旱稻水分利用率与碳同位素识别值之间的关系

通过温室盆栽试验 ,分析和探讨了三个水平的土壤水分条件对分蘖期和成熟期收获的旱稻(OryzasativaL .)生物量累积、水分利用率 (WUE)、植株不同部位的碳同位素识别值 (CID)的影响 ,并了解了它们之间的相互关系。水分条件包括 :饱和含水量 (W1 )、饱和含水量的 70 %(W2 )、饱和含水量的 4 0 %(W3)。结果表明当土壤水分条件从W1降低到W2时 ,分蘖期收获的生物量降低 4 5 %左右 ,成熟期收获的生物量降低 1 6 %～ 1 9%;而当从W1降低到W3时 ,分蘖期收获的生物量降低 73%左右 ,成熟期收获的生物量降低 5 5 %～ 5 7%。然而 ,根据地上部干重计算而来的WUE(WUE 地上部 )和根据全株干重计算而来的WUE(WUE 全株 )则随土壤含水量的降低而增加 ,其增幅在分蘖期为 0 .0 7～ 0 .2 8gkg-1 ,在成熟期为 0 .0 7～ 0 .4 5gkg-1 。植株的CID值变幅为 1 7.0～ 2 0 .6 ,但植株不同部位间差别显著 ,分蘖期收获的样品CID值从小到大的顺序为 :根 <最近完全伸展叶 <叶芽 <茎秆 ;而成熟期收获的样品CID值从小到大的顺序为 :籽粒 <根 <茎秆 <旗叶。随着土壤含水量的降低 ,植株所有部位的CID值亦显著减小。叶部的CID值与WUE 地上部(和WUE 全株 )之间呈一致的负相关关系。     

Genetic studies for breeding of rice cultivars with superior grain appearance and lodging resistance from the rice cultivar ‘Emi-no-kizuna’

ABSTRACT

We conducted a quantitative trait locus (QTL) analysis of grain appearance (GA) and agronomic traits of rice, using 128 recombinant inbred lines derived from ‘Emi-no-kizuna’ and ‘Tomohonami’. We detected two promising QTLs associated with GA: qGA4 on chromosome 4 and qGA8 on chromosome 8. qGA4 contributed highly to the greater percentage of perfect grains of the Emi-no-kizuna genotype. In the same region, we detected other QTLs associated with panicle number and spikelet number per panicle. In near-isogenic lines (NILs) in which Emi-no-kizuna alleles were introgressed in the genomic region of only the semi-dwarf 1 (sd1) locus (NIL_1) and both the sd1 locus and qGA8 (NIL_2), respectively, the percentage of perfect grains was significantly higher and the percentages of milky white, basal white, and white back grains were significantly lower than in Tomohonami; and the percentages of milky white and white back grains of NIL_2 were significantly lower than those of NIL_1. These results suggest that introgression in the sd1 region could improve GA, and that the addition of qGA8 could further improve GA. The culm lengths of the NILs were significantly shorter than that of Tomohonami, indicating improved lodging resistance. Grain weight of NIL_2 was significantly smaller than that of NIL_1, suggesting that the effect of qGA8 could be pleiotropic, or the gene that underlies qGA8 could be linked with genes associated with grain weight.

Abbreviations: ANOVA: analysis of variance; AT20: mean air temperature in the 20 days after heading; BW: basal white grain; CL: culm length; DAH: days after heading; GA: grain appearance; GW: 1000-grain weight; LOD: logarithm of odds; MW: milky white grain; NIL: near-isogenic line; PG: perfect grain; PL: panicle length; PN: panicle number; PTSN: putative total spikelet number; PVE: percentage of phenotypic variation explained; QTL: quantitative trait locus; RIL: recombinant inbred line; SN: spikelet number per panicle; SNP: single nucleotide polymorphism; WB: white back grain     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Estrone sulfate and progesterone profiles during late gestation in recipient cows transferred embryos produced by nuclear transfer and in vitro fertilization

The aim of present experiment was to evaluate the plasma concentrations of estrone sulfate (E(1)S) and progesterone (P(4)) during late gestation in recipient cows transferred embryos produced by nuclear transfer (NT) and in vitro fertilization (IVF). Blood samples were collected from recipients transferred embryos produced by NT (n=9) and IVF (n=13) at 160, 220, 240, 260 and 270 d of gestation and then at 5 d intervals until parturition. Plasma samples were analyzed for E(1)S and P(4) by ELISA. One NT and three IVF cows aborted between days 220 and 260 of gestation. Two NT and one IVF cow had prolonged gestation (over 290 d). One IVF cow had an overweight fetus (50 kg) after abortion (257 d). The patterns of changes in the concentrations of E(1)S during late gestation in the NT and IVF cows were almost identical. The NT and IVF cows that aborted had prolonged gestation and much higher E(1)S concentrations than the average. One NT cow aborted after 220 d of gestation and had a sudden high increase in its E(1)S concentration from 160 d to 220 d of gestation. The NT and IVF cows that had prolonged gestation also had significantly higher (P<0.05) P(4) concentrations than the average. These results raise the possibility that the E(1)S and P(4) profiles can be used to monitor some late gestational problems, such as higher birth weight, abortion and prolonged gestation.     

