Biology and life table of Diaeretiella rapae against Brevicoryne brassicae on different cultivars of cauliflower

Phytoparasitica - Diaeretiella rapae (McIntosh) (Hymenoptera: Braconidae) is one of the most promising, effective and a common endoparasitoid of different aphid species including cabbage aphid,...     

Real-time adaptive irrigation scheduling under a limited water supply

The problem of real-time irrigation scheduling under limited water supply is considered. The goal is to develop an irrigation operation policy which maximizes crop yields and is responsive to current season changes in weather and other variables. Because irrigation decisions are sequential and dependent on crop and soil water status, and also because crop yields can only be known at the end of the season, the decisions are arrived at by a two-stage process. In the first or the design stage, irrigations are planned for the entire season at weekly intervals using historical data and an optimal irrigation scheduling model. In the second stage, the decisions for the subsequent weeks are revised each week after updating the status of the system with real time data up to that week and solving the irrigation optimization model once again for the new conditions. Thus, each week an irrigation decision is made, the entire planning horizon is kept in view. The procedure is illustrated by application to a case study.     

Agronomic fortification of rice grains with secondary and micronutrients under differing crop management and soil moisture regimes in the north Indian Plains

Although the System of Rice Intensification (SRI) has been reported to produce higher paddy (Oryza sativa L.) yields with better-quality grains, little research has addressed the latter claim. This study investigated the interactive effects of rice cultivation methods with different irrigation schedules and plant density on the uptake and concentration of sulfur (S), zinc (Zn), iron (Fe), manganese (Mn) and copper (Cu) in the grain and straw of two rice cultivars during two rainy seasons in the northern plains of India. As the two seasons differed in amounts of rainfall, there were impacts of soil moisture differences on nutrient uptake. Plots with SRI cultivation methods enhanced the grain uptake and concentrations of S, Zn, Fe, Mn and Cu by 36, 32, 28, 32 and 63%, respectively, compared to conventional transplanting (CT). Under SRI management, the highest concentrations of S, Zn and Cu in the grain and straw occurred with irrigation intervals scheduled at 3 days after disappearance of ponded water (DADPW; 3_D), whereas Fe and Mn concentrations in the grain and straw were higher with irrigation at 1 DADPW (1 _D ) compared with plots under 3 _D or 5 DADPW (5 _D ). The higher nutrient uptakes were also manifested in higher grain yield in 1 _D and 3 _D plots (by 9 and 6%, respectively) compared with 5 _D . Wider spacing (25 × 25 cm) compared with closer spacing (20 × 20 cm) significantly increased yield and the uptake and concentrations of all the said nutrients in the grains. When comparing the performance of two cultivars, the total uptakes of Zn, Fe, Mn and Cu in both grain and straw were significantly more in Hybrid 6444 than the improved variety Pant Dhan 4. Overall, SRI crop management compared to CT practices led to more biological fortification of rice grains with respect to S and the four micronutrients studied, giving a concomitant yield advantage of about 17% on average in this region.     

Response of American sycamore seedlings to maleic hydrazide and sodium chloride

American sycamore (Platanus occidentals L.) seedlings grown in a hydroponics system were treated with a growth regulator, maleic hydrazide (MH) or sodium chloride, or a combination of the two. Application of maleic hydrazide or sodium chloride retarded plant growth, but combined application did not show significant interaction effects. Treatment with both sodium chloride and MH reduced the dry weight of plant tissue to a greater extent than sodium chloride application alone. Elemental analyses of various plant parts revealed that MH was generally without effect on the level of either sodium or chloride ions. In old stem tissue, however, treatment with MH had no effect in the absence of sodium chloride but was associated with lower chloride content in its presence.     

Composite wound dressing for drug release

Present study is focused on the preparation of two layers composite wound dressing for drug release. The outer layer is made of hydrogel which contains of drug and the core layer is made of fabric. The two layers structure of composite dressing is formed by grafting of polyacrylamide-co-acrylic acid hydrogel on cotton fabric using ammonium per sulphate (APS) as chemical initiator and polyethylene glycol (PEG) as crosslinker. The major factors affecting graft copolymerization of hydrogel on cotton fabric are optimized by varying concentration of monomers & initiator, reaction temperature and addition time of crosslinker. Maximum grafting of hydrogel is obtained at 5 % (w/v) APS and 15 % acrylamide/acrylic acid (1:1 w/w ratio) concentration. The FTIR spectra of composite dressing shows characteristics peak of acrylic acid and acrylamide. The composite wound dressing material is loaded with model drug bovine serum albumin (BSA) and drug release behaviour is studied at different pH. The dressing shows drug release in different pH with maximum release of drug in acidic medium.     

