suggestive of widespread pyrethroid resistance in Korea.     

Determining the age of cats by pulp cavity/tooth width ratio using dental radiography

The purpose of this study was to evaluate the effect of age on the ratio of pulp cavity/tooth width (P/T ratio) in healthy cats. The dental radiographs of 32 cats (16 males and 16 females) were generated with a digital dental X-ray unit with the animals under general anesthesia. Standardized measurement of the canine teeth was performed by drawing a line on the radiograph perpendicular to the cementoenamel junction (CEJ) of the tooth. There was an inversely proportional correlation between chronological age and the P/T ratio. Moreover, a strong Pearson squared correlation (γ² = 0.92) was identified by the curved regression model. No significant differences in the P/T ratio based on gender or breed were found. These results suggest that determination of age by P/T ratio could be clinically useful for estimating the chronological age of cats.