Addition of Sodium Stearoyl Lactylate to Corn and Sorghum Starch Extrudates Enhances the Performance of Pregelatinized Beer Adjuncts

Double mashing for wort production is a time‐consuming process that can be reduced if pregelatinized adjuncts are used. Optimal extruding conditions were determined to obtain brewing adjuncts from corn and sorghum starch. For corn starch extrusion, a Box–Behnken design was devised in which moisture, screw speed, temperature of the barrel, and concentrations of sodium stearoyl lactylate (SSL) were varied, and sorghum starch was extruded according to a 2³ model in which the modified variables were moisture, SSL concentration, and temperature. The aim was to maximize starch damage and minimize resistant starch and final viscosity as determined with a Rapid Visco Analyzer. The treatments that satisfied these requirements were mashed, and wort extract yield was determined. Glucose, maltose, and maltotriose concentrations in the resulting worts were determined by HPLC with a refractive index detector. Feedstock tempering and SSL content were the most important factors affecting the response; for corn starch, treatments with lower moisture (20%) and middle levels of SSL (0.5%) or with high levels of both moisture (40%) and SSL (1%) produced the most desirable samples for mashing, whereas for sorghum starch the best treatment was tempering to 20% moisture and containing middle levels of SSL (0.5%). No statistical differences were found between these experimental treatments and the control.     

Production and water use in lettuces under variable water supply

The effects of a variable water supply on the water use, growth and yield of two crisphead and one romaine (i.e., Cos) lettuce cultivar were examined in a field experiment using a line source sprinkler system that produced a range of water regimes that occur in growers fields. Four locations at increasing distances from the main line were monitored through the season (i.e., from thinning to harvest, 28–63 days after planting (DAP)). These locations at the end of the season corresponded to: (1) rewatering to field capacity (FC); (2) watering with a volume 13% below that required in the field capacity treatment (0.87*FC); (3) 30% below FC (0.70*FC); and (4) 55% below FC (0.45*FC). A linear production function for dry matter accumulation and fresh weight vs. crop evapotranspiration (ET_c) was determined for lettuce during this period, giving a water use efficiency for dry matter of 1.86 g m^–2 mm^–1 and for fresh weight of 48 g m^–2 mm^–1 . For lettuce irrigated to field capacity, ET_c between thinning and harvest was 146 mm; maximum crop coefficients of 0.81–1.02 were obtained at maturity (55–63 DAP). For the three irrigation treatments receiving the largest water application, ET_c was higher in the Cos culivar than in the two crisphead lettuce cultivars which had similar ET_c. Plant fresh weight was more sensitive than dry weight to reduction in water supply. In the FC treatment, root length density and soil water extraction were greatest in the top 0–45 cm, and decreased rapidly below 45 cm depth. Soil water extraction by roots increased at lower depths when irrigation was reduced. Instantaneous rates of leaf photosynthesis and leaf water potential showed no response to the irrigation treatments in this study, despite differences in biomass production. Evaporation was determined to be the major component of ET_c for 45 of the 63 days of the growing season. The large loss of water by evaporation during mid-season and the apparent insensitivity of lettuce to the volume of irrigation during this period may provide an opportunity for reducing irrigation applications.     

The industries of the future in Mexico: Local and non-local effects in the localization of “knowledge-intensive services”

The current characteristics in the global economy have defined “knowledge-intensive services” (KIS) as part of the so-called “industries of the future” due to the attributes of their employment and central function in the development processes in science, technology, art, and culture. This study outlines as a central hypothesis that the localization of KIS depends on different factors according to the type of knowledge being developed (analytical, synthetic, and symbolic). The main objective in this work is to explore the spatial economic factors associated with the localization and changes (positive and negative) when using KIS in the “national urban system” in México between 2004 and 2014. To do so, the services sector is defined according to the “intensity” and the “types” of knowledge that they develop. An analysis of spatial econometrics is carried out that distinguishes between the geographic (local) effect and the spatial (non-local) effect of the independent variables using data and microdata from the period 2004 to 2014. The results partly correspond with the central hypothesis of the study and offer possibilities of public policies to take advantage of and to promote the benefits of KIS, especially regarding cities in developing countries looking to become part of the 21st century economy.     