Genetic analysis of a CSR10 (indica) × Taraori Basmati F3 population segregating for salt tolerance using ISSR markers

Segregation for salinity tolerance and ISSR markers based molecular polymorphism were investigated in a F₃ plant population raised via single-seed descent method from a cross between salt-tolerant indica rice variety CSR10 and salt-susceptible premium traditional Basmati rice variety Taraori Basmati HBC19. A total of 130 F₃plants were evaluated individually for salinity tolerance on 1–9 scale on the basis of seedling growth parameters; the average score ranged between 1.7 to 8.3. Frequency distribution curve obtained using the salinity tolerance data of F₃ population and a chi-square analysis, showed a good fit to a normal distribution. Eleven plants each in the category of salt-tolerant and salt-susceptible were selected from the segregating F₃ population for ISSR marker analysis. A total of 149 bands (4–11 bands per primer) ranging from 200 to 3530 bp were scored for the two rice varieties and the selected CSR10 × HBC19 segregating F₃ plants using 26 ISSR primers. Of these, 89 were monomorphic and 60 were polymorphic. Of the 60 polymorphic bands,36 and 20 bands were specific to CSR10 andHBC19 respectively. The remaining four bands were amplified using UBC primers 810,848, 853 and 886 and present in only some of the CSR10 × HBC19 F₃ plants. Notably, ISSR primers with dinucleotide repeat motif and 5'-anchored end amplified more number of bands (7.0 bands/primer) compared to3'-anchored dinucleotide primers (5.4bands/primer), but 3'-anchored dinucleotide primers revealed higher level of polymorphism (2.6 polymorphic bands/primer) compared to 5'-anchoreddinucleotide primers (1.43 polymorphic bands/ primer). While distribution of majority of the polymorphic bands were more or less in the expected ratios in salt-tolerant and/or salt-sensitive F₃segregating plants, but some of the bands amplified using UBC ISSR primers 823, 825,826, 849, 853, 864, 866 and 884 showed highly skewed distribution. Such polymorphic bands stand greater chances of having a linkage with the genes/ QTLs for salinity tolerance and shall be the target for further studies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Malolactic fermentation in wine with Lactobacillus casei cells immobilized on Delignified cellulosic material

In this work Lactobacillus casei ATCC 393 cells immobilized on delignified cellulosic material (DCM) were used for malolactic fermentation (MLF) of wine. Wine was produced using yeast cells immobilized on DCM at 20 degrees C, and after alcoholic fermentation, MLF at 27 degrees C followed using immobilized L. casei ATCC 393 cells. A total of 11 repeated alcoholic and subsequent MLF batches were performed within a period of 1 month. As the repeated MLF batches proceeded, the MLF activity of the immobilized biocatalyst was reduced. Malic acid degradation was reduced from 80 to 2%, pH was reduced by 0.5-0.1 unit, acetic acid concentrations were slightly reduced or remained stable (0.002 g/L), the higher alcohols 1-propanol, isobutyl alcohol, and amyl alcohol were decreased by 84, 23, and 11%, respectively, and ethyl acetate concentration was increased by approximately 56%. Wine samples were analyzed by GC-MS before and after MLF, revealing some qualitative differences.     

Food additive lactic acid production by immobilized cells of Lactobacillus brevis on delignified cellulosic material

Improvements in yield and productivity in lactic acid fermentation by Lactobaccilus brevis cells immobilized on delignified cellulosic (DC) material are reported. The system proved to be more efficient in comparison with the work reported by other workers. Yields of 80 and 100% conversion using glucose were obtained at 30 degrees C in 1 day of fermentation time. Lactic acid fermentation using whey as substrate was obtained at 30 degrees C in 1-1.5 days, resulting in 70% yield, whereas the remaining lactose in whey was converted to alcohol byproduct, leading to a 90% lactose exploitation and 100% conversion. Cell immobilization of L. brevis on DC material was proved by its reuses in repeated batch fermentations and through electron microscopy. A series of 10 repeated batch fermentations without any loss in cell activity showed a tendency for high operational stability. The presence of DC material resulted in a drastic drop of the fermentation time from 48 to 13 h.