PG99S智能型喷灌机的调试及维护

在蔬菜、花卉的工厂化育苗生产中,准确控制肥水的浓度和喷洒的均匀性显得尤为重要,而喷灌设备作为智能型连栋育苗温室的主要浇灌设备,被广泛应用于现代化育苗温室中。该设备自动作业,水量控制精准。本文就PG99S型智能喷灌机介绍其调试方法和故障维修。     

Intercropping of Corn with Soybean and Lupin for Silage: Effect of Seeding Date on Yield and Quality

Intercropping of corn with legumes is an alternative to corn monocropping and has a number of advantages, for example, lower levels of inputs, lower costs of production and better silage quality than the monocrop system. An experiment was carried out at two sites in 1993 and 1994 to investigate the effects of seeding date (simultaneous with corn or 3 weeks later) and number of rows of large‐seeded legumes (one or two) seeded between the corn rows. The intercrop plots received 90 kg ha^?1 less nitrogen fertilizer than the monocrop plots, which received 180 kg ha^?1. Silage yields were sometimes decreased by the simultaneous seeding of corn and large‐seeded legumes. Protein content and concentration were not affected by most treatments and provided reasonable quality silage, despite a reduction in the amount of nitrogen fertilizer used.     

施用竹炭对卷心菜叶绿素含量和荧光参数的影响

为探究人工施用竹炭对卷心菜叶绿素含量和荧光参数的影响,进而明确卷心菜的最适竹炭有机肥施用量,在田间试验条件下设置了无碳(CK)、中碳(MC)和高碳(SC)3个处理,对卷心菜莲座期和结球期的叶绿素含量及荧光参数进行测量研究.结果表明:(1)结球期的卷心菜叶绿素含量极显著高于莲座期(p0.01),且随着竹炭量的增加,两个时期的叶绿素含量变化趋势一致,从高到低依次为:MC,CK,SC.(2)结球期的卷心菜初始最小荧光Fo、初始最大荧光Fm、PSⅡ的最大光化学效率Fv/Fm,PSⅡ的潜在活性Fv/Fo、非光化学猝灭系数qN均低于莲座期,而PSⅡ实际光化学效率ΦPSⅡ、光化学猝灭系数qP高于莲座期,且随着竹炭量的增加,两个时期的这些参数均表现出一致的变化趋势,Fo和qN均呈"V"型变化,而Fm,Fv/Fm,Fv/Fo,ΦPSⅡ和qP均呈现倒"V"趋势,但对ΦPSⅡ和qP没有显著影响(p0.05).说明结球期的卷心菜光合作用高于莲座期;当竹炭量由CK增加到MC,有利于提高叶片叶绿素含量,增强光能利用率,减少植株热耗散,提高植株光合作用;但随着竹炭量进一步增加到SC,卷心菜叶片叶绿素含量降低,光能利用率减弱,热耗散增加,光合作用受到抑制,即中炭(MC)处理条件下,此卷心菜长势最优,表明中炭是该卷心菜生长的最适竹炭有机肥施用量.     

Leptin, GH, PRL, Insulin and Metabolic Parameters Throughout the Dry Period and Lactation in Dairy Cows

Leptin may play a role in the endocrine-metabolic processes that guarantee the physiological course of lactation in dairy cattle. This study was aimed at determining the changes in plasma concentrations of leptin and some of the main hormones and metabolites involved in the lactogenetic process in high-yielding dairy cows throughout lactation; we also wanted to assess whether leptin secretion is subjected to seasonal influences. Blood samples were collected from 23 Italian Friesian dairy cows from the end of a lactation to the ninth month of the subsequent one; in addition, blood was sampled from 47 dairy cows in different phases of lactation during February and July. Plasma concentrations of leptin, growth hormone (GH), insulin, prolactin (PRL), glucose, non-esterified fatty acids (NEFA) and urea were quantified by either validated radioimmunoassay (RIA) or enzymatic colorimetric methods. At the beginning of lactation, GH concentrations significantly increased, while a significant reduction occurred in leptin and insulin. This endocrine condition, such as the significant increase in NEFA plasma concentrations, is indicative of a marked lipid mobilization. In the more advanced stages of lactation, when both energy and protein balances become positive, leptin plasma concentrations increased, whereas GH and NEFA concentrations declined. During the summer months, a significant increase in leptin plasma concentrations, irrespective of the phase of lactation, was observed. Collectively, our findings suggest that, in dairy cows, leptin may represent a 'metabolic signal' of animal's status of fattening and nutritional level; in addition, leptin seems to be influenced by photoperiod and environmental temperature.     