Effects of temperature and lipid droplet adherence on mortality of hatchery-reared southern hake Merluccius australis larvae

Effects of exogenous (water temperature) and endogenous (lipid droplet adherence) factors were experimentally tested on early survival of southern hake Merluccius australis reared under controlled conditions. Experiments to determine the effect of temperature (10, 12 and 14 °C) on larval growth rates and yolk-sac absorption rates of unfed southern hake were carried out under laboratory conditions. There was no significant differences in growth rates at the temperature range tested (ANCOVA, F = 0.164, p > 0.25), but yolk-sac absorption rates and mortality increased with temperature (ANCOVA, F = 53.84, p < 0.001). A high percentage (between 31 and 81%) of hake eggs showed a lipid droplet not adhered (i.e., freely moving in the yolk, and not located in the posteriormost portion of the yolk-sac). In a second experiment, fed southern hake larvae with the lipid droplet not adhered during embryonic development did not survive after yolk-sac absorption. This study provides the first data on the influence of the lipid droplet absorption on larval survival of cultured hake, and can be used as an early indication of the quality of the batch.     

The development of the Norwegian wrasse fishery and the use of wrasses as cleaner fish in the salmon aquaculture industry

Norway leads the world aquaculture production of Atlantic salmon Salmo salar and farmed Norwegian Atlantic salmon is currently consumed around the globe. However, sea lice infestation is a major problem faced by the salmon aquaculture industry in Norway and elsewhere. The use of wild-caught cleaner fish, mainly wrasses, has been recommended over the other available methods as the most economical and environmentally friendly option to control sea lice infestation in salmon farming. Here, we review the development of the Norwegian wrasse fishery and the use of wrasses as cleaner fish. In this document, we address the sea lice problem and introduce the main wrasse species employed as cleaner fish, document the cleaning behaviour of wrasses, present the development of a new wrasse fishery associated with the salmon aquaculture industry, and finally, we identify the main challenges associated with the intensive use of wild-caught cleaner wrasses and provide some insight for future directions of the wrasse fishery and further development of aquaculture techniques to supply salmon facilities with domesticated cleaner fish.     

Shell marking by artificial feeding of the tropical abalone Haliotis asinina Linne juveniles for sea ranching and stock enhancement

A method of marking abalone (Haliotis asinina Linne) for sea ranching and stock enhancement purposes was developed. Three‐month‐old abalone juveniles (11.8‐mm shell length, 0.28 g) were fed artificial diets for 1, 2, or 3 weeks. The width of the bluish‐green shell band produced by abalone juveniles was 1.7, 2.6, and 4.2 mm after 1, 2, or 3 weeks of feeding respectively. The growth and survival of juveniles fed artificial diets did not differ from that of juveniles fed the seaweed Gracilariopsis bailinae (control). Feeding the diet‐fed juveniles with the seaweed thereafter produced the natural brownish shell, thus forming a sandwiched bluish‐green band. An experimental release in outdoor tanks with natural growth of seaweeds and diatoms, and in a marine reserve showed that the shell band remained clear and distinct, indicating the usefulness of this shell marking method in sea ranching and stock enhancement of abalone.     

Biochemical,Physical, Chemical,and Microbiological Assessment of Blue Shrimp (Litopenaeus stylirostris) Stored in Ice

Postmortem changes in blue shrimp (Litopenaeus stylirostris) muscle were studied on the basis of biochemical, chemical, physical, and microbiological changes during an 18 day storage period at 0°C. Adenosine 5′-triphosphate (ATP) content, breakdown products, K-value, pH, trimethylamine nitrogen (TMA-N), total volatile basic nitrogen (TVB-N), water holding capacity (WHC), color, and texture (shear force) changes were examined. Also, total mesophilic and psychrophilic bacterial counts were measured. K-value increased linearly (r² = 0.98) from an initial value of 1.37 ± 0.59 to 59.42 ± 6.05% at Day 18. Spoilage indicators TVB-N and TMA-N increased from 29.56 ± 1.33 and 0.69 ± 0.25 to 39.04 and 2.04 ± 0.59 mg of N/100 g at Day 18, respectively; meanwhile, the total viable counts of mesophilic and psychrophilic bacteria increased from 3.48 ± 0.44 and 2.61 ± 0.29 log CFU/g to 6.27 ± 0.21 and 7.14 ± 0.39 log CFU/g, respectively, which indicated spoilage at the end of the storage period. The pH, texture, WHC, and color were affected (p < 0.05) during the storage period. Overall, results indicate that blue shrimp muscle quality was maintained for 12 days of storage in ice.     