A GIS-aided two-phase grey fuzzy optimization model for nonpoint source pollution control in a small watershed

A method for allocating allowable ranges of total nitrogen (TN) load to nonpoint (diffuse pollution) sources in a watershed has been developed by adopting the two-phase grey fuzzy optimization approach. Competing goals of water quality management authorities and TN load dischargers at nonpoint sources such as paddy field, upland crop field, and residential area are described with linear imprecise membership functions including interval numbers. TN load discharged from each cell of the nonpoint sources is assumed to be transported along with surface, subsurface, and river flow under the conventional first-order kinetic removal with respect to distance. The travel length of the load is estimated with a digital elevation model in a geographic information system (GIS). Uncertainty of river discharge and self-purification coefficients appearing in the TN transport model is also expressed with interval numbers. The GIS-aided grey fuzzy optimization model developed here is applied to the Seimei River watershed, Japan. By solving the optimization model, the allowable load represented by an interval number at each cell is procured, which would be a scientific base for effluent control regarding nonpoint sources in the area.     

Effect of feeding wood kraft pulp on the growth performance,feed digestibility,blood components,and rumen fermentation in Japanese Black fattening steers

This study aimed to examine the effects of feeding kraft pulp (KP) on the growth performance, feed digestibility, and rumen fermentation of Japanese Black fattening steers. Ten Japanese Black fattening steers (aged 26 months) were randomly divided into control and KP groups. The control group (n = 5) was fed concentrate feed without KP, and the KP group (n = 5) was fed concentrate feed containing 10% KP. Both the groups were provided rice straw as roughage. The experiment was conducted over a period of 12 weeks. There was no significant difference in dry matter intake, daily body weight gain, and nutrient digestibility between both groups. No difference was observed in the ruminal concentrations of volatile fatty acids among the groups. At weeks 8 and 12 after the onset of the experiment, the acetate‐to‐propionate ratio in the ruminal fluid of the KP group was significantly higher than that of the control group. The average daily pH of ruminal fluid and activity of ruminal lipopolysaccharide did not differ between the groups. Our results suggested that the growth performance and feed digestibility in the Japanese Black fattening steers were not influenced by replacing concentrate feed with KP.     

Carcase characteristics of a heavy Japanese quail line under introgression with the roux gene

1. The roux plumage sex-linked recessive gene may be used for early sexing of Japanese quail in crossbreeding production systems with wild-type and roux lines. However, associated effects of the gene on carcase and meat composition need to be assessed. 2. Quail carcases from pure Line K males and females (100% K), a heavy meat line which was used as the recipient line for the introgression of the roux gene, and from same-age roux or wild-type females from the second generation of introgression (75% K) were dissected. The effects of sex, line and plumage colour on carcase components and on protein and lipid contents of various tissues were estimated. 3. Expected sex differences in carcase weights were obtained, with marginally higher values for females. However, weights of parts and carcase yield (ratio of empty carcase weight without head, neck and feet over live body weight) were similar for both sexes in pure Line K which had a 68% carcase yield. Lipid contents in leg meat were higher in males (3.1%) than in females (2.7%). 4. The roux gene did not seem to have any major impact on carcase parts or composition. However, in roux birds, leg skin was marginally higher in lipids and pectoralis major lower in proteins than in wild-type ones.     

Central injection of ketone body suppresses luteinizing hormone release via the catecholaminergic pathway in female rats

Ketosis is found in various pathophysiological conditions, including diabetes and starvation, that are accompanied by suppression of gonadal activity. The aim of the present study was to determine the role of ketone body in the brain in regulating pulsatile luteinizing hormone (LH) secretion in female rats. Injection of 3-hydroxybutyrate (3HB), a ketone body, into the fourth cerebroventricle (4V) induced suppression of pulsatile LH secretion in a dose-dependent manner in ovariectomized (OVX) rats with an estradiol (E2) implant producing diestrus plasma E2 levels. Plasma glucose and corticosterone levels increased immediately after the 4V 3HB injection, suggesting that the treatment caused a hunger response. The 3HB-induced suppression of LH pulses might be mediated by noradrenergic inputs to the hypothalamic paraventricular nucleus (PVN) because a local injection of α-methyl- p-tyrosine, a catecholamine synthesis inhibitor, into the PVN blocked 3HB-induced suppression of LH pulses and PVN noradrenaline release was increased by 4V 3HB injection in E2-primed OVX rats. These results suggest that ketone body sensed by a central energy sensor in the hindbrain may suppress gonadotropin release via noradrenergic inputs to the PVN under ketosis.