Extrapituitary gonadotropin-releasing hormone (GnRH) binding sites in goldfish

In teleosts, as in other vertebrates, the secretion of pituitary gonadotropin (GTH) is mediated by the hypothalamic decapeptide, gonadotropin-releasing hormone (GnRH). Recent findings in teleosts indicate that GnRH receptors are not restricted to the pituitary gonadotropes and are also associated with somatotropes as well as being present in a number of other tissues. In the present study, we provide novel information on GnRH binding in a number of extrapituitary tissues in goldfish. However, we do not intend to provide full characterization of GnRH binding sites in various extrapituitary tissues in goldfish as this would clearly be outside the scope of this paper. In this study we examined GnRH binding in a number of extrapituitary tissues in goldfish and observed specific binding in ovary, testis, brain, liver and kidney. No specific GnRH binding was observed in muscle, skin, gut, gill and heart. In general, the present findings together with the results of other studies carried out in our laboratory demonstrate that mature goldfish ovary and testis contain two classes of GnRH binding sites, high affinity/low capacity and low affinity/high capacity sites with binding characteristics similar to those of the pituitary GnRH receptors. The brain of goldfish was also found to contain two classes of GnRH binding sites, a super-high affinity/low capacity and a low affinity/high capacity sites. Furthermore, study of goldfish liver and kidney demonstrated the presence of a single class of GnRH binding sites with characteristics different from those of pituitary, ovary, testis and brain. Overall, it is evident that goldfish contains a family of GnRH binding sites which can be classified into four groups based on binding affinities: 1) A class of high affinity binding sites present in the pituitary, ovary and testis, 2) a class of super high affinity sites so far only detected in the brain, 3) a class of intermediate-affinity GnRH binding sites in the liver and kidney, and 4) a class of low affinity binding sites present in all the tissues containing specific GnRH binding sites except for liver and kidney.     

Optimizing fertilizers doses and their effects on photosynthesis and biomass yield of Hibiscus cannabinus cultivated on BRIS soil

In tropical climate, huge amount of fertilizer need to be used for the cultivation of kenaf (Hibiscus cannabinus L.) in Beach Ridges Interspersed with Swales (BRIS) soil, however this approach is not cost effective and environmental friendly. Therefore, the optimizing of fertilizer rate for BRIS soils and selection of suitable soil amendments are crucial to get a higher yield. In this study, the effects of different combinations of urea, chicken manure and biochar on soil properties, growth performance and physiological characteristics of kenaf cultivated on the BRIS soil were investigated. Eight treatments were conducted namely: control (T1), biochar (T2), chicken manure (T3), urea (T4), chicken manure + urea (T5), biochar + chicken manure (T6), urea + biochar (T7) and biochar + chicken manure + urea (T8). The biomass and physiological characteristics of kenaf were recorded every month, while the soil was analyzed following a standard laboratory procedure. The application of organic and inorganic fertilizer (urea) significantly increased the nutrient content of the soil compared to the T1, whereas T3 showed the highest pH, cation exchange capacity, and exchangeable bases (Na, Mg, Ca). However, the mixing of biochar with organic and inorganic fertilizers showed the highest plant height, diameter of stem and number of leaves as well as dry biomass compared to other treatments. Furthermore, the application of nitrogen fertilizer significantly increased the photosynthesis rate and stomatal conductivity. The results suggest that the mixing of biochar with organic and inorganic fertilizers represents an effective approach for the cultivation of kenaf in tropical climate.     

Transparent Polycaprolactam Electrospun Nanofibers Doped with 1,10-phenanthroline Optical Sensor for Colorimetric Determination of Iron (II) and Vitamin C

