Effects of dietary phosphorus level on non-faecal phosphorus excretion from yellowtail (Seriola quinqueradiata Temminck & Schlegel) fed purified and practical diets

Non-faecal phosphorus (P) was determined for large yellowtail to estimate a minimum available P requirement (Experiment  1) and to justify inorganic P supplementation in a fish meal-based diet (Experiment 2). In Experiment 1, purified diets with incremental P concentrations were fed to yellowtail (mean weight 917 g) at a feeding rate of 1.5% of body weight. The peaks of non-faecal P excretion appeared 5–6 h after feeding in fish fed more than 4.5 g available P kg⁻¹ dry diet. Broken-line analysis indicated that the minimum available P requirement was 4.4 g kg⁻¹ dry diet. In Experiment 2, a purified diet (PR) containing 6.5 g available P kg⁻¹ and a fish meal-based diet with (F1) and without (F0) additional phosphorus were fed to yellowtail (mean weight 1.1 kg) at 1.5% (PR) and 2% (F0 and F1) feeding rates respectively. There was no significant difference in P excretion between fish fed the F0 (5.5 g soluble P kg⁻¹ dry diet) and the PR diet. However, significantly higher (34.5%) amounts of non-faecal P excretions (7.4 g soluble P kg⁻¹ dry diet) were found in fish fed F1 compared with the F0 diet. This suggested that there was an excess of dietary P in the F1 diet and that supplementation is not needed in fish meal-based diets for large yellowtail.     

Studies on the nitrification in soil,with special reference to the population of nitrifier

A number of papers have been published on nitrification in soil. The problem of the nitrification has become increasingly important because of the appearance of new forms of nitrogenous fertilizers such as ammonium chloride or urea, etc.     

Characterization of the morphological,physical, and mechanical properties of seven nonwood plant fiber bundles

The morphological, physical, and mechanical properties of the nonwood plant fiber bundles of ramie, pineapple, sansevieria, kenaf, abaca, sisal, and coconut fiber bundles were investigated. All fibers except those of coconut fiber had noncircular cross-sectional shapes. The crosssectional area of the fiber bundles was evaluated by an improved method using scanning electron microscope images. The coefficient factor defined as the ratio of the cross-sectional area determined by diameter measurement, to the cross-sectional area determined by image analysis was between 0.92 and 0.96 for all fibers. This indicated that the area determined by diameter measurement was available. The densities of the fiber bundles decreased with increasing diameters. The diameters of each fiber species had small variation of around 3.4%-9.8% within a specimen. The tensile strength and Young’s modulus of ramie, pineapple, and sansevieria fiber bundles showed excellent values in comparison with the other fibers. The tensile strength and Young’s modulus showed a decreasing trend with increasing diameter of fiber bundles.     

Genetic studies for breeding of rice cultivars with superior grain appearance and lodging resistance from the rice cultivar ‘Emi-no-kizuna’

ABSTRACT

We conducted a quantitative trait locus (QTL) analysis of grain appearance (GA) and agronomic traits of rice, using 128 recombinant inbred lines derived from ‘Emi-no-kizuna’ and ‘Tomohonami’. We detected two promising QTLs associated with GA: qGA4 on chromosome 4 and qGA8 on chromosome 8. qGA4 contributed highly to the greater percentage of perfect grains of the Emi-no-kizuna genotype. In the same region, we detected other QTLs associated with panicle number and spikelet number per panicle. In near-isogenic lines (NILs) in which Emi-no-kizuna alleles were introgressed in the genomic region of only the semi-dwarf 1 (sd1) locus (NIL_1) and both the sd1 locus and qGA8 (NIL_2), respectively, the percentage of perfect grains was significantly higher and the percentages of milky white, basal white, and white back grains were significantly lower than in Tomohonami; and the percentages of milky white and white back grains of NIL_2 were significantly lower than those of NIL_1. These results suggest that introgression in the sd1 region could improve GA, and that the addition of qGA8 could further improve GA. The culm lengths of the NILs were significantly shorter than that of Tomohonami, indicating improved lodging resistance. Grain weight of NIL_2 was significantly smaller than that of NIL_1, suggesting that the effect of qGA8 could be pleiotropic, or the gene that underlies qGA8 could be linked with genes associated with grain weight.

