Spermatophore cryopreservation and artificial insemination of black tiger shrimp, Penaeus monodon (Fabricius)

To develop an appropriate cryopreservation protocol for spermatophores of black tiger shrimp, Penaeus monodon, three cryoprotectants (dimethyl sulphoxide (DMSO), methanol (MeOH) and ethylene glycol (EG)) at two concentrations (5% and 10%) were examined. Artificial implantation of spermatophores was also carried out to assess the fertilizing ability of fresh and post‐thaw spermatophores. Spermatophores were collected during consecutive regenerations (15‐day intervals) and assessed for qualitative and quantitative changes and also for fertilizing ability by implantation. The mean fertilization rate for artificial insemination using post‐thaw spermatophore was 79.9±3.7%, lower than the fertilization rates observed for artificial implantation using fresh spermatophore and natural mating. Mean hatch rates for fresh spermatophore, frozen‐thawed spermatophore and natural mating were 88.8±0.6%, 87.8±0.4% and 88.3±0.5%, respectively; and there was no difference among the three groups. The mean fertilization rate of spermatophores collected during the first stripping was higher (90.6±0.6) than during the second stripping (85.7±2.6), but the mean hatch rate was not different between the two strippings. The highest mean sperm viability (79.7±0.4%) was obtained from DMSO (5%), with no survival observed in the 10% MeOH treatment. Spermatophore weight, total sperm count and percentage of abnormal sperm were not different between spermatophores collected at the first and second stripping. This is the first study to report high fertilization and hatch rates from cryopreserved spermatophore using artificial implantation of spermatophore before spawning.     

Biology and life table of Diaeretiella rapae against Brevicoryne brassicae on different cultivars of cauliflower

Phytoparasitica - Diaeretiella rapae (McIntosh) (Hymenoptera: Braconidae) is one of the most promising, effective and a common endoparasitoid of different aphid species including cabbage aphid,...     

Cell wall polysaccharides from chalkumra (Benincasa hispida) fruit. Part I. Isolation and characterization of pectins

Pectic polysaccharides were obtained from chalkumra (Benincasa hispida) fruit by sequential extraction with ammonium oxalate (fraction BOX), dilute acid (fraction BHCl), and cold dilute alkali (fraction BOH). The highest yield of polysaccharides was obtained with oxalate and HCl. BOX was enriched in partly methyl-esterified galacturonic acid, whereas BHCl and BOH contained mostly galactose. All of the extracts showed similar elution patterns in size exclusion chromatography although the intrinsic viscosities (eta) were different (132 +/- 6, 100 +/- 5, and 285 + 10 mL/g for BOX, BHCl, and BOH, respectively). From fractionation by anion exchange chromatography, homogalacturonan (as seen from sugar analysis and Fourier transform infrared spectrum) accounted for more than half of BOX and 11% of BHCl. Methylation analyses and hydrolysis of BHCl with endo-beta-(1-->4)-d-galactanase showed the presence of beta-(1-->4)-d-galactan. The neutral galactan represented more than 76% of BHCl and approximately 40% of BOH. The other polysaccharides were complex galactans in BOH and an acidic arabinan (<1%) in BOX and BHCl.     

To pool or not to pool? Guidelines for pooling samples for use in surveillance testing of infectious diseases in aquatic animals

Samples from multiple animals may be pooled and tested to reduce costs of surveillance for infectious agents in aquatic animal populations. The primary advantage of pooling is increased population‐level coverage when prevalence is low (<10%) and the number of tests is fixed, because of increased likelihood of including target analyte from at least one infected animal in a tested pool. Important questions and a priori design considerations need to be addressed. Unfortunately, pooling recommendations in disease‐specific chapters of the 2018 OIE Aquatic Manual are incomplete and, except for amphibian chytrid fungus, are not supported by peer‐reviewed research. A systematic review identified only 12 peer‐reviewed aquatic diagnostic accuracy and surveillance studies using pooled samples. No clear patterns for pooling methods and characteristics were evident across reviewed studies, although most authors agreed there is a negative effect on detection. Therefore, our purpose was to review pooling procedures used in published aquatic infectious disease research, present evidence‐based guidelines, and provide simulated data examples for white spot syndrome virus in shrimp. A decision tree of pooling guidelines was developed for use by peer‐reviewed journals and research institutions for the design, statistical analysis and reporting of comparative accuracy studies of individual and pooled tests for surveillance purposes.     

