Flow over rectangular sharp-crested weirs

Sharp-crested weirs are the simplest form of over-flow spillway that commonly used to determine the flow rate in hydraulic laboratories, industry and irrigation systems, where highly accurate discharge measurements are needed. In this study, the experimental upper and lower nappe profiles in rectangular sharp-crested weirs are fitted by quadratic and cubic equations, respectively. In addition, free-vortex theory is used to simulate flow over this kind of weirs and determine discharge coefficient. Physical models of sharp-crested weirs with various widths and heights were considered. The proposed method agrees well with the experimental observations. Also, the experimental data indicate that the suggested equation presents reasonable results for the range of 0 < h/P < 9.     

Agricultural zinc fluxes into soils and crops of central Iran at regional scale

Mass flux assessment can provide information that is essential for a sustainable management of elements in agricultural soils. In this article, we present an assessment of regional-scale averages of zinc (Zn) fluxes into agricultural soils and crops of central Iran for the period 1997–2011, using available databases such as regional agricultural statistics. The basic units of the balances were 15 townships of the provinces Qom, Isfahan and Fars. Averaged over the entire study region, the net Zn input into arable soil resulting from all fertilizer inputs – Zn removal with harvested crops was 1515 g ha^?1 yr^?1 across the entire region, with a range of 438–3009 g ha^?1 yr^?1 among townships. Estimated average Zn inputs with manure, mineral fertilizers, sewage sludge and compost were 1254, 531, 19 and 7 g ha^?1 yr^?1, respectively. The input-to-output ratio of these fluxes ranged from 1.8 to 12.9 among townships and averaged 6.1 for the entire study area. Considering that outputs other than with crop harvests are minor, Zn stocks are rapidly building up in the soils of the study region. Uncertainties in the manure and crop removal data were the main sources of estimation uncertainty in this study.     

Repurposing Ionophores as novel antimicrobial agents for the treatment of bovine mastitis caused by Gram‐positive pathogens

Increasing reports of multidrug‐resistant bacterial infections in animals has created a need for novel antimicrobial agents that do not promote cross‐resistance to critically important antimicrobial classes used in human medicine. In response to the recent emergence of antimicrobial resistance in several bovine mastitis pathogens, in vitro antimicrobial susceptibility was determined for four polyether ionophores (lasalocid, monensin, narasin and salinomycin) against Staphylococcus spp. and Streptococcus spp. isolated from clinical cases. In addition, erythrocyte haemolysis and WST ‐1 cell proliferation assays were used to assess in vitro mammalian cell cytotoxicity and biofilm susceptibility testing was performed using the minimum biofilm eradication concentration (MBEC ?) biofilm assay. Lasalocid, monensin, narasin and salinomycin exhibited bacteriostatic antimicrobial activity against all pathogens tested, including methicillin‐resistant staphylococci, with MIC ₉₀ values <16 μg/ml. Narasin and monensin displayed the least toxicity against mammalian cell lines and all compounds significantly reduced viable cell numbers in a Staphylococcus aureus biofilm. Based on in vitro characterization, all four ionophores offer potentially novel treatments against bovine mastitis but in vivo studies will be essential to determine whether acceptable safety and efficacy is present following intramammary administration.     

Effects of parenteral supply of iron and copper on hematology, weight gain, and health in neonatal dairy calves

The objective of the present study was to examine the effects of parenteral administration of iron and copper on hematological parameters, weight gain, and health of neonatal dairy calves in the period when iron and copper deficiency could be existed. Twenty-four Holstein calves were used for the experiment and randomly assigned to four different treatments. Treatments consisted of (1) control (no injections of Fe and Cu), (2) test 1 (1000 mg Fe as fe-dextran was injected to each calf at day 2 of age), (3) test 2 (160 mg Cu as methionine-copper complex was injected to each calf at day 14 of age), and (4) test 3 (Fe and Cu were injected to each calf as mentioned previously). Blood samples were collected from all of the calves within 24-48 hours after birth and at 7, 14, 21 and 28 days of age for measuring hematological parameters and within 24-48 hours after birth and at 14, 21 and 28 days of age for the determination of iron, copper, TIBC concentrations, and AST activity. Anti-coagulated blood was analyzed shortly after collection for: number of red blood cell (RBC), hemoglobin (Hb), heamatocrit (HCT), total leukocyte count (WBC), Platelet (Plt), MCH, MCV, MCHC, and differential leukocyte counts. The amounts of iron, copper, TIBC, and AST were measured in serum. Group had significant effects on the amounts of HCT, RBC, hemoglobin, MCV, neutrophil, weekly weight gain, and daily gain during each week (p < 0.05). Sampling time had significant effects on the amounts of RBC, MCV, MCH, MCHC, WBC, neutrophil, lymphocyte, monocyte, platelet, fibrinogen, copper, TIBC, AST, weight, weekly gain and, daily gain during each week (p < 0.05). significant interactions between sampling time and group were seen for HCT, RBC, hemoglobin, MCV, platelet, total protein, fibrinogen, iron, and TIBC (p < 0.05). Improved RBC parameters and MCV were seen in calves of group 4 (test 3) in comparing with control group. Total and daily gains were also significantly improved in test groups in comparing with control group (p < 0.05). No significant difference was seen for the days of treatment between groups.     

