The effects of earthworms, botanical diversity and fertiliser type on the vertical distribution of soil nutrients and plant nutrient acquisition

The application of phosphorus (P)-based fertiliser to agricultural soils can result in a skewed vertical distribution of P down the soil profile, since the element tends to accumulate at the soil surface. Such accumulation can have detrimental effects on the environment, as the erosion of surface soil can facilitate the transfer of large quantities of P out of the field into water bodies. Earthworm and plant communities are intricately linked to vertical nutrient distributions in soil, with both communities either facilitating or negating the incorporation of nutrients into the soil matrix. This study aimed to investigate the effect of earthworm presence, plant community structure and fertiliser type to affect the distribution of nutrients in experimental mesocosms; with particular emphasis on the vertical distribution of P. Mesocosms were designed to simulate a soil which has a high P concentration at the surface compared to further down the soil profile. It was hypothesised that the presence of earthworms would facilitate the incorporation of P into the soil matrix and the presence of a more botanically diversity community would assimilate a greater quantity of soil nutrients. After 1 year, mesocosms were deconstructed into five depth ranges, and the distribution of nutrients were modelled and analysed. Results indicated that the presence of earthworms did redistribute soil nutrients from the surface into the matrix beneath. This redistribution was apparent from a reduction in nutrient concentrations in the 0–1 cm depth range. The presence of a more botanically diverse community not only assimilated greater soil nutrient concentrations, but also promoted a less even vertical distribution of soil nutrients, demonstrating the importance of soil biota and plant diversity in the redistribution of soil nutrients.     

In vitro analysis of antiangiogenic activity of fungi isolated from clinical cases of equine keratomycosis

OBJECTIVE: The goal of this project was to explore the possibility that fungal organisms produce metabolites that inhibit angiogenesis. Procedures Fungal cultures were obtained from cases of keratomycosis, grown in Sabouraud's dextrose broth, and sterile filtered for use in experiments. The Matrigel assay was used to screen the filtrate samples for antiangiogenic activity. Matrigel is a basement membrane matrix that supports the differentiation of human umbilical vein endothelial (HUVE) cells into a capillary-like network of tubules. HUVE cells were cultured using standard techniques and passaged at confluence, with all cells being used at passage 3-6. HUVE cells (40 000 cells) were pipetted into each well of a 24-well tissue-culture plate coated with Matrigel. An aliquot of fungal media filtrate was added to each well and the plates allowed to incubate for 18 h, at which time they were evaluated for tubule formation. RESULTS: Two fungal isolates showed inhibition of tubule formation. The addition of 100, 200 and 400 &mgr;L of the fungal media filtrate from the first isolate (Fusarium sp. 99A34574) produced a consistent and dose-dependent inhibition of tubule formation. The second isolate (Aspergillus sp. 271599) did not show inhibition of tubule formation with 100 or 200 &mgr;L added to the wells, however, it did show inhibition at 400 &mgr;L/well. The remaining three isolates did not cause inhibition at any concentration. CONCLUSIONS: Our findings suggest that certain fungal organisms produce metabolites that inhibit tubule formation in vitro, and that these metabolites may play a significant role in altering the host vascular response to fungal infections of the cornea.     

Evaluation of two cocktails containing ESAT-6, CFP-10 and Rv-3615c in the intradermal test and the interferon-γ assay for diagnosis of bovine tuberculosis

The intradermal tuberculin tests and the interferon-gamma (IFN-γ) assay are the principal tests used worldwide for the ante-mortem diagnosis of bovine tuberculosis. The conventional reagent currently in use in these tests is purified protein derivative (PPD) tuberculin obtained from Mycobacterium bovis culture. The components of PPD are poorly characterized and difficult to standardize. To overcome this issue, antigens specific to the Mycobacterium tuberculosis complex are being studied. Here we have assessed the biological potency of ESAT-6, CFP-10 and Rv-3615c presented as peptide or recombinant protein cocktails in comparison with the standard bovine PPD used routinely in Spanish eradication campaigns. The study was performed in cattle (n=23) from a herd with natural M. bovis infection. Animals were simultaneously injected with PPD and the peptide and protein cocktails. The percentages of cattle reacting positively to single intradermal test were 60.9% (bovine PPD), 47.8% (peptide cocktail) and 60.9% (protein cocktail), with no significant difference between the actual skin fold thickness increases (p>0.05). The IFN-γ assay detected 60.9% of animals when stimulation was performed with bovine PPD, but decreased to 52.2% when stimulation was performed with the peptide cocktail and to 47.8% when stimulation was performed with the protein cocktail. However, no significant differences were found between IFN-γ responder frequencies (p>0.05). These results show a potential use of these defined reagents for in vivo tuberculosis diagnosis.     