Soil and nutrients losses under different crop covers in vertisols of Central India

Purpose

Accelerated erosion removes fertile top soil along with nutrients through runoff and sediments, eventually affecting crop productivity and land degradation. However, scanty information is available on soil and nutrient losses under different crop covers in a vertisol of Central India. Thus, a field experiment was conducted for 4 years (2010–2013) to study the effect of different crop cover combinations on soil and nutrient losses through runoff in a vertisol.

Materials and methods

Very limited information is available on runoff, soil, and nutrient losses under different vegetative covers in a rainfed vertisol. Thus, the hypothesis of the study was to evaluate if different crop cover combinations would have greater impact on reducing soil and nutrient losses compared to control plots in a vertisol.

This experiment consisted of seven treatment combinations of crop covers namely soybean (Glycine max) (CC₁), maize (Zea mays) (CC₂), pigeon pea (Cajanus cajan) (CC₃), soybean (Glycine max)?+?maize (Zea mays) ??1:1 (CC₄), soybean (Glycine ma x))?+?pigeon pea (Cajanus cajan) ?2:1 (CC₅), maize (Zea mays)?+?pigeon pea (Cajanus cajan) ??1:1 (CC₆), and cultivated fallow (CC₇). The plot size was 10?×?5 m with 1% slope, and runoff and soil loss were measured using multi-slot devisor. All treatments were arranged in a randomized block design with three replications.

Results and discussion

Results demonstrated that the runoff and soil loss were significantly (p?<?0.05) higher (289 mm and 3.92 Mg ha^?1) under cultivated fallow than those in cropped plots. Among various crop covers, sole pigeon pea (CC₃) recorded significantly higher runoff and soil loss (257 mm and 3.16 Mg ha^?1) followed by that under sole maize (CC₂) (235 mm and 2.85 Mg ha^?1) and the intercrops were in the order of maize?+?pigeon pea (211 mm and 2.47 Mg ha^?1) followed by soybean?+?maize (202 mm and 2.38 Mg ha^?1), and soybean?+?pigeon pea (195 mm and 2.15 Mg ha^?1). The lowest runoff and soil loss were recorded under soybean sole crop (194 mm and 2.27 Mg ha^?1). The data on nutrient losses indicated that the highest losses of soil organic carbon (SOC) (25.83 kg ha^?1), total nitrogen (N), phosphorus (P), and potassium (K) (7.76, 0.96, 32.5 kg ha^?1) were recorded in cultivated fallow (CC₇) as compared to those from sole and intercrop treatments. However, sole soybean and its intercrops recorded the minimum losses of SOC and total N, P, and K, whereas the maximum losses of nutrients were recorded under pigeon pea (CC₃). The system productivity in terms of soybean grain equivalent yield (SGEY) was higher (p?<?0.05) from maize?+?pigeon pea (3358 kg ha^?1) followed by that for soybean?+?pigeon pea (2191 kg ha^?1) as compared to sole soybean. Therefore, maize?+?pigeon pea (1:1) intercropping is the promising option in reducing runoff, soil-nutrient losses, and enhancing crop productivity in the hot sub-humid eco-region.

Conclusions

Study results highlight the need for maintenance of suitable vegetative cover as of great significance to diffusing the erosive energy of heavy rains and also safe guarding the soil resource from degradation by water erosion in vertisols.

