Chloramphenicol sodium succinate in the horse: serum, synovial, peritoneal, and urine concentrations after single-dose intravenous administration

Six healthy adult mares were given a single IV dose (25 mg/kg of body weight) of chloramphenicol sodium succinate. Chloramphenicol concentrations in serum, synovial fluid, peritoneal fluid, and urine were measured serially over a 48-hour period. The highest measured serum chloramphenicol concentration was 6.21 micrograms/ml at 0.5 hour. Chloramphenicol was detected in synovial and peritoneal fluids, with mean peak concentrations of 3.89 micrograms/ml and 3.50 micrograms/ml, respectively, at 0.5 hour. Serum and synovial concentrations declined rapidly and were not measurable at 3 hours. Chloramphenicol could not be detected in peritoneal fluid at 6 hours. The serum half-life was 0.43 hour and the apparent volume of distribution was 2.83 L/kg. Urine concentrations of chloramphenicol peaked at 0.5 hour at 106.72 micrograms/ml and also declined rapidly. The drug could not be detected in the urine at 36 hours.     

Two-dimensional link-segment model of the forelimb of dogs at a walk

OBJECTIVE: To calculate normative joint angle, intersegmental forces, moment of force, and mechanical power at elbow, antebrachiocarpal, and metacarpophalangeal joints of dogs at a walk. ANIMALS: 6 clinically normal mixed-breed dogs. PROCEDURE: Kinetic data were collected via a force platform, and kinematic data were collected from forelimbs by use of 3-dimensional videography. Length, location of the center of mass, total mass, and mass moment of inertia about the center of mass were determined for each of 4 segments of the forelimb. Kinematic data and inertial properties were combined with vertical and craniocaudal ground reaction forces to calculate sagittal plane forces and moments across joints of interest throughout stance phase. Mechanical power was calculated as the product of net joint moment and the angular velocity. Joint angles were calculated directly from kinematic data. RESULTS: All joint intersegmental forces were similar to ground reaction forces, with a decrease in magnitude the more proximal the location of each joint. Flexor moments were observed at metacarpophalangeal and antebrachiocarpal joints, and extensor moments were observed at elbow and shoulder joints, which provided a net extensor support moment for the forelimb. Typical profiles of work existed for each joint. CONCLUSIONS AND CLINICAL RELEVANCE: For clinically normal dogs of a similar size at a walk, inverse dynamic calculation of intersegmental forces, moments of force, and mechanical power for forelimb joints yielded values of consistent patterns and magnitudes. These values may be used for comparison in evaluations of gait in other studies and in treatment of dogs with forelimb musculoskeletal disease.     

The effects of femoral stem and neck length on cement strains in a canine total hip replacement model

OBJECTIVE: To determine the effects of femoral prosthesis stem length and head size on cement strains in a canine hip replacement system. STUDY DESIGN: An in vitro experimental model. SAMPLE POPULATION: (1) Three standard and 3 1-cm shortened femoral implants with +3 femoral heads. (2) Two standard implants with +0, +3, and +6 femoral heads. METHODS: Femoral stems were embedded in polymethylmethacrylate cement. A uniaxial proximodistal-oriented strain gauge was applied to the cement on the medial and lateral aspects of the construct 1.5 cm, 6.0 cm and 7.0 cm distal to the collar. Each construct with a +3 femoral head was mounted in a materials testing system. An axial compressive load (0-200 N) was applied to the femoral head and cement strains were recorded. Additionally, 2 standard length constructs were also tested with +0 and +6 femoral heads. The effects of stem length and neck length on cement strains were assessed with analysis of variance. RESULTS: Strains increased at all locations with increasing loads for all constructs. Shorter implants had higher strains by 152% and 171%, lateral (P =.003) and medial (P =.0025) to the stem tip. No significant strain differences were noted, at any strain gauge location, between different neck lengths (P values ranged from.20 to.67). CONCLUSIONS: Although a shorter implant stem has a potential to improve implant fit, it led to significantly higher cement strains that may increase the risk for aseptic loosening. Changes in femoral neck length did not significantly affect cement strains under the conditions tested. CLINICAL RELEVANCE: Shortening of the femoral stem currently cannot be recommended in canine total hip replacement. The existing use of variable neck lengths likely does not increase the risk of failure of the femoral stem.     

