Metallic glasses

Amorphous metallic alloys, relative newcomers to the world of glasses, have properties that are unusual for solid metals. The metallic glasses, which exist in a very wide variety of compositions, combine fundamental interest with practical applications. They also serve as precursors for exciting new nanocrystalline materials. Their magnetic (soft and hard) and mechanical properties are of particular interest.     

Comparison of three methods of temperature measurement in hypothermic, euthermic, and hyperthermic dogs

OBJECTIVE: To assess the reliability and accuracy of a predictive rectal thermometer, an infrared auricular thermometer designed for veterinary use, and a subcutaneous temperature-sensing microchip for measurement of core body temperature over various temperature conditions in dogs. DESIGN: Prospective study. ANIMALS: 8 purpose-bred dogs. PROCEDURES: A minimum of 7 days prior to study commencement, a subcutaneous temperature-sensing microchip was implanted in 1 of 3 locations (interscapular, lateral aspect of shoulder, or sacral region) in each dog. For comparison with temperatures measured via rectal thermometer, infrared auricular thermometer, and microchip, core body temperature was measured via a thermistor-tipped pulmonary artery (TTPA) catheter. Hypothermia was induced during anesthesia at the time of TTPA catheter placement; on 3 occasions after placement of the catheter, hyperthermia was induced via administration of a low dose of endotoxin. Near-simultaneous duplicate temperature measurements were recorded from the TTPA catheter, the rectal thermometer, auricular thermometer, and subcutaneous microchips during hypothermia, euthermia, and hyperthermia. Reliability (variability) of temperature measurement for each device and agreement between each device measurement and core body temperature were assessed. RESULTS: Variability between duplicate near-simultaneous temperature measurements was greatest for the auricular thermometer and least for the TTPA catheter. Measurements obtained by use of the rectal thermometer were in closest agreement with core body temperature; for all other devices, temperature readings typically underestimated core body temperature. CONCLUSIONS AND CLINICAL RELEVANCE: Among the 3 methods of temperature measurement, rectal thermometry provided the most accurate estimation of core body temperature in dogs.     

Production protocol development for greenhouse cut Linaria, Lupinus, and Papaver flowers

Linaria maroccana Hook. f. Ann., ‘Lace Violet’, Lupinus hartwegii ssp. cruikshankii Lindl. ‘Sunrise’ and Papaver nudicaule L. ‘Meadow Pastels’ seeds were directly sown into 105 cell plug trays and received either ambient light or supplemental high intensity discharge (HID) lighting. For each species, a 2 × 3 × 3 factorial was used with two light intensities during propagation, three transplant stages, and three night temperatures. Seedlings were transplanted at the appearance of 2–3, 5–6, or 8–9 true leaves. Transplanted Linaria and Papaver seedlings were placed at 5/11, 10/16, or 15/21 ± 1 °C night/day temperatures and Lupinus seedlings were placed at 15/24, 18/25, or 20/26 ± 2 °C night/day temperatures. For this study, the optimum production temperature for Linaria was 10/16 °C as the cut stems produced at 15/21 °C were unmarketable and production time was excessively long at 5/11 °C. At 10/16 °C, Linaria seedlings should be transplanted at the 2–3 leaf stage to maximize stem number, stem length and profitability. For Lupinus the optimum temperature was 15/24 °C due to long stems and high profitability per plant. Lupinus seedlings should be transplanted at the 2–3 leaf stage when grown at 15/24 °C to obtain the longest and thickest stems; however, $/m² week was higher for plants transplanted at the 8–9 leaf stage due to less time in finishing production space. For Papaver, the 15/21 °C temperature was optimal as that temperature produced the longest stems in the shortest duration, resulting in the highest $/m² week. At 15/21 °C Papaver plants should be transplanted at the 2–3 leaf stage. Supplemental HID lighting had no effect on any of the species.     

Carbon distribution and losses: erosion and deposition effects

Because of concerns about the eventual impact of atmospheric CO₂ accumulations, there is growing interest in reducing net CO₂ emissions from soil and increasing C storage in soil. This review presents a framework to assess soil erosion and deposition processes on the distribution and loss of C in soils. The physical processes of erosion and deposition affect soil C distribution in two main ways and should be considered when evaluating the impact of agriculture on C storage. First, these processes redistribute considerable amounts of soil C, within a toposequence or a field, or to a distant site. Accurate estimates of soil redistribution in the landscape or field are needed to quantify the relative magnitude of soil lost by erosion and accumulated by deposition. Secondly, erosion and deposition drastically alter the biological process of C mineralization in soil landscapes. Whereas erosion and deposition only redistribute soil and organic C, mineralization results in a net loss of C from the soil system to the atmosphere. Little is known about the magnitude of organic C losses by mineralization and those due to erosion, but the limited data available suggest that mineralization predominates in the first years after the initial cultivation of the soil, and that erosion becomes a major factor in later years. Soils in depositional sites usually contain a larger proportion of the total organic C in labile fractions of soil C because this material can be easily transported. If the accumulation of soil in depositional areas is extensive, the net result of the burial (and subsequent reduction in decomposition) of this active soil organic matter would be increased C storage. Soil erosion is the most widespread form of soil degradation. At regional or global levels its greatest impact on C storage may be in affecting soil productivity. Erosion usually results in decreased primary productivity, which in turn adversely affects C storage in soil because of the reduced quantity of organic C returned to the soil as plant residues. Thus the use of management practices that prevent or reduce soil erosion may be the best strategy to maintain, or possibly increase, the worlds soil C storage.     

