Evaluating the nutritive profile of three insect meals and their effects to replace soya bean in broiler diet

This study was conducted to evaluate the comparative effect of maggot meal, silkworm meal and mealworm as dietary protein source on the production performance and some aspects of meat quality in broilers. In this regard, maggot meal was reared on chicken offal and poultry waste. Silkworm meal was obtained from silk industry, while mealworm was developed through beetles rearing. A total of 120‐day‐old broiler chicks were randomly divided into four groups where soya bean meal (M0) was replaced with maggot meal (M1), silkworm meal (M2) and mealworm (M3) respectively. Each group was further divided into three replicates. The study was carried out for a period of 5 weeks. Diets containing mealworm significantly reduced overall feed consumption and resulted into higher weight gain (p < .05). Lowest feed conversion ratio (FCR) was recorded for birds fed with mealworm diet (p < .05). Tenderness and juiciness of meat were higher (p < .05) in M3 compared to the control and other treatments. Mortality did not vary between the control and the treated groups. Therefore, it is concluded that insect meal is rich in essential nutrients and could be successfully used in broiler ration without compromising acceptability. In the light of this study, mealworm is the best choice in broiler ration, in comparison with maggot and silkworm.     

Carrier rate of the c.235G>C mutation in the bovine isoleucyl-tRNA synthetase (IARS) gene of Japanese Black cows at Kagoshima prefecture, Japan,and analysis of the metabolic profiling and reproductive performance of heterozygous cows

Bovine isoleucyl-tRNA synthetase (IARS) disorder, a major cause of weak calf syndrome, is caused by a homozygous missense (c.235G>C) mutation in the bovine IARS gene of Japanese Black (JB) cattle, which was identified in 2013. However, the extent to which the carrier rate has changed at Kagoshima prefecture, Japan, and whether the carrier status is associated with any clinical or reproductive problems, have yet to be ascertained. In this study, using a real-time polymerase chain reaction-based genotyping assay, we determined the carrier rate in a regional JB cow population at Kagoshima prefecture. Comparative analyses were performed on the metabolic profile test (MPT) results and reproductive performance data obtained for heterozygous carrier and homozygous wild-type cows. In 2009 and 2018, DNA samples were collected from 130 and 462 clinically healthy JB cows, respectively, in Kagoshima prefecture. MPT results and reproductive performance data were evaluated for 62 cows, comprising four heterozygous carriers and 58 wild-type cows. Genotyping revealed that the carrier rate was 6.9% in 2009 and 1.5% in 2018, the difference of which was statistically significant (P<0.005). There were no statistically significant differences between the carrier and wild-type cows with respect to either MPT results or reproductive performance, indicating that the carrier cows have necessary IARS activity to maintain minimal health and reproductive potential.     

New technique of sex preselection for increasing female ratio in boar sperm model

In this study, we tried to optimize the porcine semen extender conditions to maximize the differences between live X chromosome-bearing (X) spermatozoa and to Y chromosome-bearing (Y) spermatozoa without a decline in the fertility rate at different pH conditions during storage. We observed the viability of X and Y boar spermatozoa in acidic (pH 6.2), original (pH 7.2), and alkaline condition (pH 8.2) for 5 days to investigate the effect of storage conditions on the X to Y spermatozoa ratio. The functional parameters of spermatozoa were also examined to evaluate sperm quality. Sperm motility was preserved at pH 7.2 and pH 6.2 for 3 days, while sperm motility at pH 8.2 decreased significantly after 2 days. Non-capacitated spermatozoa increased while capacitated spermatozoa decreased during storage. Sperm viability decreased significantly duration-dependent under all pH conditions, but there was no significant difference during storage at pH 6.2 and 7.2. The X: Y ratio of live spermatozoa in acidic condition was maximized (1.2:1) without affecting the sperm function and fertility-related protein expression after 2 days compared to original conditions. Moreover, insemination of sows using acidic extender increased the number of female pups on days 1 and 2 of preservation. These results indicate that the production of female offspring may increase when acidic BTS is used for 2 days without affecting the success rate of AI. Above all, this method is simple and economical compared to other methods.     

Role of active aluminum in the formation of water-stable macroaggregates

Soil structure is determined by the arrangement of particles in soil and the particles of sand, silt, and clay bind together into aggregates of various sizes by organic and inorganic materials. Structural stability which is the ability of the aggregates and pores to remain intact when subjected to stress, markedly affects crop production and soil erosion (Tisdall 1996). Since water, either directly as rainfall or as surface runoff is the main agent of aggregate breakdown, in the analyzes of stable soil aggregation, the term water-stable aggregation is generally used (Lynch and Bragg 1985). Water-stable aggregates have been divided into micro aggregates < 0.25 mm dia.) and macro aggregates (> 0.25 mm dia.) (Edwards and Bremner 1967; Tisdall and Oades 1982). Microaggregates show a relatively high stability against physical disruption (Edwards and Bremner 1967). On the other hand, macro aggregates are sensitive to soil management (Tisdall and Oades 1982).

