Effects of dietary phosphorus level on non-faecal phosphorus excretion from yellowtail (Seriola quinqueradiata Temminck & Schlegel) fed purified and practical diets

Non-faecal phosphorus (P) was determined for large yellowtail to estimate a minimum available P requirement (Experiment  1) and to justify inorganic P supplementation in a fish meal-based diet (Experiment 2). In Experiment 1, purified diets with incremental P concentrations were fed to yellowtail (mean weight 917 g) at a feeding rate of 1.5% of body weight. The peaks of non-faecal P excretion appeared 5–6 h after feeding in fish fed more than 4.5 g available P kg⁻¹ dry diet. Broken-line analysis indicated that the minimum available P requirement was 4.4 g kg⁻¹ dry diet. In Experiment 2, a purified diet (PR) containing 6.5 g available P kg⁻¹ and a fish meal-based diet with (F1) and without (F0) additional phosphorus were fed to yellowtail (mean weight 1.1 kg) at 1.5% (PR) and 2% (F0 and F1) feeding rates respectively. There was no significant difference in P excretion between fish fed the F0 (5.5 g soluble P kg⁻¹ dry diet) and the PR diet. However, significantly higher (34.5%) amounts of non-faecal P excretions (7.4 g soluble P kg⁻¹ dry diet) were found in fish fed F1 compared with the F0 diet. This suggested that there was an excess of dietary P in the F1 diet and that supplementation is not needed in fish meal-based diets for large yellowtail.     

Characterization of the morphological,physical, and mechanical properties of seven nonwood plant fiber bundles

The morphological, physical, and mechanical properties of the nonwood plant fiber bundles of ramie, pineapple, sansevieria, kenaf, abaca, sisal, and coconut fiber bundles were investigated. All fibers except those of coconut fiber had noncircular cross-sectional shapes. The crosssectional area of the fiber bundles was evaluated by an improved method using scanning electron microscope images. The coefficient factor defined as the ratio of the cross-sectional area determined by diameter measurement, to the cross-sectional area determined by image analysis was between 0.92 and 0.96 for all fibers. This indicated that the area determined by diameter measurement was available. The densities of the fiber bundles decreased with increasing diameters. The diameters of each fiber species had small variation of around 3.4%-9.8% within a specimen. The tensile strength and Young’s modulus of ramie, pineapple, and sansevieria fiber bundles showed excellent values in comparison with the other fibers. The tensile strength and Young’s modulus showed a decreasing trend with increasing diameter of fiber bundles.     

Low water exchange Gracilariopsis bailiniae Zhang & B.M. Xia culture in intensive milkfish culture effluents: effects of seaweed density on seaweed production and effluent treatment

This study tested the feasibility of a low-cost seaweed biofiltration system for pond-based aquaculture through an indoor-integrated fish-seaweed culture experiment using weekly nutrient supply regime and different seaweed stocking densities. The culture experiment was conducted in glass aquaria that were stocked with Gracilariopsis bailiniae at 3 densities (low = 0.5 kg m^?2, middle = 2 kg m^?2 and high = 3.5 kg m^?2) and provided either with effluents from intensive milkfish (Chanos chanos) culture or with effluent-free seawater (control) as nutrient source. Stocking density was used as a factor in optimizing nutrient availability for growth and nutrient removal under such low water exchange conditions. Our results showed that G. bailiniae cultivated in milkfish effluents had higher growth, biomass and nitrogen yields than those cultivated in effluent-free seawater. Among the different stocking densities tested, highest growth rate (1.03 % day^?1) was obtained in the middle density. Increasing biomass and nitrogen yields were also obtained at this density until the end of the culture period. Poorer growth rates at low and high stocking densities were attributed to light limitation from phytoplankton and self-shading, respectively. Due to seaweed treatment, average outflow concentration of NH₄ ⁺ was reduced from half of its pretreated level. This study showed that a weekly effluent supply at 2 kg m^?2 seaweed stocking density can sustainably support the growth of G. bailiniae as long as the dissolved nutrients are present at high levels.     

Genetic studies for breeding of rice cultivars with superior grain appearance and lodging resistance from the rice cultivar ‘Emi-no-kizuna’

ABSTRACT

We conducted a quantitative trait locus (QTL) analysis of grain appearance (GA) and agronomic traits of rice, using 128 recombinant inbred lines derived from ‘Emi-no-kizuna’ and ‘Tomohonami’. We detected two promising QTLs associated with GA: qGA4 on chromosome 4 and qGA8 on chromosome 8. qGA4 contributed highly to the greater percentage of perfect grains of the Emi-no-kizuna genotype. In the same region, we detected other QTLs associated with panicle number and spikelet number per panicle. In near-isogenic lines (NILs) in which Emi-no-kizuna alleles were introgressed in the genomic region of only the semi-dwarf 1 (sd1) locus (NIL_1) and both the sd1 locus and qGA8 (NIL_2), respectively, the percentage of perfect grains was significantly higher and the percentages of milky white, basal white, and white back grains were significantly lower than in Tomohonami; and the percentages of milky white and white back grains of NIL_2 were significantly lower than those of NIL_1. These results suggest that introgression in the sd1 region could improve GA, and that the addition of qGA8 could further improve GA. The culm lengths of the NILs were significantly shorter than that of Tomohonami, indicating improved lodging resistance. Grain weight of NIL_2 was significantly smaller than that of NIL_1, suggesting that the effect of qGA8 could be pleiotropic, or the gene that underlies qGA8 could be linked with genes associated with grain weight.

