Evaluation of finger weeder safety and efficacy for intra-row weed removal in irrigated field crops

Increased demand for pesticide-free food and the development of herbicide-resistant weed populations have created a need for non-chemical weed-control tools. A candidate mechanical tool for controlling weeds in the seeding line (intra-row zone) is the finger weeder. This study thus aimed to evaluate the safety and weed-control efficacy of the finger weeder in various irrigated field crops. Eight field trials were conducted in processing tomato, sweet corn, sunflower, cotton, and beetroot over 2 years. The finger weeder treatments were applied as the sole weed-control method (single or double treatments) and in combination with herbicides. A mini meta-analysis was used to evaluate the overall effect of the finger weeder treatments on crop stand and yield and on weed control efficacy. Weed density in the control not treated with herbicides nor a finger weeder ranged between 2 and 62 weeds m⁻². The finger weeder treatments resulted in a significant reduction in weed density, which ranged between 40% and 90%. The weed density following the double finger weeder treatment was not significantly different from that for the conventional herbicide-based treatment (p = 0.32) and could therefore be considered as an effective environmentally friendly alternative. Furthermore, a single FW treatment integrated with herbicide application gave better weed control than the conventional herbicide treatment (p = 0.04). This treatment was safe for the crops with no significant stand (p = 0.19) or yield (p = 0.29) reductions compared to commercial treatment. The results of this study demonstrate the promise of the finger weeder as an effective tool within integrated weed management systems for conventional agro-systems. The tool offers a rational weed-control solution for sustainable systems under irrigation.     

Coastal and interior Douglas-fir provenances differ in growth performance and response to drought episodes at adult age

Context

Since the 2003 drought and heat wave, Douglas-fir dieback has been reported in France in trees older than 30 years. Consequently, it is questioned whether selected Douglas-fir provenances are suited to the frequent and severe drought events which are forecast due to climate change.

Aims

Our objective was to contribute to the screening of variability in productivity and growth response to soil-water deficit of mature trees from provenances not currently used for plantation in France.

Methods

We sampled 22 provenances, including coastal and interior Douglas-fir, covering a wide part of its natural distribution, from Oregon to California for coastal provenances and from British Columbia to New Mexico for interior provenances. These provenances were planted at the mid 1970s in two provenance trials located in the south-west area of France. Variability of productivity, of wood density, and of radial growth in response to drought episodes among provenances was quantified and related to soil-water deficit computed by daily water balance calculations.

Results

Whatever the provenance, annual radial growth is highly dependent on local soil-water deficit (Felines R ² = 0.57, Le Treps R² = 0.49). Radial growth and wood properties exhibit large differences between provenances at 30 years old. Variability between provenances for all wood characteristics studied is mainly structured geographically. Coastal provenances perform best for productivity at 30 years old (619 cm²?±?59), and exhibit a small growth reduction in 2004, the second successive year of drought (?10.7 %?±?3.8). Surprisingly, the southern interior provenances from the driest environments in the natural range show a large growth reduction in 2004 (?30.5 %?±?5.2).

Conclusions

The provenances tested exhibited significant differences in growth performance and growth reduction induced by the soil-water deficit. The approach coupling retrospective analysis of radial growth on mature trees and water balance modelling is relevant for evaluating provenance adaptation to more frequent or severe drought episodes.     

Hop as an interesting source of resveratrol for brewers: optimization of the extraction and quantitative study by liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry

Nowadays, hop is used almost exclusively by brewers for bitterness and flavor. Although hop polyphenols have been widely studied in the past decade for their antioxidant activity in the boiling kettle, very little is known about their real impact on health. The discovery of resveratrol in hop pellets highlights the potential health-promoting effect of moderate beer consumption. Here, we have optimized a quantitative extraction procedure for resveratrol in hop pellets. Preliminary removal of hydrophobic bitter compounds with toluene and cyclohexane at room temperature allows 99% trans-resveratrol recovery by ethanol:water (75:25, v/v) solid/liquid extraction at 60 degrees C. Reverse phase liquid chromatography proves an excellent means of separating isomers. In addition, we have compared two mass spectrometry ionization methods-atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI)-in both the positive and the negative modes. On the basis of standard additions applied with the optimized extraction procedure and reverse phase high-performance liquid chromatography-APCI(+)-tandem mass spectrometry, it appears that Tomahawk hop pellets (T90, harvest 2002) contain 0.5 ppm trans-resveratrol, 2 ppm trans-piceid, no cis-resveratrol, and 0.9 ppm cis-piceid.     