There are many reports on the relationships between the aggregate stability and the soil physicochemical properties. For example, significant correlations were found between the aggregate stability and the amounts of organic C (Tisdall and Oades 1982), total N, and carbohydrates or the CEC (Chaney and Swift 1984). However, most of these studies were conducted in non-volcanic ash soils. Volcanic ash soils are widely distributed in Japan and are very important soils for crop production. The objective of this study was, therefore, to obtain more information on the relationship between the degree of macro aggregation and the soil physicochemical properties in non-volcanic and volcanic ash soils.     

Effects of Dietary Vitamin C on Blood Chemistry and Nonspecific Immune Response of Juvenile Red Sea Bream,Pagrus major

A trial was conducted to determine the effect of ascorbyl‐2‐monophosphate Na/Ca (AMP‐Na/Ca) on blood chemistry and nonspecific immune response of red sea bream juveniles. Test diets with three levels of AsA (free, 107, and 325 mg/kg diet) were fed to juvenile red sea bream (36.0 ± 1.3 g) two times a day for 3 wk. There were no significant differences in hematocrit, glucose, and blood urea nitrogen. Total cholesterol and triglyceride in plasma of fish fed AsA‐free diet was significantly (P < 0.05) higher than that of fish fed two other diets. There were no significant differences in serum albumin, total bilirubin, and total serum protein. Glutamyl oxaloacetic transaminase in serum of fish fed diets containing 107 and 325 mg of AsA were significantly (P < 0.05) lower than that of fish fed AsA‐free diet. Serum lysozyme activity (LA) of fish fed diets containing 107 and 325 mg of AsA were significantly (P < 0.05) higher than that of fish fed AsA‐free diet. There was no significant difference in mucus LA. The results mentioned above demonstrated that AMP‐Na/Ca is a bioavailable AsA source for red sea bream juveniles. Supplement of more than 107 mg AsA/kg in diets improved blood chemistry and nonspecific immune function of red sea bream juveniles.     

Food Production and Water Conservation in a Recirculating Aquaponic System in Saudi Arabia at Different Ratios of Fish Feed to Plants

An indoor aquaponic system (i.e., the integration of fish culture with hydroponic plant production in a recirculating setup) was operated for maximizing water reuse and year-round intensive food production (Nile tilapia, Oreochromis niloticus , and leaf lettuce) at different fish feed to plants ratios. The system consisted of a fish culture component, solid removal component, and hydroponic component comprising six long channels with floating styrofoam rafts for holding plants. Fish culture effluents flowed by gravity from the fish culture component to the solid removal component and then to the hydroponic component. Effluents were collected in a sump from which a 1-horsepower in-line pump recirculated the water back to the fish culture tanks at a rate of about 250 L/min. The hydroponic component performed as biofilter and effectively managed the water quality. Fish production was staggered to harvest one of the four fish tanks at regular intervals when fish attained a minimum weight of 250 g. Out of the total eight harvests in 13 mo, net fish production per harvest averaged 33.5 kg/m³ of water with an overall water consumption of 320 L/kg of fish produced along with the production of leaf lettuce at 42 heads/m² of hydroponic surface area. Only 1.4% of the total system water was added daily to compensate the evaporation and transpiration losses. A ratio of 56 g fish feed/m² of hydroponic surface effectively controlled nutrient buildup in the effluents. However, plant density could be decreased from 42 to 25–30 plants/m² to produce a better quality lettuce.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

FDI in Space Revisited: The Role of Spillovers on Foreign Direct Investment within the European Union

We estimate a spatial econometric interaction model for bilateral aggregate FDI stock data between 25 European Union member countries in 2010. We find evidence for spatial spillovers of foreign direct investment for three different types of spatial dependence. Our results document FDI spillovers between neighboring countries of FDI origin countries, neighboring countries of FDI destination countries as well as between neighboring countries of both FDI origin and destination countries. Relying on recently developed methods, we provide the first model‐consistent interpretation of marginal effects of market size (measured by GDP) as well as GDP per capita on bilateral FDI activity. Our research highlights the importance of taking into account spatial lags when estimating bilateral FDI gravity models.