Nutrient limitations to bacterial and fungal growth during cellulose decomposition in tropical forest soils

Nutrients constrain the soil carbon cycle in tropical forests, but we lack knowledge on how these constraints vary within the soil microbial community. Here, we used in situ fertilization in a montane tropical forest and in two lowland tropical forests on contrasting soil types to test the principal hypothesis that there are different nutrient constraints to different groups of microorganisms during the decomposition of cellulose. We also tested the hypotheses that decomposers shift from nitrogen to phosphorus constraints from montane to lowland forests, respectively, and are further constrained by potassium and sodium deficiency in the western Amazon. Cellulose and nutrients (nitrogen, phosphorus, potassium, sodium, and combined) were added to soils in situ, and microbial growth on cellulose (phospholipid fatty acids and ergosterol) and respiration were measured. Microbial growth on cellulose after single nutrient additions was highest following nitrogen addition for fungi, suggesting nitrogen as the primary limiting nutrient for cellulose decomposition. This was observed at all sites, with no clear shift in nutrient constraints to decomposition between lowland and montane sites. We also observed positive respiration and fungal growth responses to sodium and potassium addition at one of the lowland sites. However, when phosphorus was added, and especially when added in combination with other nutrients, bacterial growth was highest, suggesting that bacteria out-compete fungi for nitrogen where phosphorus is abundant. In summary, nitrogen constrains fungal growth and cellulose decomposition in both lowland and montane tropical forest soils, but additional nutrients may also be of critical importance in determining the balance between fungal and bacterial decomposition of cellulose.     

Meta-analysis of fungicide efficacy on soybean target spot and cost–benefit assessment

Target spot of soybean has spread in Brazil, the southeastern United States and Argentina in the last decade. A collaborative network of field Uniform Fungicide Trials (UFT) in Brazil was created in 2011 to study the target spot control efficacy of fungicides, including azoxystrobin + benzovindiflupyr (AZ_BF), carbendazim (CZM), fluxapyroxad + pyraclostrobin (FLUX_PYRA), epoxiconazole + FLUX_PYRA (EPO_FLUX_PYRA), mancozeb (MZB) and prothioconazole + trifloxystrobin (PROT_TRIF). Network meta-analysis was used to conduct a quantitative synthesis of UFT data collected from 2012 to 2016 and to evaluate the effects of disease pressure (DP, low ≤ 35% target spot severity in the nontreated control < high) and year of experiment on the overall mean efficacy and yield response to each of the tested fungicides. Based on mean percentage control of target spot severity, the tested fungicides fall into three efficacy groups (EG): high EG, FLUX_PYRA (76.2% control relative to the nontreated control) and EPO_FLUX_PYRA (75.7% control); intermediate EG, PROT_TRIF (66.5% control) and low EG, MZB (49.6% control), AZ_BF (46.7% control) and CZM (32.4% control). DP had a significant effect on yield response. At DP_Low, the highest response was due to PROT_TRIF (+342 kg ha⁻¹, +12.8%) and EPO_FLUX_PYRA (+295.5 kg ha⁻¹, +11.2%), whereas at DP_High, EPO_FLUX_PYRA and FLUX_PYRA outperformed the other treatments, with yield responses of 503 kg ha⁻¹ (+20.2%) and 469 kg ha⁻¹ (+19.1%), respectively. The probability of a positive return on fungicide investment ranged from 0.26 to 0.56 at DP_Low and from 0.34 to 0.66 at DP_High.     

A new standard area diagram set for assessment of severity of soybean rust improves accuracy of estimates and optimizes resource use

Soybean rust (SBR), caused by Phakopsora pachyrhizi, is the most important yield-damaging fungal disease of soybean due to severe reduction in healthy leaf area and acceleration of leaf fall. In experimental research, SBR severity is estimated visually aided/trained by a standard area diagram (SAD) developed and validated during the mid-2000s (Old SAD). In this study, we propose a new SAD set for SBR with six true-colour diagrams following linear increments (c. 15% increments) amended with four additional diagrams at low (<10%) severities, totalling 10 diagrams (0.2%, 1%, 3%, 5%, 10%, 25%, 40%, 55%, 70%, and 84%). For evaluation, 37 raters were split into two groups. Each assessed severity in a 50-image sample (0.25%–84%), first unaided and then using either the Old SAD or the New SAD. Accuracy, precision, and reliability of estimates improved significantly relative to unaided estimates only when aided by the New SAD (accuracy >0.95). Low precision (<0.78) and a trend of underestimation with an increase in severity were the main issues with the Old SAD, which did not differ from unaided estimates. Simulation to evaluate the impact of the errors by different methods on hypothesis tests, showed that the new SAD was more powerful for detecting the smallest difference in mean control (e.g., 70% vs. 65% disease reduction) than the Old SAD; the latter required a 2-fold increase in sample size to achieve the same power. There is a need to improve some SADs, taking advantage of new knowledge and technology to increase accuracy of the estimates, and to optimize both resource use efficiency and management decisions.     