Productivity and optimal management of the uneven-aged hardwood forests of Hyrcania

Hyrcania is a productive region near the southern coast of Caspian Sea. Her forests are mostly uneven-aged beach-dominated hardwood mixtures. There is increasing willingness to treat these forests without clear-felling, following the ideas of continuous cover management. However, lack of growth and yield models have delayed this endeavor, and no instructions for uneven-aged management have been issued so far. This study developed a set of models that enable the simulation of stand development in alternative management schedules. The models were used to optimize stand structure and the way in which various initial stands should be converted to the optimal uneven-aged structure. The model set consists of individual-tree diameter increment model, individual-tree height model, survival model, and a model for ingrowth. The models indicate that the sustainable yield of the forests ranges from 2.2 to 7 m³ ha^?1 a^?1 in uneven-aged management, depending on species composition. Better ingrowth would substantially enhance productivity. The optimal stand structure for maximum sustained yield has a wide descending diameter distribution, the largest trees of the post-cutting stand being 80–100 cm in dbh. If cuttings are conducted at 30- or 40-year intervals, they should remove 20–40 largest trees per hectare. Despite moderate growth rate, uneven-aged management produces high incomes, 850–1,000 UDS ha^?1a^?1, because the timber assortments that are obtained from the removed large trees have very high selling prices. Optimal conversion to uneven-aged structure showed that the steady-state stand structure depends on initial stand condition and discount rate when the length of the conversion period is fixed. Discount rates higher than 1 % lead to reduced wood production, heavy cuttings, and low basal areas of the steady-state forest.     

Using 137Cs and 210Pbex measurements to explore the effectiveness of soil conservation measures in semi-arid lands: a case study in the Kouhin region of Iran

Journal of Soils and Sediments - One of the most fragile agro-ecosystems in Iran is represented by dry farming lands on steep hillslopes that occupy ca. 54% of the national agricultural lands....     

Synthesis and characterization of novel biocompatible four-arm star-shaped copolymers by using a new tetramethacrylate core

The objective of this study was to synthesize and characterize two novel four-arm star-shaped copolymers of N-isopropylacrylamide (NIPAAm), methacrylic acid (MAA), N,N-(dimethylamino) ethyl methacrylate (DMAEMA) and 1-vinyl-2-pyrrolidone (VP) that was initiated from a new tetramethacrylate monomer (TMAM) as the core by the free radical polymerization approach. Novel multiacrylic monomer was synthesized via three key consecutive reactions. All the intermediates and the final product have been fully characterized. The polymerization reaction was conducted by the core first method and the star-shaped copolymers were analyzed by FT-IR, ¹H NMR and Thermo-Gravimetric Analysis (TGA). MTT assay was used to evaluate in vitro cytotoxicity of the star copolymers on lung cancer cell lines. These star copolymers showed no in vitro cytotoxicity to A549 cells. The results showed that these copolymers can be promising drug carriers because they showed no in vitro cytotoxicity and they have various functional groups for association and interaction with drugs.     

Development and evaluation of local communities incentive programs for improving the traditional forest management: A case study of Northern Zagros forests,Iran

We examined the local community incentive programs to improve traditional forest management in three forested villages in Baneh city, Kurdistan province in the northern Zagros forests of western Iran. Zagros forests cover 6.07 million ha and support rich plant and animal diversity. Changes in local community social and economic sys-tems and the inefficiency of traditional forest management led to a criti-cal situation in the stability of forest regeneration in recent decades. Due to a shortage of productive and arable lands and resulting unemployment and poverty, people overexploited the Zagros forests. Outside interven-tion in traditional forest management creates conflicts between local peoples and forest management organizations. To achieve sustainable forest management, including forest resources conservation and im-provement of natural resource based livelihoods of communities, it is desirable to implement Forestry Incentive Programs （FIP） based on the important functions of forests. Detailed information on the so-cio-economics of communities, the effect of forests on local livelihoods, and lists of products extracted from the forest were obtained from a sur-vey of local communities though questionnaire, interview and observa-tion. We studied 276 households in three villages and completed 76 ques-tionnaires by householders in the quantitative analysis. Sampling was performed by simple random sampling （SRS）. The needs of rural com-munities, such as livestock husbandry, mainly arise from the characteris-tics and environmental features of villages. We identified the driving forces, pressures, status, impacts and responses （DPSIR） to design incen-tive programs, by DPSIR analysis and interaction analysis. Evaluation of local community benefits from forests showed that in order to improve forest management, 319 dollars per year would be needed by each family as an incentive in 2010 to prevent lopping and firewood collecting, the main causes of forest degradation.