A common near infrared—based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix?×?eurolepis

Wood density is defined as the ratio of mass to volume and therefore in principle it should be possible to calculate a unique partial least squares regression (PLS-R) model for several species. PLS-R models for wood density based on X-ray microdensity data were calculated for each species Pinus pinaster and Larix × eurolepis and for both species together. After cross-validation and test set validation the data sets were combined and final models were calculated. The common model gave a residual prediction deviation (RPD) of 3.1, a range error ratio (RER) of 11.7, and a SEP/SEC of 1.06. The single models for Pinus pinaster and Larix?×?eurolepis gave RPD’s of 3.5 and 3.2, RER’s of 13 and 11, and a SEP/SEC of 1.2. To the best knowledge of the authors all obtained PLS-R models are the first ones that fulfil the requirements according to AACC Method 39-00 (AACC in AACC Method, 39-00:15, 1999) to be used at least for screening (RPD?≥?2.5). Although this method and the defined limits were developed for the analysis of grains they can be used as a rough rule of thumb until limits for wood are available. The improvement of the PLS-R models, compared to published results, might be due to three facts (1) the higher number of scans collected for a single spectrum, (2) that the samples were better represented by the NIR spectra and X-ray microdensity values, and (3) that the sites for the measurement of NIR spectra and X-ray microdensity were coincided as strictly as possibly.     

Influence of cambial age and climate on ring width and wood density in Pinus radiata families

? Context

The correlation between tree ring width and density and short-term climate fluctuations may be a useful tool for predicting response of wood formation process to long-term climate change.

? Aims

This study examined these correlations for different radiata pine genotypes and aimed at detecting potential genotype by climate interactions.

? Methods

Four data sets comprising ring width and density of half- and full-sib radiata pine families were used. Correlations with climate variables were examined, after the extraction of the effect of cambial age.

? Results

Cambial age explained the highest proportion of the ring to ring variation in all variables. Calendar year and year by family interaction explained a smaller but significant proportion of the variation. Rainfall had a positive correlation with ring width and, depending on test site, either a negative or positive correlation with ring density. Correlations between temperature during growing season and ring density were generally negative.

? Conclusion

Climate variables that influence ring width and wood density can be identified from ring profiles, after removing the cambial age effect. Families can be selected that consistently show desirable response to climate features expected to become prevalent as a result of climate change.     

Variation of wood density and hydraulic properties of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) clones related to a heat and drought wave in France

Drought response of three Douglas-fir clones (slow, intermediate and fast growing) inhabiting two different climatic regimes in France was examined. We used the hydraulic conductivity and the percent loss of conductivity due to embolism from stems and branches as well as wood microdensity measurements to determine the role of genetics in the control of embolism in this species. Conductivity and tree-ring’s microdensity variables (ring width: RW, mean ring density: MRD, minimum ring density: MID and maximum ring density: MAD) were compared in growth rings in all three clones during a typical year (2002) vs. an extremely dry year (2003). A new method was developed in order to assess axial hydraulic specific conductivity (K_s) within tree rings. The results show that branches are more resistant to embolism than stems, and that there are significant differences in embolism resistance among the clones between the two sites. K_s varied between years, sites and clones but the site exerted the most significant effect. Lartimache (more humid site during 2003) trees showed substantially higher K_s than those inhabiting Chassenoix (strongly affected by the 2003 heat and drought wave site). Wood analysis showed a significant year effect for all ring variables and a significant clone effect for all ring variables except for MAD, while the site effect was significant for MRD and MAD. The existence of a genetic control for the study traits indicates that Douglas-fir populations introduced in France may have a selection potential to face extreme climate events like the 2003 heat and drought wave.     