Abbreviations: ANOVA: analysis of variance; AT20: mean air temperature in the 20 days after heading; BW: basal white grain; CL: culm length; DAH: days after heading; GA: grain appearance; GW: 1000-grain weight; LOD: logarithm of odds; MW: milky white grain; NIL: near-isogenic line; PG: perfect grain; PL: panicle length; PN: panicle number; PTSN: putative total spikelet number; PVE: percentage of phenotypic variation explained; QTL: quantitative trait locus; RIL: recombinant inbred line; SN: spikelet number per panicle; SNP: single nucleotide polymorphism; WB: white back grain     

Low water exchange Gracilariopsis bailiniae Zhang & B.M. Xia culture in intensive milkfish culture effluents: effects of seaweed density on seaweed production and effluent treatment

This study tested the feasibility of a low-cost seaweed biofiltration system for pond-based aquaculture through an indoor-integrated fish-seaweed culture experiment using weekly nutrient supply regime and different seaweed stocking densities. The culture experiment was conducted in glass aquaria that were stocked with Gracilariopsis bailiniae at 3 densities (low = 0.5 kg m^?2, middle = 2 kg m^?2 and high = 3.5 kg m^?2) and provided either with effluents from intensive milkfish (Chanos chanos) culture or with effluent-free seawater (control) as nutrient source. Stocking density was used as a factor in optimizing nutrient availability for growth and nutrient removal under such low water exchange conditions. Our results showed that G. bailiniae cultivated in milkfish effluents had higher growth, biomass and nitrogen yields than those cultivated in effluent-free seawater. Among the different stocking densities tested, highest growth rate (1.03 % day^?1) was obtained in the middle density. Increasing biomass and nitrogen yields were also obtained at this density until the end of the culture period. Poorer growth rates at low and high stocking densities were attributed to light limitation from phytoplankton and self-shading, respectively. Due to seaweed treatment, average outflow concentration of NH₄ ⁺ was reduced from half of its pretreated level. This study showed that a weekly effluent supply at 2 kg m^?2 seaweed stocking density can sustainably support the growth of G. bailiniae as long as the dissolved nutrients are present at high levels.     

Formation of the density profile and its effects on the properties of fiberboard

Two main types of fiberboards were produced using lauan (Shorea spp.) fibers with an isocyanate resin as the binder; fiberboard with a flat, homogeneous (homoprofile), and typical U-shaped (conventional) density profile along the board thickness. The processing parameters included manipulation of mat moisture content distribution, press closing speed, and hot pressing method. The results are summarized as follows: (1) A larger variation was observed in the peak density (PD) and core density (CD) of fiberboards at 0.5g/cm³ mean density (MD) level than in those at 0.7 g/cm³. Generally, PD showed a greater variation than CD, irrespective of MD level. (2) Boards produced using two-step hot pressing recorded substantially higher PD with reduced CD. (3) Multiple regression analysis showed that CD and PD could be calculated based on the other profile defining factors, and a rough estimation for peak distance and gradient factor was possible. (4) Based on static bending, conventional fiberboard had a higher modulus of rupture (MOR) than the homo-profile board but a similar modulus of elasticity (MOE). (5) At 0.5 g/cm³ the MOR and dynamic MOE of fiberboard increased by up to 67% and 62%, respectively, when the PD increased from 0.5 to 1.07 g/cm³. Similarly, an increase of PD from 0.7 to 1.1 g/cm³ resulted in corresponding increases of 55% and 34% in the MOR and dynamic MOE of 0.7 g/cm³ boards. (6) The internal bond strength and screw withdrawal resistance were almost entirely dependent on the CD and MD, respectively. (7) Homo-profile fiberboards registered higher thickness swelling and water absorption than conventional fiberboards throughout the dry/wet conditioning cycle.     