Effects of temperature,relative humidity and age of conidia on the incidence of spotting on gerbera flowers caused by Botrytis cinerea

In recent years, spotting of ray florets of gerbera flowers has become an important problem. This type of small necrotic lesions may occur before, but especially shortly after harvesting the flowers.Botrytis cinerea was easily isolated from such lesions. Inoculation withB. cinerea only gave typical necrotic lesions, when dry conidia were dusted on the flowers with a short period of high rh after inoculation. At 18–25 °C a high rh for at least 5 hours was necessary. Rotting of ray florets and receptacles byB. cinerea occurred when inoculated flowers were kept wet for a few days. Spots consist of one to several necrotic, usually epidermal cells. A single conidium could give rise to a necrotic lesion after germination. Germination of conidia and lesion formation occurred between 4 and 25 °C; at 30 °C, germination and lesion formation did not occur. Between 18 and 25 °C, many lesions became visible within 1 day after inoculation; at 4 °C it took 2 to 3 days before lesions could be seen. If kept dry, conidia ofB. cinerea remained ungerminated on ray florets of gerbera flowers and could be removed from the ray florets. Within 1 day at high rh, germination occurred and lesions were produced. Conidia ofB. cinerea, stored dry, were able to survive much longer than the lifetime of a gerbera flower. Even after storage at room temperature for up to 14 months, some conidia were able to germinate in vitro and on ray florets and induce the formation of lesions. Addition of gerbera pollen diffusate stimulated germination and lesion formation.     

The economics of traditional rattan cultivation

In this paper the author: (a) discusses the uniqueness of rattan among non-timber forest products, (b) examines the financial and the economic profitability of smallholder rattan cultivation, and (c) outlines a strategy for expanding smallholder rattan plantations among non-traditional producers.     

Yield map generation of perennial crops for fresh consumption

Yield mapping technologies can help to increase the quantity and quality of agricultural production. Current systems only focus on the quantification of the harvest, but the quality has equal or greater importance in some perennial crops and impacts directly on the financial profitability. Therefore, a system was developed to quantify and relate the quality obtained in the classification line with the plants of the orchard and for decision-making. The system is comprised of hardware, which obtains the location of the harvester bag during harvesting and unloading at the unloading site, and software that processes the collected data. The cloud of real-time data contributed from the different collectors (bins) allows the construction of yield maps, considering the multi-stage harvesting system. Further, the system enables the creation of a detailed map of the plants and fruits harvested. As the harvest focuses on quality, it takes place in stages, depending on the ripening of the fruits. In addition to the yield maps, the system allows identification of the efficiency of each worker undertaking the harvest by the number of performed discharges and by the time spent. The system was developed in partnership with the Federal Technological University of Paraná and Embrapa Uva & Vinho and was tested in apple orchards in southern Brazil. Although the system was evaluated with only data from apple cultivation, monitoring the quality and quantifying other orchard fruits can positively impact the fruit sector.

     

Effect of aflatoxin B1 on resistance induced by Bordetella bronchiseptica vaccine in rabbits

The effects of aflatoxin B1 on the development of the immune response to oil-adjuvanted Bordetella bronchiseptica vaccine and on acquired resistance to bacterial challenge were studied in rabbits. The doses of aflatoxin used were insufficient to produce clinical intoxication. Rabbits were randomly assigned to three groups, each having six animals: control (T), vaccinated (V), and vaccinated plus aflatoxin (VA) at 0.05 mg/kg daily per os. Groups V and VA were vaccinated twice, and the three groups were subsequently challenged with virulent B. bronchiseptica. The average weight gain at weekly intervals was significantly reduced in group VA, and no statistically significant differences were found in the titers of agglutinating antibodies between groups V and VA. There were significant differences between groups V and VA in the extent and severity of the pneumonic process, group VA being most affected. Results indicated that agglutinating antibody titers were not related to the level of protection in the latter group. Other mechanisms, such as alveolar macrophage activity and cell-mediated immunity, were implicated in the impairment of the acquired resistance in rabbits subclinically intoxicated with aflatoxin.     

Sclerotinia resistance in sunflower: I. Genotypic variations of hybrids in three environments of Argentina

Sclerotinia sclerotiorum infections on sunflower capitula produce white rot, one of the most dangerous diseases sunflower bears in all humid areas. Therefore, disease quantification on developed genetic materials is a very important action in sunflower breeding. Given the horizontal type of resistance these evaluations should be made in different environments. Several hybrids obtained after crossing seven female × seven male sunflower inbred lines in a factorial mating design were evaluated for resistance to white rot in two locations in the southeast of the province of Buenos Aires, Argentina. Disease incidence and the symptom appearance index indicated significant genotypic effects and genotype × environment (G × E) interactions. Genotypic effects were a greater source of variance than the G × E interaction effects. The G × E interactions only represented changes in magnitude. These results were used to identify the best genotypes for both resistance factors. Four hybrids showed low disease incidence values under both artificial and natural infections, of which only two had high values of the symptom appearance index at both locations. These hybrids are considered to have adequate resistance attributes for the ascosporic penetration and the mycelium extension in the capitulum tissue and could therefore be sown in the province of Buenos Aires without increasing risks of S. sclerotiorum attacks.     

Effect of red grapes co-winemaking in polyphenols and color of wines

The red grapes co-winemaking effect on phenolic fraction and wine color has been studied for the first time, where Monastrell was comacerated and cofermentated with Cabernet Sauvignon and Merlot. Changes in the relative abundance of anthocyanins were observed as well as hyperchromic shifts at 530 and 620 nm; these effects remain constant after aging. Co-winemaking also favored copigmentation, giving way to more stable anthocyanins and facilitating their polymerization. With regard to color evolution, the mixture of Monastrell with Merlot grapes was more appropriate than with Cabernet Sauvignon for aging wines in oak barrels. The extent of copigmentation was more important in young wines than in aged wines. This is mainly due to the self-anthocyanin monomer reactions in the case of young wines, whereas in aged wines copigmentation is mainly due to the reaction between the anthocyanins and other polyphenolic cofactors. Discriminant analysis showed the possibility of differentiating wines according to the aging time and the type of wine, with color parameters (color intensity, OD 620 nm, and OD 520 nm) being the most important discrimination variables in the first case and petunidin-3-glucoside and peonidin-3-glucoside contents in the second case.