Identification ofTomato Mottle Taino Begomovirus strains in Cuban potato fields

The presence of a begomovirus in potato plants with yellow mottle symptoms was determined for the first time in Cuba. The incidence of typical begomovirus-like symptoms in potato plants in some regions of Havana province (Güira de Melena, San José de las Lajas, Güines and Boyeros) during the growing seasons from 1992 to 1998 was in general low. However, in some cultivars belonging to the National Program for Potato Genetic Improvement, the incidence reached 100%. Yield losses, determined in 1992 and 1994, ranged as high as 19% to 56.33% depending on the cultivar. Characterization of the causal agent was done by light microscopy, host range (graft and mechanical transmission), DNA hybridizations, polymerase chain reaction, and restriction fragment length polymorphism analysis. Nucleotide sequence of the amplified fragments revealed the presence ofTomato mottle Taino virus. The virus was transmittedvia tubers and has been detected in mixed infections withPotato virus X and withPotato leaf roll virus. http://www.phytoparasitica.org posting Oct. 20, 2003. The first two authors contributed equally to this work.     

Genetics of equine bleeding disorders

Genetic bleeding disorders can have a profound impact on a horse's health and athletic career. As such, it is important to understand the mechanisms of these diseases and how they are diagnosed. These diseases include haemophilia A, von Willebrand disease, prekallikrein deficiency, Glanzmann's Thrombasthenia and Atypical Equine Thrombasthenia. Exercise-induced pulmonary haemorrhage also has a proposed genetic component. Genetic mutations have been identified for haemophilia A and Glanzmann's Thrombasthenia in the horse. Mutations are known for von Willebrand disease and prekallikrein deficiency in other species. In the absence of genetic tests, bleeding disorders are typically diagnosed by measuring platelet function, von Willebrand factor, and other coagulation protein levels and activities. For autosomal recessive diseases, genetic testing can prevent the breeding of two carriers.     

Use of dimethylformamide to cryopreserve alpaca semen previously incubated with collagenase

The objective of this study was to evaluate the effect of collagenase and two final dimethylformamide (DMF) concentrations (4% and 7%) on alpaca frozen-thawed sperm quality. A total of 25 ejaculates from 5 alpaca were obtained using electroejaculation. Each individual ejaculate was evaluated and then diluted 4:1 in a solution of 1 mg/ml collagenase in HEPES-TALP medium and incubated for 4 min at 37°C. Subsequently, samples were diluted in TRIS-fructose-citric acid-egg yolk and cooled to 5°C. Then, each sample was divided in two aliquots and DMF at final concentration of 4% or 7% was added, equilibrated for 1 hr at 5°C and frozen over liquid nitrogen vapours. A Kruskal–Wallis test was used to evaluate the sperm morphometry, and Completely Random Block designs were used to analyse sperm motility, viability, membrane function and acrosome status. After collagenase incubation, none of the samples showed thread formation, and sperm parameters were preserved. Non-progressive motile sperm were higher (p < .05) in equilibrated samples (4% DMF: 31.8 ± 8.3% and 7% DMF: 36.3 ± 11.8%) compared to raw (10.1 ± 4.3%) and frozen-thawed semen (4% DMF: 9.7 ± 1.8% and 7% DMF: 7.5 ± 3.2%). Sperm membrane function, membrane integrity and intact acrosomes were higher (p < .05) in raw semen (40.1 ± 12.2%, 94.6 ± 3.2% and 91.3 ± 8.1%) compared to frozen-thawed samples (4% DMF: 19.8 ± 4.7%, 53.2 ± 2.7%, 65.7 ± 8.7% and 7% DMF: 20.4 ± 4.5%, 54.1 ± 1.4%, 64.6 ± 9.1%). Length of the sperm head was lower in frozen-thawed samples, being statistically different with 4% DMF compared to pre-freezing samples. The ratio between acrosome and head areas was greater (p < .05) in frozen-thawed samples. Incubation of raw alpaca semen with collagenase decreased the thread formation without affecting sperm quality. Frozen of collagenase treated alpaca semen with 4% or 7% DMF did not preserve the sperm parameters in thawed samples.     

