Nitrogenase MoFe-protein at 1.16 A resolution: a central ligand in the FeMo-cofactor

A high-resolution crystallographic analysis of the nitrogenase MoFe-protein reveals a previously unrecognized ligand coordinated to six iron atoms in the center of the catalytically essential FeMo-cofactor. The electron density for this ligand is masked in structures with resolutions lower than 1.55 angstroms, owing to Fourier series termination ripples from the surrounding iron and sulfur atoms in the cofactor. The central atom completes an approximate tetrahedral coordination for the six iron atoms, instead of the trigonal coordination proposed on the basis of lower resolution structures. The crystallographic refinement at 1.16 angstrom resolution is consistent with this newly detected component being a light element, most plausibly nitrogen. The presence of a nitrogen atom in the cofactor would have important implications for the mechanism of dinitrogen reduction by nitrogenase.     

Effect of log seasonality on reproductive potential ofMonochamus galloprovincialis reared in scots pine logs under laboratory conditions

Insect reproduction may be affected by a number of factors including seasonal changes in larval or adult nutrition. The effect of season on the reproductive potential ofMonochamus galloprovincialis (Olivier) females reared inPinus sylvestris L. (Scots pine) logs was investigated by constructing fertility tables for each log that differed only in the season they were cut. Population parameters were compared among three seasonal cohorts. The intrinsic rate of increase and most of the associated population parameters of beetles that emerged from logs cut during spring were higher than for beetles emerged from summer and autumn logs. Slight differences were found between summer and autumn cohorts. We suggest that seasonal differences in the nutritional quality of logs caused differences inM. galloprovincialis survival and reproductive potential. http://www.phytoparasitica.org posting March 16, 2008.     

Frictional and tensile properties of conducting polymer coated wool and alpaca fibers

Wool and alpaca fibers were coated with polypyrrole by vapor-phase polymerisation method. The changes in frictional and tensile properties of the single fibers upon coating with the conductive polymer are presented. Coating a thin layer of polypyrrole on the alpaca and wool fibers results in a significant reduction in the fiber coefficient of friction, as the conducting polymer layer smooths the protruding edges of the fiber scales. It also reduces the directional friction effect of the fibers. Depending on the type of fiber, the coating may slightly enhance the tensile properties of the coated fibers.     

Decay of electrical conductivity in p-toluene sulfonate doped polypyrrole films

Long term performance of conductivity of p-toluene sulfonic acid (pTSA) doped electrochemically synthesized polypyrrole (PPy) films was estimated from accelerated aging studies between 80 °C and 120 °C. Conductivity decay experiments indicated that overall aging behavior of PPy films deviated from first order kinetics at prolonged aging times at elevated temperatures. However, an approximate value for the activation energy of the conductivity decay of PPy was calculated as E=47.4 kJ/mol, enabling an estimate of a rate constant of k=8.35×10⁻⁶/min at 20 °C. The rate of decrease of conductivity was not only temperature dependent but also influenced by the dopant concentration. A concentration of 0.005 M pTSA in the electrolyte resulted in a conductive film and when this film was exposed to 120 °C for a period of 40 h, the conductivity decayed to about 1/20 of its original value. The concentration of pTSA was increased to 0.05 mol/l and when the resulting film was aged in the same way, it showed a decrease in the conductivity to about 1/3 of its original value. Both microwave transmission and dc conductivity data revealed that highly doped films were considerably more electrically stable than lightly doped films. The dopant had a preserving effect on the electrical properties of PPy.     

Effect of breed on fattening performance, slaughter and meat quality characteristics of Awassi and Morkaraman lambs

The influence of breed on fattening performance, slaughter and meat quality traits was studied in Awassi and Morkaraman male lambs at approximately 8 months of age. All of the groups were fed a diet consisting of concentrate mixture offered ad libitum, and 300 g of grass hay per lamb per day during 60-day fattening period. Initial live weight, final live weight, daily weight gain and feed conversion efficiency (concentrate and hay consumption for 1 kg of live weight gain) were 39.63 kg, 55.08 kg, 0.258 kg and 6.37 for Awassi; 40.54 kg, 55.58 kg, 0.234 kg and 6.77 for Morkaraman, respectively. The effect of breed on fattening performance and slaughter traits except for LD area was not significant. In addition, meat colour parameters (L = lightness, a = redness, b = yellowness, H = hue angle and C = chroma), pH values, drip loss and sensory attributes were not affected by breed in present study. A significant muscle effect was observed for instrumental measurements of some meat quality characteristics as meat colour parameters (L, a and C), collagen, drip loss, pH, moisture and protein content, WBS, and for some sensory attributes (tenderness, juiciness, acceptability and number of chewing). Results of this study indicate that fattening performance, slaughter and meat quality traits were similar between Awassi and Morkaraman male lambs.     