A novel optical chemical sensor based on a transparent electrospun nanofibrous scaffold, composed of polycaprolactam (PA6) and 1,10-phenanthroline (Phen), deposited on a glass slide and impregnated with polyvinyl alcohol (PVA) was coupled with UV-vis spectrophotometry and used for colorimetric determination of ferrous ion (Fe²⁺) and ascorbic acid (AA). The electrospun nanofibers were characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) techniques. The main factors affecting performance of the optical sensor (PA6-Phen/PVA@glass) including Phen dosage, pH of sample solution, electrospinning time, polymer solution flowrate, electrospinning voltage, and PVA amount were investigated and the related optimum values were obtained. The analytical merits of the sensor for quantitative determination of Fe²⁺ and ascorbic acid was evaluated. The limit of detection (LOD) and limit of quantification (LOQ) for Fe²⁺ were 1 and 3 μg mL^-1, respectively. The linear dynamic range (LDR) was 3–150 μg mL^-1 with the determination coefficient (R²) of 0.991. The relative standard deviation (RSD %, n=3) for a solution of 60 μg mL^-1 was 5.4 %. For determination of AA, LOD and LOQ were obtained equal to 0.5 and 2 μg mL^-1, respectively. The linear dynamic range was in the 2–200 μg mL^-1 range with a R2 of 0.994. The RSD % at 100 μg mL^-1, n=3) was equal to 7.0 %. The sensor was applied successfully to the detection of Fe(II) and AA in real water samples and aspirin tablets.     

Microalgae as Contributors to Produce Biopolymers

Biopolymers are very favorable materials produced by living organisms, with interesting properties such as biodegradability, renewability, and biocompatibility. Biopolymers have been recently considered to compete with fossil-based polymeric materials, which rase several environmental concerns. Biobased plastics are receiving growing interest for many applications including electronics, medical devices, food packaging, and energy. Biopolymers can be produced from biological sources such as plants, animals, agricultural wastes, and microbes. Studies suggest that microalgae and cyanobacteria are two of the promising sources of polyhydroxyalkanoates (PHAs), cellulose, carbohydrates (particularly starch), and proteins, as the major components of microalgae (and of certain cyanobacteria) for producing bioplastics. This review aims to summarize the potential of microalgal PHAs, polysaccharides, and proteins for bioplastic production. The findings of this review give insight into current knowledge and future direction in microalgal-based bioplastic production considering a circular economy approach. The current review is divided into three main topics, namely (i) the analysis of the main types and properties of bioplastic monomers, blends, and composites; (ii) the cultivation process to optimize the microalgae growth and accumulation of important biobased compounds to produce bioplastics; and (iii) a critical analysis of the future perspectives on the field.     

Rapid one-step separation and purification of recombinant phenylalanine dehydrogenase in aqueous two-phase systems

Background: Phenylalanine dehydrogenase (PheDH; EC 1.4.1.20) is a NAD+-dependent enzyme that performs the reversible oxidative deamination of L-phenylalanine to phenylpyruvate. It plays an important role in detection and screening of phenylketonuria (PKU) diseases and production of chiral intermediates as well. The main goal of this study was to find a simple and rapid alternative method for purifying PheDH. Methods: The purification of recombinant Bacillus sphaericus PheDH was investigated in polyethylene glycol (PEG) and ammonium sulfate aqueous two-phase systems (ATPS). The influences of system parameters including PEG molecular weight and concentration, pH and (NH4)2SO4 concentration on enzyme partitioning were also studied. The purity of enzyme was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Results: A single extraction process was developed for separation and purification of recombinant PheDH from E. coli BL21 (DE3). The optimized conditions for partitioning and purification of PheDH were 9% (w/w) PEG-6,000 and 16% (w/w) (NH4)2SO4 at pH 8.0. The partition coefficient, recovery, yield, purification factor and specific activity values were achieved 58.7, 135%, 94.42%, 491.93 and 9828.88 U/mg, respectively. Also, the Km values for L-phenylalanine and NAD+ in oxidative deamination were 0.21 and 0.13 mM, respectively. Conclusion: The data presented in this paper demonstrated the potential of ATPS as a versatile and scaleable process for downstream processing of recombinant PheDH.     

Effects of nano-silver impregnation on brittleness, physical and mechanical properties of heat-treated hardwoods

The present study investigates the effect of heat treatment of untreated and nano-silver-impregnated Populus nigra, Populus deltoides and Fagus orientalis on the physical and mechanical properties. Specimens were impregnated with a 200-ppm aqueous silver nanoparticles suspension. Heat treatment was carried out at temperatures of 135 ± 3 °C and 185 ± 3 °C. Nano-silver impregnation aggravated the effects of heat treatment. Although significant in some cases, nano-silver impregnation did not seem to have great effect on physical properties. It may be concluded that although NS impregnation aggravated the effects of heat treatment on solid woods, other factors may also be involved such as the species and density of the wood.     