Ring density record of phenotypic plasticity and adaptation to drought in Douglas-fir

Microdensity profiles of Douglas-fir's clones and weather data were used to study phenotypic plasticity (dendroplasticity). Within-ring microdensity was interpreted as the variation of tree response to drought constraints during selected growing seasons. An original norm of reaction was obtained by pairing evident points of abrupt changes in tree-ring microdensity profiles and in weather indices. The coefficients of the non-linear models adjusted to the reaction norms were analysed as dendroplasticity variables. Dendroplasticity variables were significantly different between geographical locations, years and clones. Heritability of the dendroplasticity variables ranged from low to high and was similar to heritability values of microdensity variables such as mean ring density (MRD). Coefficients of genetic variation of dendroplasticity variables were intermediate between those of wood density and growth variables. Dendroplasticity variables were phenotypically and genetically related to ring microdensity variables, more strongly to latewood variables. Dendroplasticity provides retrospective, synthetic and easy-to-interpret information about tree response to the variation of the balance between water availability and water demand during the growing season. The proposed model of dendroplasticity is described by a number of parameters that are linked to a biological meaning. Our results suggest that there is a potential for adaptation to drought in Douglas-fir, with two mechanisms involved: at individual level, short-term plastic response during the growing season and, at population level, long-term, between-generation, evolution process.     

Spelt (Triticum aestivum ssp. spelta) as a source of breadmaking flours and bran naturally enriched in oleic acid and minerals but not phytic acid

The nutritional value of breadmaking cereal spelt (Triticum aestivum ssp. spelta) is said to be higher than that of common wheat (Triticum aestivum ssp. vulgare), but this traditional view is not substantiated by scientific evidence. In an attempt to clarify this issue, wholemeal and milling fractions (sieved flour, fine bran, and coarse bran) from nine dehulled spelt and five soft winter wheat samples were compared with regard to their lipid, fatty acid, and mineral contents. In addition, tocopherol (a biochemical marker of germ) was measured in all wholemeals, whereas phytic acid and phosphorus levels were determined in fine bran and coarse bran samples after 1 month of storage. Results showed that, on average, spelt wholemeals and milling fractions were higher in lipids and unsaturated fatty acids as compared to wheat, whereas tocopherol content was lower in spelt, suggesting that the higher lipid content of spelt may not be related to a higher germ proportion. Although milling fractionation produced similar proportions of flour and brans in spelt and wheat, it was found that ash, copper, iron, zinc, magnesium, and phosphorus contents were higher in spelt samples, especially in aleurone-rich fine bran and in coarse bran. Even though phosphorus content was higher in spelt than in wheat brans, phytic acid content showed the opposite trend and was 40% lower in spelt versus wheat fine bran, which may suggest that spelt has either a higher endogenous phytase activity or a lower phytic acid content than wheat. The results of this study give important indications on the real nutritional value of spelt compared to wheat. Moreover, they show that the Ca/Fe ratio, combined with that of oleate/palmitate, provides a highly discriminating tool to authenticate spelt from wheat flours and to face the growing issue of spelt flour adulteration. Finally, they suggest that aleurone differences, the nature of which still needs to be investigated, may account for the differential nutrient composition of spelt and wheat.     

Requirement of JNK2 for scavenger receptor A-mediated foam cell formation in atherogenesis

In vitro studies suggest a role for c-Jun N-terminal kinases (JNKs) in proatherogenic cellular processes. We show that atherosclerosis-prone ApoE-/- mice simultaneously lacking JNK2 (ApoE-/- JNK2-/- mice), but not ApoE-/- JNK1-/- mice, developed less atherosclerosis than do ApoE-/- mice. Pharmacological inhibition of JNK activity efficiently reduced plaque formation. Macrophages lacking JNK2 displayed suppressed foam cell formation caused by defective uptake and degradation of modified lipoproteins and showed increased amounts of the modified lipoprotein-binding and -internalizing scavenger receptor A (SR-A), whose phosphorylation was markedly decreased. Macrophage-restricted deletion of JNK2 was sufficient to decrease atherogenesis. Thus, JNK2-dependent phosphorylation of SR-A promotes uptake of lipids in macrophages, thereby regulating foam cell formation, a critical step in atherogenesis.