Biochemical Changes in Freshwater Prawn Macrobrachium rosenbergii During Larval Development

Abstract.— Quantitative changes in the protein, lipid and carbohydrate were studied in the early larval stages of developing freshwater prawn Macrobrachium rosenbergii reared under fed and starved conditions to understand the relative importance of these nutrients in energy metabolism of the growing larvae. Larvae obtained from several females were stocked into three 250-L tanks at a density of 30 larvae/L. The feeding regime consisted of newly hatched Artemia nauplii. Protein was always the major organic constituent followed by lipids and then carbohydrates of both fed and starved larvae. Protein levels of both fed and starved larvae increased during development, suggesting an important role in morphogenesis. The decline of lipid during the larval growth that was more rapid for starved larvae, suggests a probable utilization of lipid as the major metabolic source of energy. Carbohydrates formed less than 5 and 2.4% of the larval dry weight of fed and starved larvae, respectively, suggesting their limited role in larval metabolism.     

Goat horns: Platforms for viroid transmission to fruit trees?

Mechanical inoculations with contaminating tools and propagation of infected budwood were considered the main causes for the omnipresence of multiple viroid species among citrus and other Middle Eastern and Mediterranean fruit trees and grapevines. However, neither means could explain viroid infections of wild trees — scattered on terrains inaccessible to humans — nor the finding of similar viroids among graft-incompatible plants. Northern hybridization of RNA extracts made of scrapings from the surfaces of goat (Capra hircus) horns that were rubbed against etrog (Citrus medica) stems infected with a citrus viroids complex, revealed accumulation of considerable amounts ofCitrus exocortis viroids (CEVd) andHop stunt viroids (HSVd). Experimental transmission of both CEVd and HSVd was obtained by rubbing healthy citrus plants with goat horns that had been rubbed 24 h earlier on infected etrog stems. These results implicate goats as possible vectors of viroids. Transmissionvia goats could have facilitated the long-range spread of viroids among cultivated and wild plants andvice versa and also among graft-incompatible plants.     

Effect of pre-harvest foliar application of amino acids and seaweed (Ascophylum nodosum) extract on growth,yield, and storage life of different bell pepper (Capsicum annuum L.) cultivars grown under hydroponic conditions

The study was set up to evaluate the efficiency of amino acids and seaweed on vegetative growth, reproductive phase, yield, and postharvest storage quality of hydroponically grown bell pepper cultivars “Sven Rz F-1” and “Red Knight.” Different concentrations of amino acid and seaweed were sprayed on bell pepper plants under hydroponic conditions. Pre-harvest foliar application of amino acids and seaweed significantly increased plant height, number of leaves, leaf area, yield per plant, number of marketable fruits per plant, average fruit diameter, fruit wall thickness, and average single fruit weight. Amino acid and seaweed significantly improved postharvest physicochemical quality of both bell pepper cultivars under extended cold storage conditions. Conclusively, amino acid as well as seaweed extract not only improved growth, development, yield, and overall quality of bell pepper cultivars but also increased storage life with reduced weight loss and decay along with better physicochemical quality.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

New molecular markers linked to qualitative and quantitative powdery mildew and scald resistance genes in barley for dry areas

A partial genetic linkage map was constructed on 71 doubled-haploid lines derived from a cross between the barley lines Tadmor and WI2291 with 181 molecular markers. The segregating population was used to detect markers linked to the gene Mlg conferring resistance to powdery mildew (Erysiphe graminis f. sp. hordei) and to genes for quantitative resistance to scald (Rhynchosporium secalis). The gene Mlg on chromosome 4H was flanked by two AFLP markers at a distance of 2.0 and 2.4 cM, respectively. QTLs for resistance to scald were detected on chromosomes 2H and 3H. This association of molecular markers with qualitative and quantitative disease resistance loci represents a valuable starting-point for marker-assisted selection. This revised version was published online in July 2006 with corrections to the Cover Date.     

Expression profiling of transgenes (Cry1Ac and Cry2A) in cotton genotypes under different genetic backgrounds

Transgenic cotton carrying the CrylAc gene has revolutionized insect pest control since its adoption,although the development of resistance in insect pests has reduced its efficacy.After 10 years of cultivating Bacillus thuringiensis(Bt) cotton with a single Cry1 Ac gene,growers are on the verge of adopting Bt cotton that carries the double gene(Cry1 Ac+Cry2 A) due to its better effectiveness against insect pests.Thus,the current study was designed to evaluate the role of each gene in the effect...     

Wheat x pearl millet hybridization: consequence and potential

Summary Eight grain pearl millet (2n=14) accessions were crossed as male to hexaploid spring wheat cv. Fukuho (2n=6x=42). An average of 80% wheat pistils showed pearl millet pollen tube entry in the ovules, compared to 56% in wheat x maize cv. Seneca 60 cross. Of the 15 embryos, obtained through in vitro immature seed culture from wheat x pearl millet crosses, 3 plantlets were produced and grown to maturity. These three were of the somatic chromosome constitution 2n=42, 21 and 22, respectively. Haploid wheat plant (2n=21) apparently originated from pearl millet chromosome elimination during embryogenesis. The 22 chromosome plant had retained a single pearl millet chromosome at tillering stage, but this chromosome was eliminated from pollen mother cells prior to and also during gamete formation. The significance and potential uses of this wide cross is discussed.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.     

Acidulated activation of phosphate rock enhances release,lateral transport and uptake of phosphorus and trace metals upon direct-soil application

Phosphate rock (PR) was activated via acidulation with HCl, EDTA, and oxalic acid to enhance its reactivity. The release, lateral transport, and uptake of phosphorus (P) along with trace metals from pristine and activated PRs were investigated in a soil micro-block system over a period of 27 days, using wheat (Triticum aestivum L.) plants. Significantly (p < 0.05) higher amounts of available soil P, Fe, Mn, and Zn were released from all the PRs after application to soil within first 9 days of seedling transplantation, while the release of other trace metals (Cd, Co, Cr, Cu, Ni, and Pb) was minimal (<1.2 mg kg^?1). On cumulative basis, APR-O (oxalic acid activated PR) was the most efficient amendment releasing 164% more available P, followed by APR-E (EDTA activated PR) releasing 130% more available P, compared to the pristine PR. Similar results were also observed in the release of available Fe, Mn, Zn, and other trace metals. The highest diffusive mass fluxes for available P, Mn, Fe, and Zn in soil were observed after 3 days of seedling transplantation, which reduced subsequently. The uptake of P, Fe, Mn, and Zn by wheat plants was increased by 394%, 715%, 92%, and 91%, respectively, in APR-O application compared to the pristine PR, while it was increased by 280%, 188%, 16%, and 27%, respectively, in APR-E application compared to the pristine PR. Subsequently, APR-O and APR-E amendments resulted in enhanced shoot lengths, root lengths, shoot dry matter, and root dry matter contents of wheat plants. Hence, it was concluded that activation of PR with oxalic acid and EDTA prior to direct soil application may enhance the reactivity of PR and could serve as a cost-effect fertilization strategy for higher wheat crop production.