Simulation of transpiration, drainage, N uptake, nitrate leaching, and N uptake concentration in tomato grown in open substrate

Free-drainage or “open” substrate system used for vegetable production in greenhouses is associated with appreciable NO₃⁻ leaching losses and drainage volumes. Simulation models of crop N uptake, N leaching, water use and drainage of crops in these systems will be useful for crop and water resource management, and environmental assessment. This work (i) modified the TOMGRO model to simulate N uptake for tomato grown in greenhouses in SE Spain, (ii) modified the PrHo model to simulate transpiration of tomato grown in substrate and (iii) developed an aggregated model combining TOMGRO and PrHo to calculate N uptake concentrations and drainage NO₃⁻ concentration. The component models simulate NO₃⁻-N leached by subtracting simulated N uptake from measured applied N, and drainage by subtracting simulated transpiration from measured irrigation. Three tomato crops grown sequentially in free-draining rock wool in a plastic greenhouse were used for calibration and validation. Measured daily transpiration was determined by the water balance method from daily measurements of irrigation and drainage. Measured N uptake was determined by N balance, using data of volumes and of concentrations of NO₃⁻ and NH₄⁺ in applied nutrient solution and drainage. Accuracy of the two modified component models and aggregated model was assessed by comparing simulated to measured values using linear regression analysis, comparison of slope and intercept values of regression equations, and root mean squared error (RMSE) values. For the three crops, the modified TOMGRO provided accurate simulations of cumulative crop N uptake, (RMSE = 6.4, 1.9 and 2.6% of total N uptake) and NO₃⁻-N leached (RMSE = 11.0, 10.3, and 6.1% of total NO₃⁻-N leached). The modified PrHo provided accurate simulation of cumulative transpiration (RMSE = 4.3, 1.7 and 2.4% of total transpiration) and cumulative drainage (RMSE = 13.8, 6.9, 7.4% of total drainage). For the four cumulative parameters, slopes and intercepts of the linear regressions were mostly not statistically significant (P < 0.05) from one and zero, respectively, and coefficient of determination (r²) values were 0.96-0.98. Simulated values of total drainage volumes for the three crops were +21, +1 and −13% of measured total drainage volumes. The aggregated TOMGRO-PrHo model generally provided accurate simulation of crop N uptake concentration after 30-40 days of transplanting, with an average RMSE of approximately 2 mmol L⁻¹. Simulated values of average NO₃⁻ concentration in drainage, obtained with the aggregated model, were −7, +18 and +31% of measured values.     

Influence of Salinity in the Bioavailability of Zn in Sediments of the Gulf of Cádiz (Spain)

This study assesses the effect of salinity in bioavailability and toxicity of Zn by means of laboratory bioassays by observing contamination in both sediment and water, accumulation of Zn in biological tissues, and histopathological damage in the gills and guts tissues of Ruditapes philippinarum clams, which were exposed to different types of sediments from the Gulf of Cádiz (SW Spain) as well as two dilutions of toxic mud coming from an accidental mining spill. With this objective, the coefficients of distribution (K _D) for Zn between overlying water and sediments were calculated, the histopathological frequencies in the tissues of the gills and guts of clams were determined, and the biota-sediment bioaccumulation factors as well as the bioaccumulation factors were quantified in the different stations. Results showed that the greatest histopathological damages appeared when the salinity values decreased. Statistical results showed that salinity was inversely correlated with histopathological damage (p?<?0.01) for the lesion index for gills. The most outstanding results were observed in the two dilutions of toxic mud (0.3% and 7.9%) at a salinity value of 10. Salinity was inversely correlated with the concentration of Zn in biological tissues (p?<?0.05) and inversely correlated with the concentration of Zn in water and sediment. Zn mobilization to the overlying water is produced when salinity values decrease.     

Kinetic model for the antiradical activity of the isolated p-catechol group in flavanone type structures using the free stable radical 2,2-diphenyl-1-picrylhydrazyl as the antiradical probe

The time evolution of 2,2-diphenyl-1-picrylhydrazyl radical (DPPH*) concentration in four solvents (methanol, ethanol, propanol, and acetonitrile) during its reduction by three flavanones containing an isolated p-catechol group (taxifolin, eriodyctiol, and fustin) as well as the time evolution of the mass spectra of the reaction mixture has been determined by spectrophotometry and liquid mass spectrometry, respectively. In alcoholic solvents the reduction curves consisted of an initial short but fast kinetics step followed by a longer slow kinetics step; in contrast, in acetonitrile the reduction curves completely lacked the slow kinetics step. From the results, a kinetic model for the reaction of reduction of the DPPH* by the isolated p-catechol group in flavanone type structures is proposed. According to this model, the p-catechol group rapidly transfers two hydrogen atoms to DPPH*, through a fast rate constant k1, yielding the corresponding o-quinone. Then, the intermediate o-quinone forms an adduct with the alcoholic solvent, through a slow rate constant k2, and regenerates the p-catechol group. The regenerated p-catechol group reduces additional DPPH* through a fast rate constant k3, yielding the corresponding o-quinone, which can form a new adduct with the solvent to regenerate the p-catechol group, and so on. From the kinetics model, two explicit kinetics equations have been derived that fit very well the experimental data points acquired from all assayed compounds in all of the experiments carried out, thus allowing an accurate determination of the corresponding rate and stoichiometric constants.