Investigation on hydrostatic resistance and thermal performance of layered waterproof breathable fabrics

Waterproof breathable layered fabrics allow water vapor passing through, but resist liquid water to pass. This ability of the fabrics to protect rain and snow water while allowing sweat vapor to evaporate from inside to outside atmosphere, leads them to be used as outdoor sportswear or protective clothing. The big challenge of enhanced hydrostatic resistance of these fabrics with proper breathability and thermal comfort has widened the research scope. This study presents an experimental investigation on hydrostatic resistance and thermal behavior of layered waterproof breathable fabrics. Six different types of hydrophobic and hydrophilic membrane laminated layered fabrics were evaluated by varying different fabric parameters in the experiment. Hydrostatic resistance and water vapor permeability of the laminated fabrics were measured by SDL ATLAS Hydrostatic Head Tester and PERMETEST respectively. Thermal properties were evaluated by ALAMBETA instrument. Moreover, FX-3300 air permeability tester was used to measure air permeability which represents the porosity of the fabrics and computer based See System software was used for water contact angle measurement on the outer fabric surface in order to determine the hydrophobic and hydrophilic properties. This experiment clearly discusses the influence of different fabric characteristics and parameters on hydrostatic resistance and thermal properties of the breathable laminated fabrics. The results show that fabric material composition, density, thickness, and hydrophobic and hydrophilic membranes have significant effects on hydrostatic resistance, breathability and thermal properties of different laminated fabrics.     

A non-destructive approach for assessing decay in preservative treated wood

This study investigated the suitability of the non-destructive vibration-impulse excitation technique to assess the attack of preservative-treated wood in contact with the ground. Small stakes (10×5×100 mm³) of treated and untreated Scots pine sapwood were exposed to decay in laboratory-scale terrestrial ecosystems. Different soils were used to prove the influence of different types of wood destroying micro-organisms. Wood decay was monitored periodically for one year by determining mass losses and changes in dynamic modulus of elasticity. The results show a large variability in resistance against attacking fungi, depending on wood preservative and soil type. The non-destructive approach using the dynamic modulus of elasticity proved to be a good and sensitive tool for assessing the attack of stakes in laboratory soil testing.     

Land use history and historical soil erosion at Albersdorf (northern Germany) — Ceased agricultural land use after the pre-historical period

The Holocene landscape history and historical soil erosion were reconstructed at Albersdorf (Schleswig-Holstein, Germany) from soils and colluvial layers. In contrast to many landscapes in central Europe, agricultural land use and soil erosion were more frequent during pre-historical times, whereas it has almost ceased after the advent of history. Pre-historical soil erosion rates from about 0.1 to 6.9 t ha^− 1 a^− 1 were reconstructed with no significant differences between the prehistoric cultural phases. The study of buried soils within the soil/soil-sediment-sequences provided evidence for an acceleration of soil formation processes probably as a consequence of excessive prehistoric woodland pasture on poor sandy soils.     

Aerogel based nanoporous fibrous materials for thermal insulation

In this research work, the thermo physiological properties of polyester/polyethylene nonwoven composite wraps of varying thicknesses impregnated with aerogel were studied and compared. The SEM images were also taken to compare the physical configuaration of the aerogel based fibrous composites. Specific thermal properties like thermal conductivity, thermal resistance, thermal diffusivity and thermal absorptivity were measured using alambeta instrument. The air permeability of the thermal wraps was measured in air permeability tester. The relative water vapor permeability and absolute water vapor permeability was measured in Permetest. These tests were conducted to understand thermal properties, air and water vapor permeability of flexible aerogel based composites with nanoporous structure. The results of the experiments were statistically analyzed and found to be within confidence intervals.