Distribution and genetic diversity among Aspergillus flavus isolates across three agro-ecologies essential for maize cultivation in Ghana

Fungal mycotoxins are important contaminants of agricultural commodities that pose serious concerns to producers, consumers and exporters. Aflatoxin is a carcinogenic metabolite produced by the fungi Aspergillus flavus and A. parasiticus. These fungi and other mould species living in the soil contaminate several crops including maize. This study was undertaken with the following objectives: (i) to assess the presence of A. flavus and other moulds in Ghanaian soil; (ii) to determine the distribution and density of A. flavus under three agro-ecologies noted for major maize production; and (iii) to assess the effect of percentage of carbon (C) and nitrogen (N) and soil pH on A. flavus population densities and diversity in the isolates found across the agro-ecologies. The data showed seven moulds that were common across the agro-ecologies. Significant differences (P < 0.05) were observed in the A. flavus density and distribution within and across these agro-ecologies. Fumesua soils recorded the highest levels of A. flavus (1.185 × 10³ cfu g⁻¹) while Akomadan recorded the least (9.76 × 10² cfu g⁻¹). Percentage available C, N and soil pH did not significantly influence A. flavus density. The A. flavus isolates identified in this study varied in genetic sequence within the aflatoxin gene cluster, but these differences were not distinguishable by origin.     

Artificial Insemination of Gilts with 1.5 Billion Sperms Stored in Different Periods Associated with Different Pre-ovulatory Intervals

This study evaluated the reproductive performance of gilts inseminated at three intervals before ovulation (0-12, 13-23, 24-30 h) with sperm doses (SD) stored for 0-48 and 96-120 h. A total of 218 PIC Camborough 22 gilts were inseminated once with SD of 1.5 x 10(9) sperms. Pregnant gilts (n = 166) were slaughtered 30.8 +/- 3.7 days after artificial insemination. The number of corpora lutea (CL) and total embryos (TE) was counted. Pregnancy rates (PR) were analysed by chi-square test. TE and embryonic survival (ES), obtained as the ratio between viable embryos and CL, were analysed by GLM procedure (SAS) and mean values were compared by Tukey's test. Pregnancy rate was similar among artificial insemination-ovulation (AIOV) intervals when semen was stored for 0-48 h. However, the lowest PR was observed in the 24-30 h AIOV interval with storage time (ST) of 96-120 h (p < 0.05). There was a significant effect of the interaction between ST and AIOV (p < 0.05) on TE and ES variables. Total embryos and ES did not differ (p > 0.05) among AIOV intervals in ST of 0-48 h. However, gilts inseminated at 24-30 h AIOV interval with ST of 96-120 h showed a reduction of 6.7 embryos (p < 0.05) compared with gilts in the same interval inseminated with semen stored for 0-48 h. ES for the 24-30 h AIOV interval and ST of 96-120 h was lower than that observed in the other groups (p < 0.05).     

Holding Power of Different Pin Designs and Pin Insertion Methods in Avian Cortical Bone

Objective —To measure pullout strength of four pin types in avian humeri and tibiotarsi bones and to compare slow-speed power and hand insertion methods.
Study Design —Axial pin extraction was measured in vitro in avian bones.
Animal Population —Four cadaver red-tailed hawks and 12 live red-tailed hawks.
Methods —The pullout strength of four fixator pin designs was measured: smooth, negative profile threaded pins engaging one or two cortices and positive profile threaded pins. Part 1: Pins were placed in humeri and tibiotarsi after soft tissue removal. Part 2: Pins were placed in tibiotarsi in anesthetized hawks using slow-speed power or hand insertion.
Results —All threaded pins, regardless of pin design, had greater pullout strength than smooth pins in all parts of the study ( P < .0001). The cortices of tibiotarsi were thicker than the cortices of humeri ( P < .0001). There were few differences in pin pullout strengths between threaded pin types within or between bone groups. There were no differences between the pullout strength of pins placed by slow-speed power or by hand.
Conclusions —There is little advantage of one threaded pin type over another in avian humeri and tibiotarsi using currently available pin designs. There were few differences in pin pullout strengths between humeri and tibiotarsi bones. It is possible that the ease of hand insertion in thin cortices minimizes the potential for wobbling and therefore minimizes the difference between slow-speed drill and hand insertion methods.
Clinical Relevance —Threaded pins have superior bone holding strength in avian cortices and may be beneficial for use with external fixation devices in birds.     

The Post‐Cervical Insemination does not Impair the Reproductive Performance of Primiparous Sows

The study evaluated the reproductive performance of primiparous sows submitted to post‐cervical insemination (PCAI) compared with cervical artificial insemination (CAI). Difficulty with catheter introduction, the occurrence of bleeding or semen backflow during insemination, and volume and sperm cell backflow up to 60 min after insemination were also evaluated. Sows were homogenously distributed, according to body weight loss in lactation, lactation length, weaned piglets, weaning‐to‐oestrus interval and total born in previous farrowing, in two treatments: PCAI (n = 165) with 1.5 × 10⁹ sperm cells in 45 ml (2.4 ± 0.04 doses per sow) and CAI (n = 165) with 3 × 10⁹ sperm cells in 90 ml (2.5 ± 0.04 doses per sow). During PCAI, sows were inseminated in the absence of boars. Transabdominal real‐time ultrasonography was performed at oestrus onset, immediately before the first insemination and at 24 h after last insemination. There was no difference (P > 0.05) between treatments in farrowing rate (91.5% × 89.1%) and litter size (12.5 × 11.9 piglets born, respectively for PCAI and CAI sows). Successful passage of the intrauterine catheter in all the inseminations was possible in 86.8% (165/190) of sows initially allocated to PCAI treatment. Difficulty of introducing the catheter in at least one insemination did not affect the reproductive performance of PCAI sows (P > 0.05). Bleeding during insemination did not affect (P > 0.05) the farrowing rate in both treatments, but litter size was reduced in CAI and PCAI sows (P ≤ 0.06). Percentage of spermatozoa present in backflow within 1 h after insemination was greater in CAI than PCAI sows (P < 0.01). More than 85% of primiparous sows can be successfully post‐cervical inseminated with doses containing 1.5 × 10⁹ sperm cells in the absence of the boar during insemination without impairing the reproductive performance.     