Evaluation of the fire endurance of mechanically graded timber in bending

AbstractThis study examined the performance of mechanically graded timber in bending when exposed to fire at various load ratios. The test specimens were 150 pieces, each with the dimensions of 60 × 120 × 3500mm. The modulus of elasticity (MOE) of 150 specimens was measured, and 60 among them were selected to formulate the prediction equation for MOE and modulus of rupture (MOR), which was used to predict the remaining 90 specimens. These were tested under fire exposure in bending using three-point loading at 11.1%, 16.7%, 33.3%, 66.7%, and 83.3% of the ultimate load. Using mechanically graded timber, which means acknowledging the actual strength of the bending member, permits fairly precise application to the targeted design load. This research confirmed that mechanically graded timber under fire exposure has the following tendencies: under the same load ratio, time to failure is independent of strength class, and, at any load ratio, the critical strength is dependent on the timber strength class. The obtained design bending strength under fire exposure using the reduced cross section method and the reduced strength method conformed to those calculated based on Eurocode 5. Following those findings, mechanically graded timber can be applied to obtain the design bending strength when taking into account the fire attack.     

Removal of trichloroethylene from aqueous solution by pyrolyzed Japanese cedar bark

The bark of Japanese cedar (Cryptomeria japonica D. Don) was heated in an N₂ atmosphere at 300–900C for 3h to investigate the surface properties of the pyrolyzed residuces and their ability to remove trichloroethylene (TCE) from aqueous solutions. The specific surface areas (S _N) and total pore volumes (V _N) of the pyrolyzed barks steadily increased with rising pyrolysis temperature; no significant differences in the average pore diameters (D _N) were observed at higher temperatures (600–900C). The adsorption capacities of the pyrolyzed residues for TCE were determined under batch mode conditions using an aqueous solution containing 500g TCE dm^–3. The adsorption data were well fitted to the Freundlich equation. The adsorption capacity of the bark pyrolyzed at 900C was about five times larger than that of commercial activated carbon.This study was presented at the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, June 1999     

Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes

We investigated the effects of high-temperature drying schedules (120°–130°C) on decay and termite feeding of Japanese larch timbers. Thermogravimetric analysis was conducted to investigate changes of the wood components. Decay and termite feeding tests showed that specimens dried under high-temperature schedules were susceptible against a decaying fungus Fomitopsis palustris and attacks from termites Coptotermes formosanus and Reticulitermes speratus. These drying schedules changed chemical components, which were suggested by the thermal analytical result compared to the control sample. The results of this study indicated that the acceleration of termite feeding takes place even under temperatures that are comparatively lower than that used in our previous research in which 170°C steaming treatment was applied to Japanese larch wood. Decay durability against a brown rot fungus also decreased, possibly from production of low molecular weight fragments when hemicellulose decreased during the high-temperature drying processes.     

Chicken peripheral blood CD3+CD4-CD8- cells are regulated by endocrine and nerve systems

The existence of CD3(+)CD4(-)CD8(-) T cells in thymus and spleen has already been known. However, because of the presence of large amounts of thrombocytes in peripheral blood (PB), the proportion of CD3(+)CD4(-)CD8(-) T cells in PB has yet to be investigated. Therefore, the proportion of peripheral T cell-subsets was investigated in 6-week-old chickens. The percentage of CD3(+) cells, CD4(+) cells, CD8 alpha(+) cells, CD8 beta(+), and CD3(+)CD4(-)CD8(-) cells was 76%, 41%, 14%, 5%, and 15%, respectively. The proportion of CD3(+)CD4(-)CD8(-) cells in PB increased during egg-laying periods and in chickens treated with an analog of estrogen, while it decreased with age and in response to restraint stress. All of the CD3(+)CD4(-)CD8(-) cells expressed TCR1, and did not have NK activity. CD3(+)CD4(-)CD8(-) cells represent about 60% of peripheral TCR1(+) cells. These findings indicate that the proportion of CD3(+)CD4(-)CD8(-) cells is regulated by the endocrine and nerve systems.