Are Phenological Observations Sufficient to Estimate the Quality of Seed Crops from a <Emphasis Type="Italic">Eucalyptus grandis</Emphasis> Open-pollinated Seed Orchard? Consequences for Seed Collections

Reproductive phenology was observed over three years in a Eucalyptus grandis seed orchard in Madagascar to determine the impact of geographic differences of parental selections on the expected genetic composition of seed crops. Pollen flow (observed pollen cloud) was deduced from a paternity assignment based on sampling from one year’s seed production. The two approaches were used to verify whether knowledge of phenology is sufficient to predict the genetic quality of the seeds collected. Despite the high flowering level, with a constant cycle over three years, the results demonstrated wide reproductive phenological differences associated with the parents’ origin, suggesting putative pollination disequilibrium. From both observed and expected pollen clouds, the results showed preferential mating among different provenances, which has consequences for seed crop composition. Phenological observations, which can be made inexpensively, can be used to promote methods of effective seed orchard management in order to improve the genetic quality of seeds.     

Relationships between biochemical attributes (non-structural carbohydrates and phenolics) and natural durability against fungi in dry teak wood (Tectona grandis L. f.)

• Introduction   

Non-structural carbohydrates and phenolic compounds are implicated in the natural durability of wood. In order to find the chemical traits of natural durability in teak wood, the radial distribution of phenolics compounds and non-structural carbohydrates were studied in trees ranked by contrasting natural durability class against Antrodia sp.     

Molecular tracing of <Emphasis Type="Italic">Bradyrhizobium </Emphasis>strains helps to correctly interpret <Emphasis Type="Italic">Acacia mangium </Emphasis>response to inoculation in a reforestation experiment in Madagascar

A field inoculation experiment using two Bradyrhizobium sp. strains was set up in Madagascar to test the growth response of Acacia mangium and to follow up the survival of inoculant strains using molecular tools. Three months after inoculation, one of the inoculant strains, AUST13c, exhibited a marked growth-promoting effect with a shoot height about 40% higher than that of the uninoculated control plants or TEL8-inoculated plants. The positive effect on tree growth initially observed with AUST13c was no more significant 6 months after transfer to the field and disappeared completely at 13 and 19 months. Analyses of nodule bacterial rRNA by PCR/RFLP displayed an early contamination of the different inoculation treatments by AUST13c 3 months after inoculation, spreading to almost all nodules of the trial 6 months later. This work clearly demonstrated that the progressive reduction of the positive effect of AUST13c inoculation on tree growth after field transplanting was not due to a progressive disappearance of this introduced strain but, on the contrary, was related to the widening spreading of AUST13c in all the plots. This was attributed to a higher competitiveness and effectiveness of AUST13c over the local strains and TEL8.     

Towards informed metrics for examining the role of human‐induced animal responses in tag studies on wild animals

Two prime issues can detrimentally affect animals that have been equipped with tags: (i) the effect of the capture and restraint process; and (ii) the effect of the tag itself. This work examines some of the issues surrounding quantification of tag effects on wild animals for both restrained and free‐living animals. A new method to quantify stress effects based on monitoring ventilation rates in relation to activity is suggested for restrained animals which may help improve the practice of handling animals. It is also suggested that various metrics, many derived from accelerometers, can be examined in tagged wild animals to examine the change in behaviors over time with a view to having a better understanding of welfare issues, assuring the quality of recorded data and informing best practice.     

Genetic variability of growth and wood chemical properties in a clonal population of Eucalyptus urophylla × Eucalyptus grandis in the Congo

Thirty-four Eucalyptus urophylla × Eucalyptus grandis hybrids were evaluated with a view to selecting for improved growth and wood-quality traits for plantations in the Congo. Height, circumference at breast height and volume were measured at 12, 27, 37, 49 and 60 months. Lignin content, the syringyl/guaiacyl ratio and total extractives content were predicted by near-infrared spectroscopy using wood powder samples collected from trees at breast height. While wood chemical properties were stable and under strong genetic control, growth traits were not. The genetic correlation between lignin content and growth was weak and negative, whereas the environmental correlation was also weak but positive. The genetic improvement of E. urophylla × E. grandis clones, based on growth features, leads to a limited decrease in lignin content and syringyl content and to a limited increase in extractives content.     

Bromide residues in potatoes fumigated with methyl bromide

Summary Free methyl bromide and total bromide residues were determined in potatoes fumigated with methyl bromide. In potatoes fumigated at 180 mg×h/l with methyl bromide at 10 or 18°C after import into the United Kingdom, no free methyl bromide was detectable 24 h after fumigation and total bromide did not exceed 32 ppm.     