Big impacts from small abstractions: The effects of surface water abstraction on freshwater fish assemblages

1. Abstractions and diversions are prevalent in river networks worldwide; however, specific mechanisms and measures reflecting changes in functional characteristics of aquatic assemblages in response to flow abstraction have not been well established. In particular, the influence of small takes on fish assemblages is poorly understood.
2. Field surveys and stable‐isotope analyses were used to evaluate the impact of differing levels of flow abstraction on fish assemblage structure, and native–non‐native patterns of coexistence, associated with small surface water abstractions in four streams in New Zealand. Study design accounted for longitudinal processes (spatial autocorrelation) to isolate the effects of abstractions on fish assemblages.
3. Reaches with reduced flows downstream of abstraction points had significantly lower fish abundances per metre of stream length, probably because of decreased habitat size, altered interspecific interactions and barriers to movement. The loss of larger fish in reaches with high abstraction resulted in shallower mass–abundance slopes and shorter stable isotope‐derived food‐chain lengths, likely to have been caused by fewer trophic links in the food web. The large fish absent from these reaches were flow‐sensitive introduced salmonids, resulting in higher relative abundances of small‐bodied native fish, probably as a result of predatory and competitive release.
4. Quantification of metrics designed to characterize ecosystem functioning as well as abundance and species composition indicated that small water abstractions can alter both the structure and composition of stream fish assemblages and modify the outcomes of native–non‐native species interactions. Thus, a better understanding of the effects of small abstractions could be used to improve the strategic management of fish in invaded riverscapes.

     

The global adaptation of bread wheat at high latitudes

Spring sown bread wheat is grown at high latitudes in Europe, Asia and North America. However, it is not clear what the associations are among environments, particularly in Asia and North America, and whether or not cultivars developed in one region may adapt in another. A yield trial comprised of cultivars developed in northern Kazakhstan, western Siberia, the Canadian Prairies, northern USA, northeastern China and broadly adapted genotypes bred by CIMMYT in Mexico was planted in all the above mentioned environments in 2002–2004. In general, cultivars performed best within the regions they were developed. However, cultivars developed in northern Kazakhstan/western Siberia were the most broadly adapted at high latitudes; they were not significantly different for grain yield from the locally developed cultivars in both China and Canada. Stronger photoperiod response, greater plant height and larger seed weight appeared to be key adaptive features of these materials. At lower latitudes, the Kazakh/Siberian cultivars were significantly lower yielding than all other materials. When low latitude Mexican sites were removed from the analysis, the Chinese locations tended to associate, whereas most Canadian and Kazak/Siberian locations were negatively associated with those from China. SSR analysis of the cultivars from each region split the materials into two general groups, one based on North American cultivars and one comprised of Kazakh/Siberian and Chinese cultivars. Lines developed in Mexico were spread across these two groupings. Evidence suggests that considerable scope exists to improve bread wheat adaptation at high latitudes globally through intercrossing materials originating from Asia and North America.     

Wind-splash erosion of bare peat on UK upland moorlands

Peat is a common land surface material in many countries of the world and is particularly important in upland regions of the UK. Peat landscapes represent an important land use for hill farming, water management, and shooting, and are a globally scarce resource. Wind is a fundamental characteristic of upland environments in the UK and has long been recognised as a significant factor in peat erosion. This paper presents the first results of a project that aims to determine the significance of wind action in the erosion of upland peat. Wind erosion monitoring is being undertaken at Moor House in the North Pennines on a 3-ha area of relatively flat, sparsely vegetated peat. Measurements using arrays of passive horizontal mass flux gauges (fixed orientation vertical slot gauges), together with a vertical array of mass flux samplers (directional), provide estimates of sediment flux. A micrometeorological station records local wind speed (four heights), wind direction, rainfall, soil moisture, and temperature conditions. For 1999 and 2000, the annual horizontal net erosion flux is 0.46 and 0.48 t ha⁻¹, respectively. Results of detailed monitoring over a 10-month period demonstrate that the peat sediment flux collected in windward- and leeward-oriented sediment traps on 10 separate occasions is between 3 and 12 times greater in the windward-facing traps. The concentration of peat with height decays rapidly and the majority of the peat is transported close to the ground surface. Above 0.3 m, very little peat is found. Significant horizontal fluxes of peat occur in both wet and dry periods. This is evaluated using the local micrometeorological data to try and predict sediment yields. Correlations among time-averaged friction velocity measurements, surface conditions, and sediment flux are complex. Event-based measurements, as opposed to cumulative sediment yields, are required to resolve this. These results quantify for the first time the significance of wind action in the erosion of peat in a UK upland environment.