Topical anaesthesia alleviates short-term pain of castration and tail docking in lambs

Objective To investigate the effect of a topical anaesthetic formulation on pain alleviation, wound healing and systemic levels of local anaesthetic actives in lambs undergoing castration and tail docking. Design Three placebo-controlled and/or randomised experiments were conducted using three groups of Merino lambs (n = 62, 68 and 19) undergoing routine castration and tail docking. Procedure Surgical castration, with either surgical or hot-iron tail docking, was performed with and without the application of topical anaesthetic (Tri-Solfen®) or placebo. The effects of this procedure were compared with those of rubber ring castration and tail docking, and of the handled but unmarked controls. Wound pain was assessed using calibrated Von-Frey monofilaments over a 4-h period, pain-related behaviour was assessed over 5 h, wound healing was assessed at 14 and 28 days, and the plasma levels of lignocaine and bupivacaine were determined. Results Rapid and up to 4 h primary hyperalgesia developed following surgical castration and tail docking in the untreated and placebo-treated lambs. It was absent in the castration wounds, and significantly reduced in the tail-docking wounds, of the treated lambs. Hot-iron docking was associated with mild and transient secondary hyperalgesia, which was abolished by the topical anaesthesia. There was a significant reduction in pain-related behaviours in treated lambs, which were not significantly different in their behaviour to the sham-operation handled controls. Plasma lignocaine and bupivacaine levels were below the toxic thresholds in all tested lambs. Conclusion Topical anaesthesia alleviates wound pain and significantly reduces pain-related behaviours in lambs undergoing surgical castration plus surgical or hot-iron tail docking, without a negative effect on wound healing or a risk of systemic toxicity.     

Chemical modification and wetting of medium density fibreboard panels produced from fibres treated with maleated polypropylene wax

Medium density fibreboard (MDF) was produced from fibres treated with maleated polypropylene wax. The objectives of this study were to investigate the effect of fibre treatment with maleated polypropylene wax on the advancing and receding contact angle and wicking of MDF panels by the Wilhelmy plate method; to verify the chemical reactions occurring between fibres and maleated polypropylene wax by infrared spectroscopy, and to verify if there are relationships with the water absorption of panels. Three maleated polypropylene wax contents (0, 3, 5%) and two resin types (urea–formaldehyde, UF and melamine–urea–formaldehyde, MUF) were considered in this study. Our results showed that the treatment increased the advancing contact angle of panels bonded with UF resin. The receding contact angles of MDF panels produced from treated fibres with 5% maleated polypropylene wax content were also increased by the treatment. Also, the wicking was reduced by the treatment independent of the maleated polypropylene wax content. Reductions of the wicking were 59% for panels bonded with UF resin and 73% for panels bonded with MUF. Relationships between the wicking and water absorption were observed. Chemical analysis realized by infrared spectroscopy did not detect the presence of an esterification reaction between wood fibres and anhydride groups of the maleated polypropylene wax. This suggests, therefore, that an esterification reaction did not take place or that chemical modifications were so small that they are not visible by infrared spectroscopy.     

Characterization of juvenile wood to mature wood transition age in black spruce (Picea mariana (Mill.) B.S.P.) at different stand densities and sampling heights

The radial pattern of both maximum ring density and ring area of 36 black spruce trees were used to determine the transition age from juvenile wood to mature wood. The data were obtained by X-ray densitometry and both segmented linear and polynomial regressions were used to point out the age of the juvenile wood boundary. Three stand densities (1,790, 2,700 and 3,400 stems/ha) and three sampling heights (2.4, 5.1 and 7.8 m) were studied. Although maximum ring density and ring area presented similar radial patterns, they gave two significantly different results of transition ages. The maximum ring density over-estimated the transition age (17.6 years) in contrast to ring area (14 years). The results show that the transition from juvenile wood to mature wood occurred after 12 years at 7.8 m (versus 13.1 years at a height of 5.1 m, and 17.6 years at 2.4 m). Although transition age occurred later in the high stand density group (21 years), the difference was not significant between the three stand density groups. Nevertheless, transition age remains difficult to determine since no standard definition exists. The transition occurs over years, and most probably a transition wood exists between juvenile wood and mature wood. Estimation of the juvenile wood proportion in volume shows that it remains constant along the stem and it increases with stand density.