Identifying crop yield gaps with site- and season-specific data-driven models of yield potential

Precision Agriculture - There is considerable interest and value in identifying the gap between crop yields that have actually been achieved, and yields that could have potentially been achieved. A...     

Insensitivity of soil biological communities to phosphorus fertilization in intensively managed grassland systems

Efficient soil P cycling is essential for promoting optimal and sustainable grassland growth. The soil biological community is regarded as an important source of available P to the plant community. However, the effects of P fertilization on the soil biota are unclear. This study aimed to investigate the effects of P fertilization on plant and soil biological communities in two intensively managed grassland sites that had been receiving mineral‐based P fertilization over a 14‐year period. Both pastures had been frequently cut and harvested for plant material and had received only inorganic fertilizers from the establishment of the trial. Both sites were sampled four times from October 2009 to April 2011 and plant and a range of soil biological parameters were determined at each sampling period. The main findings of this study showed that soil chemical measures, such as labile inorganic P and total P concentrations, and plant yield and P contents responded as expected to P fertilization. However, all soil biological parameters either showed no response or inconsistent responses to P fertilization over the experimental period. This study indicates that intensive management regimes, for example intensive plant harvesting and fertilizer regimes, appear to override the relationship between plant and soil biological communities with respect to their response to P fertilization, and thus their productivity is apparently not predicated upon biotic activity.     

A Parametric Transfer Function for Grain-Flow Within a Conventional Combine Harvester

Grain yield monitoring is an integral tool in the Precision Agriculture management system. When used in conjunction with a satellite-based navigation system, it provides spatial information on output variability, output response to managed inputs and is used to identify limiting resources in the crop production process. Accurately matching measured yield quantities with spatial units within a field is therefore important. At present, a simple linear time shift is employed by all commercial monitoring systems to account for the delay between GPS recorded positions and subsequent yield measurements. This study examines the internal process of grain transport to the sensor by monitoring the flow of strategically coloured grain. The flow is shown to be significantly influenced by mixing induced by threshing and auger transport processes. In contrast to the common assumption that grain moves as a spatially related cohort through to the sensor, the results suggest that a diffusion process is more realistic. A parametric model for the diffusion process is provided which suggests that from each individual yield measurement a maximum 20% of the mass could be assigned to a single spatial unit of the size that is typically allocated. The results imply that for further analyses, the inconclusive spatial origin and artificially smoothed quantities of instantaneous yield measurements should be considered.     

Increased sacral screw purchase minimizes screw loosening in canine triple pelvic osteotomy

OBJECTIVE: To determine if screw loosening in triple pelvic osteotomies (TPO) is minimized when screws cranial to the ilial osteotomy had maximal sacral purchase. STUDY DESIGN: Prospective study. ANIMALS: Forty-six dogs with decreased acetabular coverage of the femoral head and minimal degenerative joint changes. METHODS: TPOs were performed where screws cranial to the ilial osteotomy were inserted to maximally engage sacral bone. Data collected were: use of ilial and ischial cerclage wire, screw length, ventrodorsal radiographic sacral width (most caudal aspect), pelvic canal diameter, and sacral penetration of the 3 cranial screws. On all subsequent radiographs, changes in screw position, pelvic canal diameter, and sacral purchase were noted. RESULTS: For 69 TPOs, 414 screws were used. Mean radiographic cranial screw length was 34.54 mm. Combined sacral depth of all 3 screws was 93.3% of sacral width. All osteotomies healed uneventfully. Twenty-four screws (6%) loosened with 12 being in the most cranial positions. Use of ischial or ilial cerclage wires did not statistically influence screw loosening. Pelvic diameter decreased by a mean of 7.79% from postoperative radiographs to the last radiographic recheck. CONCLUSIONS: By sufficiently engaging the sacrum with screws cranial to the ilial osteotomy, implant failures can be avoided and screw loosening minimized when a 6-hole TPO plate is used. CLINICAL RELEVANCE: To minimize screw-loosening in TPO, screws inserted cranial to the ilial osteotomy should be inserted to maximum sacral depth without penetrating the vertebral canal.     

Quantifying leaf-scale variations in water absorption in lettuce from hyperspectral imagery: a laboratory study with implications for measuring leaf water content in the context of precision agriculture

Precision Agriculture - Variations in water absorption across lettuce leaves (Latuca sativa L. var. longifolia) were quantified from hyperspectral imagery acquired in the laboratory using selected...