Abbreviations: ANOVA: analysis of variance; AT20: mean air temperature in the 20 days after heading; BW: basal white grain; CL: culm length; DAH: days after heading; GA: grain appearance; GW: 1000-grain weight; LOD: logarithm of odds; MW: milky white grain; NIL: near-isogenic line; PG: perfect grain; PL: panicle length; PN: panicle number; PTSN: putative total spikelet number; PVE: percentage of phenotypic variation explained; QTL: quantitative trait locus; RIL: recombinant inbred line; SN: spikelet number per panicle; SNP: single nucleotide polymorphism; WB: white back grain     

Supplementation effect(s) of organic acids and/or lipid to plant protein‐based diets on juvenile yellowtail,Seriola quinqueradiata Temminck et Schlegel 1845, growth and,nitrogen and phosphorus excretion

A feeding experiment was conducted to investigate the effect of organic acids and/or lipid supplementation on growth, utilization and environmental loading of nitrogen (N) and phosphorus (P) in juvenile yellowtail fed fishmeal (FM) and plant protein (PP) diets. Six diets as FM (FM‐based), FM+P (FM with inorganic P), FM+L (FM with lipid), PP+CA (PP with citric acid), PP+L+CA (PP with lipid and citric acid) and PP+L+FA (PP with formic acid) were formulated. Yellowtails were fed each of the diets in duplicate groups; once a day, 6 days a week to near satiation at water temperature 19.0–25.0 °C for 16 weeks. Fishmeal with inorganic P gave the best growth while PP+L+FA the lowest. However, growth increased in PP+CA and PP+L+CA. Addition of lipid significantly increased N and P retention resulting in significant reduction in N and P excretion. Citric acid and FA supplementation to PP diets also increased retention of P; hence, its excretion was lowered. Thus, CA, FA and lipid in juvenile yellowtail diets can help to partially replace FM with PP sources and reduce inorganic P use to minimize environmental loading from aquafeeds.     

Flow cytometric analysis of chicken NK activity and its use on the effect of restraint stress

Immune system is organized by the influence of both neural and endocrine systems. NK activity plays an important role in the innate immunity. In this study, we observed the effects of restraint stress on chicken peripheral blood NK activity. Viability of FITC-labeled RP9 was measured with PI after treatment with the effector cells. Chicken peripheral blood CD8alpha+ cells expressed strong cytotoxic activity, in contrast to thrombocytes, while peripheral blood CD3+ CD8alpha+ cells and CD4+ cells had little cytotoxic activity. Con A supernatant enhanced the cytotoxic activity of CD8alpha+ cells. Therefore, it is considered that these cytotoxic activities measured by flow cytometry (FCM) analysis are NK activity. When chickens were exposed to restraint stress, the levels of serum corticosterone increased transiently over a short period of time while the NK activity decreased. The decreased NK activity, however, did not recover to the intact levels for a long time, even once the serum corticosterone levels had recovered. These data indicate that chicken NK activity is able to be measured by flow cytometric analysis and that restraint stress causes severe damage to the chicken NK activity.     

Evaluation of intestinal intramucosal pH,arterial and portal venous blood gas values,and intestinal blood flow during small intestinal ischemia and reperfusion in dogs

OBJECTIVES: To determine whether small intestinal ischemia and reperfusion affects intestinal intramucosal pH (pHi), arterial and portal venous blood gas values, and intestinal blood flow (IBF) and to investigate relationships between regional intestinal tissue oxygenation and systemic variables in dogs. ANIMALS: 15 healthy adult Beagles. PROCEDURE: Occlusion of superior mesenteric artery (SMA) for 0, 30, or 60 minutes, followed by reperfusion for 180 minutes, was performed; IBF, pHi, arterial and portal venous blood gas values, arterial pressure, and heart rate were measured at various time points; and intestinal mucosal injury was histologically graded. RESULTS: Occlusion of the SMA induced significant decreases in pHi and IBF. After the release of the occlusion, IBF returned rapidly to baseline values, but improvement in pHi was slow. Arterial and portal venous blood gas analyses were less sensitive than tonometric measurements of pHi, and there was no correlation between results of blood gas analyses and tonometric measurements. Histologic score for intestinal mucosal injury increased significantly, depending on duration of ischemia, and there was a correlation between tonometric results and the histologic score. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that it is difficult to accurately evaluate local oxygenation disorders by monitoring at the systemic level, whereas clinically pHi is the only reliable indicator of inadequate regional intestinal tissue oxygenation in dogs.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.