Phylogenetic analysis of bacterial communities in the shrimp and sea cucumber aquaculture environment in northern China by culturing and PCR–DGGE

In this study, we investigated the bacterial communities in the shrimp and sea cucumber culture environment, including shrimp ponds (SP), sea cucumber ponds (SCP), mixed-culture ponds (MCP) and the effluent channel (EC) in Qingdao, China. Bacteria cultivation showed that the counts of heterotrophic, nitrate-reducing and sulfate-reducing bacteria in the sediment of SP were higher than that in the sediment of SCP and MCP, varying between 8.7 × 10⁴ and 1.86 × 10⁶, 2.1 × 10⁴ and 1.1 × 10⁵, and 9.3 × 10¹ and 1.1 × 10⁴ CFU g^?1, respectively. In contrast, the counts of ammonium-oxidizing and nitrifying bacteria in the sediment of SP was lower than that in the sediment of SCP and MCP. Denaturing gradient gel electrophoresis (DGGE) of 16S rDNA gene and dendrogram analyses showed that bacterial diversity in the mixed-culture environment was higher than that in the monocultures. The similarity of bacterial community between EC and SCP or MCP was higher than that between EC and SP. These results indicated that sea cucumber culture played a significant role in influencing the environmental bacterial communities that were composed mainly of Flavobacteriaceae (64.3%), Bacteriodetes (21%) and delta proteobacteria (14.7%), including the genera of Croceimarina, Lutibacter, Psychroserpens and so on. The results explained the benefit of sea cucumber culture in shrimp ponds at the level of microbial ecology.     

Oral eosinophilic granulomas in tigers (Panthera tigris)--a collection of 16 cases.

Oral eosinophilic granulomas were diagnosed in 16 tigers (Panthera tigris). All lesions were located on the hard or soft palate and typically consisted of flat or slightly raised circular ulcers. Histologic features of these lesions were essentially identical to those seen in oral eosinophilic granulomas of domestic cats and dogs. No clinical signs were noted in eight cases, though various degrees of inappetence, excessive salivation, and dysphagia were noted in the other eight tigers. Six cases were not treated. Treatment for the remaining 10 cases centered on corticosteroids and additional treatments included surgical removal, cryotherapy, antibiotics, and chlorpheniramine. Treatment with corticosteroids did appear to be effective in some cases, though lesions would worsen after cessation of therapy and no cases were cured. In addition, three cases developed complications possibly related to this corticosteroid therapy. The etiology of these lesions remains unknown, though an underlying allergic condition is likely.     

Top 20 environmental weeds for classical biological control in Europe: a review of opportunities, regulations and other barriers to adoption

Classical biological control remains the only tool available for permanent ecological and economic management of invasive alien species that flourish through absence of their co‐evolved natural enemies. As such, this approach is recognized as a key tool for alien species management by the Convention on Biological Diversity (CBD), the European and Mediterranean Plant Protection Organization (EPPO) and the European Strategy on Invasive Alien Species (ESIAS). Successful classical biological control programmes abound around the world, despite disproportionate attention being given to occasional and predictable non‐target impacts. Despite more than 130 case histories in Europe against insect pests, no exotic classical biological control agent has been released in the EU against an alien invasive weed. This dearth has occurred in the face of increasing numbers of exotic invasive plants being imported and taking over National Parks, forests and amenity areas in this region, as well as a global increase in the use of classical biological control around the world. This paper reviews potential European weed targets for classical biological control from ecological and socioeconomic perspectives using the criteria of historical biological control success, taxonomic isolation from European native flora, likely availability of biological control agents, invasiveness outside Europe and value to primary industry and horticulture (potential for conflicts of interest). We also review why classical biological control of European exotic plants remains untested, considering problems of funding and public perception. Finally, we consider the regulatory framework that surrounds such biological control activities within constituent countries of the EU to suggest how this approach may be adopted in the future for managing invasive exotic weeds in Europe.     

Prediction of oriented strand board properties from mat formation and compression operating conditions. Part 2: MOE prediction and process optimization

A model to predict the bending modulus of elasticity (MOE) of oriented strand board (OSB) panels produced by batch processing is presented. The approach developed herein is unique in its comprehensiveness since the MOE is determined from information on the panel structure, temperature and moisture profiles and vertical density profiles obtained from the mat formation and compression models presented in Part 1. Comparison of predicted MOE values with those measured from 24 commercially produced panels shows good agreement considering some of the uncertainties involved. Simulations show that the MOE can be increased by any of the following changes: reduced fines content, increased panel density, better flake alignment in each of the three layers within a panel, increased flake length and a larger difference between the density of the face and core layers. The model was also used in a genetic algorithm to carry out an optimization study of batch OSB manufacturing. This analysis showed that by combining the appropriate reduction in the amount of flakes used, increase in fines content, improvement in flake alignment within each of the face and core layers and shortening of the batch time, a significant theoretical profit increase from the base case scenario can be obtained.