In vitro comparison of the effects of two forms of hydroxyethyl starch solutions on platelet function in dogs

OBJECTIVE: To evaluate the effect of 2 hydroxyethyl starch (HES) preparations (ie, HES solution with a molecular weight of 600 kd and a degree of substitution of 0.7 [HES 600/0.7] and a calcium-containing polyionic HES solution with a molecular weight of 670 kd and a degree of substitution of 0.75 [HES 670/0.75]) on canine platelet function. SAMPLE POPULATION: Blood samples from 10 healthy adult dogs. PROCEDURES: Dilution of citrated whole blood was performed with saline (0.9% NaCl) solution, HES 600/0.7, and HES 670/0.75 at ratios of 1:9 (ie, 1 part saline solution or colloid to 9 parts whole blood) and 1:3. Measurements of time to platelet plug formation in a capillary tube (ie, closure time) were made by use of a bench-top platelet function analyzer with collagen and ADP platelet agonists. RESULTS: Mean baseline closure time was 68.0 +/- 15.3 seconds. A 1:3 dilution of whole blood with saline solution, HES 600/0.7, and HES 670/0.75 resulted in mean closure times of 85.8 +/- 15.7 seconds, 100.6 +/- 18.6 seconds, and 101.6 +/- 16.2 seconds, respectively. Closure time following 1:3 dilution of whole blood with saline solution was significantly different from baseline and from 1:9 dilution with saline solution. Closure time following 1:3 dilution of whole blood with HES 670/0.75 was significantly different from baseline, 1:3 and 1:9 dilutions with saline solution, and 1:9 dilutions with HES 600/0.7 or HES 670/0.75. CONCLUSIONS AND CLINICAL RELEVANCE: Saline solution, HES 600/0.7, and HES 670/0.75 affect canine platelet function by prolonging closure times; HES solutions prolonged closure time to a greater extent than saline solution.     

Portable surface plasmon resonance immunosensor for the detection of fluoroquinolone antibiotic residues in milk

An inexpensive and portable surface plasmon resonance (SPR) sensor, SPReeta Evaluation Kit SPR3, has been used to develop a biosensor for the determination of fluoroquinolone antibiotics (FQs) and to demonstrate its performance analyzing FQ residues in milk samples. The SPReeta three-channel gold chips were activated with a mixed self-assembled monolayer (m-SAM) and functionalized with a FQ haptenized protein. Binding of the antibody produced a concentration-dependent increase of the SPR signal as a result of the change in the refraction index. Similarly, the presence of the FQ produced a dose-dependent decrease of the response, which allowed a good limit of detection (LOD) to be obtained (1.0 ± 0.4 μg L(-1) for enrofloxacin in buffer). The response was reproducible in all three channels, on different injections and days, and also between chips. Milk samples could be analyzed after a simple sample treatment involving fat removal by centrifugation and dilution with water. Under these conditions calibration curves were obtained showing that FQ residues can be analyzed in milk samples with an IC(50) value of 26.4 ± 7.2 μg L(-1) and a LOD of 2.0 ± 0.2 μg L(-1) (for enrofloxacin), far below the European Union regulations for this antibiotic family in this matrix. Finally, the paper also demonstrates that the biosensor is able to selectively detect the presence of FQs in milk samples, even in the presence of other antibiotics. Enrofloxacin, ciprofloxacin, and norfloxacin residues were detected in blind samples supplied by Nestle? Co.     

Evaluation of the sorption process for imidacloprid and diuron in eight agricultural soils from southern Europe using various kinetic models

Kinetic studies are of great concern for understanding the processes and parameters involved in the sorption of pollutants by soils. Sorption kinetics of imidacloprid and diuron in eight soils of different characteristics, with very low organic carbon content were investigated. Pseudosecond-order kinetic reactions closely correlate with the experimental kinetic (R(2) > 0.98) in all soils. The sorbed amount of diuron was higher than that for imidacloprid. The low OC content of these soils correlated neither with the sorbed amount nor with the kinetic parameters for both pesticides. Imidacloprid sorption was correlated with silt and sand content and cation exchange capacity (CEC); meanwhile for diuron, no correlation was found. Thus, sorption kinetics take place throughout different mechanisms related mainly to the chemical character of the pesticides. Sorption kinetic parameters determined using three of the four models selected (pseudosecond-order kinetic reactions, Elovich equation, and Weber-Morris models) have been shown to be worthy to distinguish the process controlling the sorption kinetic of both pesticides.     