Shearing male lambs in the cold season improves the carcass yield without affecting fattening performance

This research was carried out to determine the effects of shearing of different genotypes of male lambs (one from pure Karayaka stock and two from its crossbreed) in winter on bodyweight gain, feed consumtion, feed conversion efficiency, rectal temperature and carcass yield. A total of 21 lambs aged 8 months were allocated randomly to experimental groups according to a 2 × 3 factorial arrangement for shorn and unshorn animals. The lambs were fed grass hay (100 g/lamb/day) and commercial concentrate feed ad libitum during a 54‐day of fattening period. The lambs were shorn in the middle of the experiment (27 days after beginning the trial). The interaction between the shearing treatment × genotype of the studied parameters was found to be insignificant. The shearing process increased the rectal temperature (P < 0.01), hot carcass yield (P < 0.05) and dressing percentage (P < 0.05) and decreased the weight of the edible inner organs (P < 0.01). Some of these parameters were affected by the genotypes. It was concluded that shearing male lambs in the winter can have a beneficial effect on the hot carcass weight and dressing percentage without affecting fattening performance, and the performance of Karayaka lambs and its crossbred male lambs were similar under the conditions of the present study.     

Characterization of conductive polypyrrole coated wool yarns

Wool yarns were coated with conducting polypyrrole by chemical synthesis methods. Polymerization of pyrrole was carried out in the presence of wool yarn at various concentrations of the monomer and dopant anion. The changes in tensile, moisture absorption, and electrical properties of the yarn upon coating with conductive polypyrrole are presented. Coating the wool yarns with conductive polypyrrole resulted in higher tenacity, higher breaking strain, and lower initial modulus. The changes in tensile properties are attributed to the changes in surface morphology due to the coating and reinforcing effect of conductive polypyrrole. The thickness of the coating increased with the concentration of p-toluene sulfonic acid, which in turn caused a reduction in the moisture regain of the wool yarn. Reducing the synthesis temperature and replacing p-toluenesulfonic acid by anthraquinone sulfonic acid resulted in a large reduction in the resistance of the yarn.     

Optimization of polymerization conditions and thermal degradation of conducting polypyrrole coated polyester fabrics

PET fabric is coated with conducting polypyrrole (PPy) by oxidative polymerization from an aqueous solution of Py using ferric chloride hexahydrate (FeCl₃) as oxidant and p-toluene sulphonate (pTSA) as dopant. The optimum concentrations for Py, FeCl₃ and pTSA were found to be 0.11, 0.857 and 0.077 mol/l respectively, which yielded a conductive fabrics with resistivity as low as 72 Ω/sq. PPy fabric gained resistivity less than one order of magnitude when aged for 18 months at room temperature. The stabilizing effect of the dopant pTSA against thermal degradation was demonstrated; the undoped samples reached resistivity of around 40 kΩ, whereas doped samples reached less than 2 kΩ at the same temperature and time.     

Soil Bulk Density Estimation Methods: A Review

Measurement of soil bulk density is important for understanding the physical, chemical, and biological properties of soil. Accurate and rapid soil bulk density measurement techniques play a significant role in agricultural experimental research. This review is a comprehensive summary of existing measurement methods and evaluates their advantages, disadvantages, potential sources of error, and directions for future development. These techniques can be broadly categorised as direct and indirect methods. Direct methods include core, clod, and excavation sampling, whereas indirect methods include the radiation and regression approaches. The core method is most widely used, but it is time consuming and difficult to use for sampling multiple soil depths. The size of the coring cylinder used, operator experience, sampling depth, and in-situ soil moisture content significantly affect its accuracy. The clod method is suitable for use with heavy clay soils, and its accuracy is dependent on equipment calibration, drying time, and operator experience, but the process is complicated and time consuming. Excavation techniques are most commonly used to evaluate the bulk density of forest soils, but have major limitations as they cannot be used in soils with large pores and their measurement accuracy is strongly influenced by soil texture and the type of analysis selected. The indirect methods appear to have greater accuracy than direct approaches, but have higher costs, are more complex, and require greater operator experience. One such approach uses gamma radiation, and its accuracy is strongly influenced by soil depth. Regression methods are economical as they can make indirect measurements, but these depend on good, quality data of soil texture and organic matter content and geographical and climatic properties. Also, like most of the other approaches, its accuracy decreases with sampling depth.