Anti-inflammatory activities of cucurbitacin E isolated from Citrullus lanatus var. citroides: role of reactive nitrogen species and cyclooxygenase enzyme inhibition

The in vivo and in vitro mechanistic anti-inflammatory actions of cucurbitacin E (CE) (Citrullus lanatus var. citroides) were examined. The results showed that LPS/INF-γ increased NO production in RAW264.7 macrophages, whereas L-NAME and CE curtailed it. CE did not reveal any cytotoxicity on RAW264.7 and WRL-68 cells. CE inhibited both COX enzymes with more selectivity toward COX-2. Intraperitoneal injection of CE significantly suppressed carrageenan-induced rat's paw edema. ORAC and FRAP assays showed that CE is not a potent ROS scavenger. It could be concluded that CE is potentially useful in treating inflammation through the inhibition of COX and RNS but not ROS.     

Study on the effect of nano-silver impregnation on mechanical properties of heat-treated <Emphasis Type="Italic">Populus nigra</Emphasis>

The present study is aimed at investigating the effect of heat treatment of nano-silver-impregnated Populus nigra on weight loss, modulus of rupture (MOR), modulus of elasticity (MOE), and compression parallel to grain. Specimens were impregnated with 200 PPM water-based solution of nano-silver particles at 2.5 bar in a pressure vessel. For heat treatment, both nano-silver-impregnated and simple specimens were kept for 24 h at 45°C and then further for 24 h at 145°C and finally for 4 h at 185°C. MOR decreased from 529 to 461 kg/cm² in heat-treated specimens; MOE and compression parallel to grain were though improved. Also, comparison between heat-treated and nano-silver-impregnated heat-treated specimens showed that there was a decrease in MOR and MOE in nano-silver-impregnated heat-treated specimens. This shows that nano-silver impregnation facilitates transfer of heat in wood and it may increase the process of degradation and pyrolysis of wood structures in deeper parts of specimens.     

Optimising cutting method and timing for the control of Abutilon theophrasti seed production

Abutilon theophrasti (velvetleaf) is a widespread and problematic annual weed. Greenhouse and field experiments were conducted to investigate the effects of different cutting methods on the viability of A. theophrasti seeds. Three cutting methods were assessed: (1) Entire plant cut and dried (EPD)—plants were cut at soil level and dried with capsules attached on the greenhouse bench or soil surface for 4 weeks; (2) capsules detached and dried (CD)—capsules were removed from plants and dried for 4 weeks; and (3) capsules detached and tested while fresh (CF)—a control treatment. Before drying, the developmental stage (stage one, dark green; stage two, light green; stage three, yellowish-green; or stage four, black with the slightly open capsule) and age (days after flowering, DAF) of each capsule was recorded. Seed viability was measured immediately in the CF treatment and after the 4-week drying period in the EPD and CD treatments. No seeds in the EPD and CD treatments were viable when harvested at the first developmental stage (1–8 DAF) in either experiment, but 100% of seeds in the CF treatment in the field were viable when harvested at 8 DAF. In both greenhouse and field experiments, seeds attained full viability at earlier harvest ages in CF than in EPD or CD treatments, suggesting that seeds might become viable relatively early in development but lose viability if allowed to dry. These findings could be applied to optimise late-season mechanical control of A. theophrasti.     

Shortening the generation cycle in faba bean (Vicia faba) by application of cytokinin and cold stress to assist speed breeding

The aim of this study was to reduce the length of the breeding cycle for faba bean by accelerating seed setting. We examined the mode and time of exogenous 6-benzylaminopurine (BAP) (cytokinin) application, and cold treatments and their combinations in two faba bean genotypes. Acropetal node number of pod and seed set and pollen viability were recorded during the experiments. Application of BAP improved pollen germination. The application of 10^–5 M BAP 4 days after flowering increased seed set at the lower nodes. Cold treatment (8/4°C day/night for 2 days) after the onset of flowering induced the formation of more pods and faster pod set compared to the non-cold treatment. The time to first seed was significantly reduced, and pollen viability was increased in plants exposed to cold treatment. Increased pollen viability also showed a significant positive correlation with seed setting. The combinations of 10^–5 BAP and cold treatment together had similar and independent effects. These results will accelerate plant breeding in faba bean by providing additional tools for reducing generation time.