Irrigation scheduling of plastic greenhouse vegetable crops based on historical weather data

Irrigation scheduling based on the daily historical crop evapotranspiration (ET_h) data was theoretically and experimentally assessed for the major soil-grown greenhouse horticultural crops on the Almería coast in order to improve irrigation efficiency. Overall, the simulated seasonal ET_h values for different crop cycles from 41 greenhouses were not significantly different from the corresponding values of real-time crop evapotranspiration (ET_c). Additionally, for the main greenhouse crops on the Almería coast, the simulated values of the maximum cumulative soil water deficit in each of the 15 consecutive growth cycles (1988–2002) were determined using simple soil-water balances comparing daily ET_h and ET_c values to schedule irrigation. In most cases, no soil-water deficits affecting greenhouse crop productivity were detected, but the few cases found led us to also assess experimentally the use of ET_h for irrigation scheduling of greenhouse horticultural crops. The response of five greenhouse crops to water applications scheduled with daily estimates of ET_h and ET_c was evaluated in a typical enarenado soil. In tomato, fruit yield did not differ statistically between irrigation treatments, but the spring green bean irrigated using the ET_h data presented lower yield than that irrigated using the ET_c data. In the remaining experiments, the irrigation-management method based on ET_h data was modified to consider the standard deviation of the inter-annual greenhouse reference ET. No differences between irrigation treatments were found for productivity of pepper, zucchini and melon crops.     

Use of stem diameter variations to detect plant water stress in tomato

The sensitivity of stem diameter variations (SDV) measured with linear variable transducer (LVDT) sensors as indicators of plant water status in tomato was evaluated. Two tomato crops were grown sequentially in a sandy loam soil in an unheated plastic greenhouse. These were an autumn–winter tomato crop (autumn crop) and a spring–summer tomato crop (spring crop). One drying cycle of 61 days was imposed to the autumn crop in winter at 92 days after transplanting (DAT). Two drying cycles, each of 29 days, were applied to the spring crop, to young (58 DAT) and mature plants (121 DAT). For each drying cycle, four replicate plots did not receive irrigation, and four were well watered. During each drying cycle, LVDT sensors continuously measured SDV, and daily measurements were made of leaf (Ψ _leaf) and stem water potential (Ψ _stem). SDV data was interpreted using the SDV-derived indices, maximum daily shrinkage (MDS) and stem growth rate (SGR). The response of SDV-derived indices to water deficit differed with (1) climatic conditions during stress imposition and (2) crop age. In the winter drying cycle of the autumn crop, the responses of the SDV-derived indices to soil drying were relatively small and slower than Ψ _leaf and Ψ _stem. Under warmer conditions, the SDV-derived indices were much more responsive to soil drying. In rapidly growing young plants, where SDV was characterized by high SGR and small MDS, SGR was the most sensitive SDV-derived index. In more mature plants with little stem growth, MDS was the most sensitive SDV-derived index. In mature plants grown in warm to hot conditions, MDS (1) responded at a similar time or earlier than Ψ _leaf and Ψ _stem and (2) had larger “signal” values (ratio of values from unwatered to control plants) than Ψ _leaf and Ψ _stem. However, there was appreciably more “noise” (coefficient of variation, CV) associated with the SDV-derived indices, giving lower “sensitivity” values, determined from “signal” to “noise” ratios, than for Ψ _leaf and Ψ _stem. Regression analysis between MDS of well-watered plants and climatic variables gave best results for a linear relationship between MDS and daily maximum vapor pressure deficit. There were strong linear relationships between MDS and Ψ _leaf for each drying cycle. The slopes of these relationships differed with crop age indicating that there was no constant relationship between MDS and Ψ _leaf for a whole season. Overall these results demonstrated that MDS and SGR can be sensitive indicators of the water status of tomato crops under conditions of moderate to high evaporative demand. However, the variability associated with the SDV-derived indices and the changing MDS–Ψ _leaf relationship with crop age represent major issues regarding the development of irrigation scheduling protocols for tomato.     

FDI in Space Revisited: The Role of Spillovers on Foreign Direct Investment within the European Union

We estimate a spatial econometric interaction model for bilateral aggregate FDI stock data between 25 European Union member countries in 2010. We find evidence for spatial spillovers of foreign direct investment for three different types of spatial dependence. Our results document FDI spillovers between neighboring countries of FDI origin countries, neighboring countries of FDI destination countries as well as between neighboring countries of both FDI origin and destination countries. Relying on recently developed methods, we provide the first model‐consistent interpretation of marginal effects of market size (measured by GDP) as well as GDP per capita on bilateral FDI activity. Our research highlights the importance of taking into account spatial lags when estimating bilateral FDI gravity models.