     

Comparative Performance of Rice with System of Rice Intensification (SRI) and Conventional Management using Different Plant Spacings

The System of Rice Intensification (SRI) reportedly enhances the yields of rice (Oryza sativa L.) through synergy among several agronomic management practices. This study was conducted to investigate the effects on rice plant characteristics and yield by comparing the plants grown with different methods of cultivation – SRI vs. recommended management practices (RMP) focusing on the impact of different plant spacings. Performance of individual hills was significantly improved with wider spacing compared with closer‐spaced hills in terms of root growth and xylem exudation rates, leaf number and leaf sizes, canopy angle, tiller and panicle number, panicle length and grain number per panicle, grain filling and 1000‐grain weight and straw weight, irrespective of whether SRI or RMP was employed. Both sets of practices gave their highest grain yield with the spacing of 20 × 20 cm; however, SRI yielded 40 % more than the recommended practice. At this spacing, canopies also had the highest leaf area index (LAI) and light interception during flowering stage. The lowest yield was recorded at 30 × 30 cm spacing under both the practices, as a result of less plant population (11 m^?2), despite improved hill performance. During the ripening stage, hills with wider spacing had larger root dry weight, produced greater xylem exudates, and transported these towards shoot at faster rates. These features contributed to the maintenance of higher chlorophyll levels, enhanced fluorescence and photosynthesis rates of leaves and supported more favourable yield attributes and grain yield in individual hills than in closely‐spaced plants. Moreover, these parameters further improved in SRI, apart from the enhanced percentage of effective tillers and showed substantial and positive impacts on grain yield (17 %) compared with recommended practice. In conclusion, wide spacing beyond optimum plant density, however, does not give higher grain yield on an area basis and for achieving this, a combination of improved hills with optimum plant population must be worked out for SRI.     

Potential of a novel antibiotic, 2-methylheptyl isonicotinate, as a biocontrol agent against fusarial wilt of crucifers

Screening for newer bioactive compounds from microbial metabolites resulted in the isolation of a novel antibiotic from the culture filtrate, Streptomyces sp 201, of a soil. The bioactive compound, with antifungal and antibacterial activity, was identified as 2-methylheptyl isonicotinate. The antifungal activity of live culture, culture broth and the isolated bioactive compound showed marked inhibition against dominant soil-borne phytopathogens such as Fusarium oxysporum Schlect, F moniliforme Sheldon, F semitectum Berkeley & Ravenel, F solani (Martius) Sacc and Rhizoctonia solani Kuehn. The compound had no effect on seed germination and seedling development as displayed by root and stem growth of the test plant species. In pot experiments with seedlings of cruciferous plants such as Raphanus sativus L (radish), Brassica campestris L (yellow mustard), Brassica oleracea var botrytis L (cauliflower), the antibiotic compound showed promising protective activity of 92% when seeds of the test plants were treated at a dose of 50 micrograms ml-1 prior to sowing. Seed treatment with a spore suspension (3 x 10(8) spores ml-1) of the Streptomyces sp 201 displayed protective activity in the range of 56-60%. Seeds coated with 2.5% methyl cellulose-amended spores of the antagonist showed protective activity in the range of 64-72%. Further, seed treatment with the culture filtrate of the antagonist also showed promising protective activity in the range of 64-84%.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Molecular markers based genetic relatedness studies in tissue culture propagated japanese plum cultivars Santa Rosa and Frontier

Genetic Resources and Crop Evolution - Santa Rosa and Frontier are the major Japanese plum (Prunus salicina Lindl.) cultivars grown throughout the world. The present investigation was performed to...     

Genetical relationships between reactions to bacterial leaf spot,yellow mosaic and Cercospora leaf spot diseases in mungbean (Vigna radiata)

Summary Studies on the inheritance pattern of bacterial leaf spot (BLS), yellow mosaic (YM) and Cercospora leaf spot (CLS) reactions in crosses of BLS and YM resistant/tolerant but CLS susceptible × CLS resistant but BLS and YM susceptible parents indicated that resistances to BLS and CLS were governed by single dominant genes, whereas YM tolerance was a monogenic recessive character. The studies also indicated that these three genes were inherited independently. The simple inheritance pattern and independent assortment of the genes governing resistance/tolerance to these diseases suggest that the usual breeding methods will be adequate to develop multi-disease resistant mungbean cultivars.Paper XII in the series Studies on resistance in crops to bacterial diseases in India.