Rapid prediction of shrinkage and fibre saturation point on teak (Tectona grandis) wood based on near-infrared spectroscopy

? Dimensional stability, along with the natural durability and colour of the wood, is one of the most important characteristics of teak used as timber. However, it is very time-consuming to take measurements of this kind. For the purposes of selection for the production of improved varieties, the number of samples to be measured rapidly exceeds the capacity of a traditional laboratory.

? Near-infrared spectroscopy, based on a set of reference data, is a tool enabling many of the chemical properties of wood to be predicted and the number of laboratory measurements to be reduced exponentially. The issue here is a question of checking the effectiveness of NIRS tool to build models and predict the shrinkage and fibre saturation point of teak wood from Togo.

? The results show the possible use of NIRS to measure the dimensional stability of teak wood and that it is appropriate to choose the type of wood and type of surface to be measured by NIRS. The best prediction models for radial and tangential shrinkage and fibre saturation point give R ² values of 0.72, 0.83 and 0.87 respectively with ratios of performance deviation of 1.8, 2.4 and 2.8.

? Consequently, after verification on other sets of teak samples, which may or may not be included in the prediction model, NIRS can be used to predict shrinkage and fibre saturation point values accurately for a large number of samples, making it possible to include these characteristics in the selection criteria for classifying wood and high throughput phenotyping.

     

Diversity of penicillarian millets (Pennisetum glaucum and P. purpureum) as for the compatibility between their gynoecia and pollens from some other Poaceae

Summary The compatibility between gynoecia of different penicillarian millets (Pennisetum glaucum and P. purpureum) and pollens from some other Poaceae was evaluated in order to determine whether different penicillarian pistils showed the same pistil-pollen interactions with a same non-penicillarian pollen and to determine whether compatibility was dependent on the genetic divergence or the degree of sympatric evolution of the mating partners. Ten pearl millet lines (P. glaucum subsp. glaucum), six wild pearl millet accessions (P. glaucum subsp. monodii) and one P. purpureum accession were pollinated with five other Pennisetum species: P. pedicellatum, P. polystachyon, P. schweinfurthii, P. squamulatum, P. ramosum, and with three species from other genera: Cenchrus ciliaris, Panicum maximum and Zea mays. Each male species was represented by a unique accession. Pollen grain germination on the stigmata and pollen tube growth in the gynoecia were monitored by means of fluorescence microscopy after aniline blue staining. Significant compatibility differences were observed between a given pollen and gynoecia from different P. glaucum accessions. But there was no evidence of compatibility differences between the three female taxonomic groups. The eight pollen parents can be classified into three groups according to their mean degree of compatibility with the different penicillarian gynoecia. P. ramosum, P. schweinfurthii and P. squamulatum showed a high compatibility: more than 50% of penicillarian gynoecia had pollen tubes at the micropyle, six hours after pollination. Zea mays, Cenchrus ciliaris and Panicum maximum showed a low compatibility: pollen tubes were arrested in the style. P. pedicellatum and P. polystachyon showed nil compatibility: few pollen grains germinated on the stigmata and very rare tubes reached the entry of the style, where they stopped. It must be noted that such a strong gametic barrier has been observed only with pollinator species sympatric to pearl millet.     

The larger,the better? Effects of delayed diameter-limit cutting on old-growth attributes and saproxylic beetle diversity in temperate oak forests

Intensive management implies harvesting large, old trees, which reduces the old-growth attributes. This negatively affects biodiversity, especially saproxylic beetles. In managed temperate oak forests, rotation extension induced by increasing the diameter threshold of final harvest by about 10 cm compared to conventional practices (i.e. DBH around 70 cm) might mitigate this negative effect. Here, we used a gradient of the proportion of overmature trees (DBH?≥?80 cm) among mature trees (DBH?≥?70 cm) across plots of high oak French forests to test the potential effect of increasing diameter threshold on (1) structural features and (2) species composition and diversity of saproxylic beetles communities. We assessed deadwood and microhabitats availability (i.e. volume/density and diversity) and canopy openness in 81 1-ha plots across eleven French forests. Results highlighted that a larger proportion of overmature trees, for a given density of mature trees, had limited effects on structural features: only cavities density showed a significant positive response, with no cascading effect on cavicolous beetles. Moreover, the proportion of overmature trees had no significant effect on the composition of saproxylic beetles communities (and ecological variables altogether explained only 17% of the composition inertia). By contrast, mature tree density enhanced microhabitat density and indirectly increased the abundance of rare species. Thus, shifting DBH from 70 to 80 cm in high oak forest could have no or limited effect on saproxylic beetles conservation. Improved strategies might rather stem from combining (1) longer rotation extension and (2) less intensive management practices in extended rotation stands.