In vitro biomechanical study of rotational stabilizers of the canine elbow joint

OBJECTIVE: To develop a model for measuring rotary stability of the canine elbow joint and to evaluate the relative contribution of the anconeal process (AN), lateral collateral ligament (LCL), and medial collateral ligament (MCL). SAMPLE POPULATION: 18 forelimbs from 12 canine cadavers. PROCEDURE: Forelimbs were allocated to 3 experimental groups (6 forelimbs/group). Each intact forelimb was placed in extension at an angle of 135 degrees and cycled 50 times from -16 degrees (pronation) to +28 degrees (supination) in a continuous manner at 2.0 Hz. Cycling was repeated following sectioning of the structure of interest (group 1, AN; group 2, LCL; and group 3, MCL). Torque at -12 degrees (pronation) and +18 degrees (supination) was measured for each intact and experimentally sectioned limb. A Student t test was performed to compare torque values obtained from intact verses experimentally sectioned limbs and for comparison with established criteria for differentiation of primary (> or = 33%), secondary (10 to 33%), and tertiary rotational stabilizers (< 10%). RESULTS: In pronation, the AN was the only primary stabilizer (65%). For supination, the LCL was a primary stabilizer (48%), AN was a secondary stabilizer (24%), and MCL was a tertiary stabilizer (7%). CONCLUSIONS AND CLINICAL RELEVANCE: With the elbow joint in extension at an angle of 135 degrees, the AN is a primary rotational stabilizer in pronation, and the LCL is a primary stabilizer in supination. Disruption of the AN or LCL may affect rotary range of motion or compromise stability of the elbow joint in dogs.     

Computed tomographic osteoabsorptiometry of the elbow joint in clinically normal dogs

OBJECTIVE: To evaluate subchondral bone density patterns in elbow joints of clinically normal dogs by use of computed tomographic (CT) osteoabsorptiometry. SAMPLE POPULATION: 20 cadaver forelimbs from 10 clinically normal dogs. PROCEDURE: Each elbow joint was imaged in parasagittal and transverse planes of 1.5-mm thickness. Slice data were converted to dipotassium phosphate equivalent density (PPED) values. Sagittal, parasagittal, and transverse medial coronoid process topographic maps were constructed. Defined zones were created for each of the 3 CT planes, and confluence and peak PPED values were determined. RESULTS: The lowest PPED value was 340 mg/ml (articular and subchondral confluence), and the highest was 1780 mg/ml (peak subchondral density). Detectable effects of joint laterality were not found in the confluence or peak PPED measurements or in the peak-to-confluence PPED ratio for all 3 CT planes. Significant differences were found among zones in all 3 planes for confluence and peak PPED measurements and between sagittal and transverse planes for peak-to-confluence PPED ratios. Subjectively, the pattern of density distribution among dogs was fairly consistent for the sagittal and parasagittal slices. Three specific patterns of density distribution were apparent on the transverse topographic maps of the medial coronoid process that corresponded to conformational differences. CONCLUSIONS AND CLINICAL RELEVANCE: The use of CT osteoabsorptiometry provides a repeatable technique that can be used to noninvasively examine bone density and the effects of stress acting on joints in vivo. Variability in density values for any of the CT planes was not identified among clinically normal dogs.     

A Biomechanical Comparison of Headless Tapered Variable Pitch and AO Cortical Bone Screws for Fixation of a Simulated Lateral Condylar Fracture in Equine Third Metacarpal Bones

OBJECTIVE: To compare drilling, tapping, and screw-insertion torque, force, and time for the 4.5-mm AO and 6.5-mm Acutrak Plus (AP) bone screws, and to compare the mechanical shear strength and stiffness of a simulated complete lateral condylar fracture of the equine third metacarpal bone (MC3) stabilized with either an AO or AP screw. STUDY DESIGN: In vitro biomechanical assessment of screw-insertion variables, and shear failure tests of a bone-screw-stabilized simulated lateral condylar fracture. SAMPLE POPULATION: Eight pairs of cadaveric equine MC3s METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials-testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Standardized simulated lateral condylar fractures were stabilized by either an AO or AP screw and tested in shear until failure. A paired t test was used to assess differences between screws, with significance set at P < .05. RESULTS: Insertion and mechanical shear testing variables were comparable for AO and AP insertion equipment and screws. CONCLUSION: The 6.5-mm tapered AP screw can be inserted in equine third metacarpal condyles and is mechanically comparable with the 4.5-mm AO screw for fixation of a simulated lateral condylar fracture. CLINICAL RELEVANCE: Considering the comparable mechanical behavior, the potential for less-persistent soft-tissue irritation with the headless design, and the ability to achieve interfragmentary compression by inserting the screw in one hole drilled perpendicular to the fracture plane, the 6.5-mm tapered AP screw may be an attractive alternative for repair of incomplete lateral condylar fractures in horses.     

Giant birefringent optics in multilayer polymer mirrors

Multilayer mirrors that maintain or increase their reflectivity with increasing incidence angle can be constructed using polymers that exhibit large birefringence in their indices of refraction. The most important feature of these multilayer interference stacks is the index difference in the thickness direction (z axis) relative to the in-plane directions of the film. This z-axis refractive index difference provides a variable that determines the existence and value of the Brewster's angle at layer interfaces, and it controls both the interfacial Fresnel reflection coefficient and the phase relations that determine the optics of multilayer stacks. These films can yield optical results that are difficult or impossible to achieve with conventional multilayer optical designs. The materials and processes necessary to fabricate such films are amenable to large-scale manufacturing.