A nonlinear 3D finite element analysis of the soil forces acting on a disk plow

This study aimed to compare predicted soil forces on a disk plow with measured forces within the tillage depth of clay (90 g kg⁻¹ sand, 210 g kg⁻¹ silt, 700 g kg⁻¹ clay) and sandy loam (770 g kg⁻¹ sand, 40 g kg⁻¹ silt, 190 g kg⁻¹ clay) soils. The model assumed the effects of both tilt angle and plowing speed. Two plowing speeds (4 and 10 km/h) at three tilt angles (15°, 20° and 25°) were compared and the draft, vertical, and side forces determined. A 3D nonlinear finite element model was used to predict the soil forces while a dynamometer was used to measure them on a disk plow in the field. An incremental method was used to deal with material nonlinearity and the Trapezoidal rule method was used to analyze the dynamic response of soil during tillage. Field tillage experiments were conducted to verify the results of the finite element model. It was found that increasing the tilt angle of the plow increased the draft and vertical forces and decreased the side force. Increasing plowing speed increased the draft and side forces and decreased the vertical force. Generally, the results from the finite element model were found to be compatible with the experimental results in clay soil, while in sandy loam the differences between predicted and measured data were probably due to problems of measuring soil mechanical characteristics in the triaxial test.     

Development of a forest certification standard compatible with PEFC and FSC's management requirements. A case study from Greece

Greece currently has no national forest certification standard.This paper explains how a draft forest management standard forGreece was developed to be compatible with both the Forest StewardshipCouncil and the Programme for the Endorsement of Forest Certificationschemes requirements. The draft standard was tested in two contrastingforest areas to investigate its ease of operation, to indicatenecessary refinements to the standard and to reveal major areasof weakness in current forest management practices. Field testingshowed that the standard was operationally efficient and thatrelatively few changes to the standard were necessary. Majorweaknesses in current management practices were identified asbreaches of health and safety, poor training of forest workersand inadequate consultation with stakeholders.     

Theoretical effect of wheel loads on subsoil stresses

This study highlights the previously expressed concerns of soil researchers who have indicated that compaction pressures or stresses in the deeper layers of soil are determined by the amount of surface load. Modifications of Boussinesq theory by Froelich and further modification of Froelich's equations by Soehne were used to predict and develop graphical relationships for maximum allowable loads and/or mean surface contact pressures beneath loaded farm machinery tyres. Vertical compressive stresses at different subsoil depths were calculated and design loads for a currently used high flotation tyre were examined for comparative purposes. For highly compactible soils the results indicate that mean surface contact pressures should not exceed maximum allowable stresses in the subsoil for individual wheel loads which exceed approximately 30 kN. Thus, it appears that future designs based upon limited ground contact pressures are essential. This will require limitations on vehicle wheel loads and the use of more tyres and axles on heavy equipment.     

Alpha-amylase/subtilisin Inhibitor Levels in Australian Barleys

An enzyme-linked immunosorbent assay (ELISA) was used to determine the bifunctional alpha-amylase/subtilisin inhibitor (BASI) content of barley grain from 11 cultivars grown in six diverse locations in Australia. The inhibitor ranged from 119 to 254 μg/g in 57 barley samples. Genotype had a significant (P<0·05) effect on BASI content but there was no effect due to environment. Total protein varied independently of BASI and was influenced by environment and genotype. BASI content was higher (P<0·05) in malting barley than in feed barley and was correlated positively (r=0·29;P<0·05) with alpha-amylase activity in corresponding malts. The ELISA used monoclonal and polyclonal antibodies raised against purified BASI. In immunoblot analysis the monoclonal antibody showed high specificity for the inhibitor in barley and also detected the inhibitor in wheat. Low levels of inhibitor (mean 3·2 μg/g) were found in 12 Australian wheat cultivars using the ELISA developed for barley. The assay had a linear working range of 5–50 ng/mL with a detection limit of 2 ng/mL. Reproducibility between assays was good (CV=4·9%) but mean recoveries were high, ranging from 116–129% when purified inhibitor was added to barley extracts. The ELISA may have useful applications in brewing research and barley breeding programmes.