Evaluation of the simultaneous effects of processing parameters on the iron and zinc solubility of infant sorghum porridge by response surface methodology

The purpose of this study was to improve the micronutrient quality of indigenous African infant flour using traditional techniques available in the region. Response surface methodology was used to study the effect of duration of soaking, germination, and fermentation on phytate and phenolic compounds (PC), pH, viscosity, and the in vitro solubility (IVS) of iron and zinc in infant sorghum flour. The phytate and the PC concentrations of the flour were significantly modified as a result of the duration of germination and fermentation and their mutual interaction. These modifications were accompanied by a significant increase in % IVS Zn after 24 h of sprouting. Except for the interaction of soaking and fermentation, none of the processing parameters exerted a significant effect on the % IVS Fe. The viscosity of the porridge prepared with the flour decreased significantly with the duration of germination, making it possible to produce a porridge with high energy and nutrient density. The use of germination in combination with fermentation is recommended in the processing of cereals for infant feeding in developing countries.     

Advances in Variable Rate Technology Application in Potato in The Netherlands

Precision agriculture is a farming management concept based on observing, measuring and responding to inter- and intra-field variability in crops. In this paper, we focus on responding to intra-field variability in potato crops and analyse variable rate applications (VRAs). We made an overview of potential VRAs in potato crop management in The Netherlands. We identified 13 potential VRAs in potato, ranging from soil tillage to planting to crop care to selective harvest. We ranked them on availability of ‘proof of concept’ and on-farm test results. For five VRAs, we found test results allowing to make a cost-benefit assessment. These five VRAs were as follows: planting, soil herbicide weed control, N side dress, late blight control and haulm killing. They use one of two types of spatial data: soil maps or biomass index maps. Data on costs and savings of the VRAs showed that the investments in VRAs will pay off under practical conditions in The Netherlands. Savings on pesticide use and N-fertilizer use with the VRAs were on average about 25%, which benefits the environment too. We foresee a slow but gradual adoption of VRAs in potato production. More VRAs will become available given ongoing R&D. The perspectives of VRAs in potatoes are discussed.     

Occasional loss of expression of phosphinothricin tolerance in sexual offspring of transgenic oilseed rape (Brassica napus L.)

The commercial and economic value of genetically modified crops is determined by a predictable, consistent and stable transmission and expression of the transgenes in successive generations. No gene inactivation is expected after selfings or crosses with non-transformed plants of homozygous transgenic oilseed rape plants if the expression of the transgene in homozygous or hemizygous nature in such plants is stable. The segregation ratios of phosphinothricin (PPT) tolerance in successive generations of selfings and mutual crosses of a few independent transgenic PPT-tolerant oilseed rape plants indicated a dominant, monogenic inheritance. In within-variety and between-variety crosses no transgene inactivation was observed. However, after selfings and backcrosses with non-transgenic oilseed rape infrequent loss of the expression of the PPT tolerance transgene was observed independent from its homozygous or hemizygous nature. Molecular analysis of PPT-susceptible plants showed that the loss of expression was due to gene inactivation and not to the absence of the transgene. Methylation and co-suppression are mechanisms that might cause reduced or even loss of expression of the transgene in later generations. The implications of this observation for seed multiplication of varieties and breeding activities with transgenic oilseed rape are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Somatic hybridization as a tool for tomato breeding

Protoplast fusion can be used to produce somatic hybrids of species that cannot be obtained by sexual hybridization. The possibility to introgress genes from Solanum species into the cultivated tomato species Lycopersicon esculentum, and to obtain novel cytoplasm-nucleus combinations (cybrids) was considered as an important strategy to extend the genetic variation available for tomato breeding. Somatic hybrids between L. esculentum and other Lycopersicon species, as well as between L. esculentum and Solanum or Nicotiana species, have been produced. Specific mutants, genotypes with antibiotic resistances, and metabolic inhibition by iodoacetate or iodoacetamide and irradiation were used for the selection of hybrids. In addition, the improvement of protoplast culture techniques and the use of the favourable tissue culture traits derived from species such as L. peruvianum, which have been introduced into tomato by classical breeding, allowed the efficient recovery of somatic hybrids. However, the occurrence of somatic incongruity in fusion combinations of L. esculentum and Solanum and even more in L. esculentum and Nicotiana, did not allow the production of true cybrids and/or fertile hybrids, indicating the importance of both cytoplasm-nucleus and nucleus-nucleus interactions in somatic incongruity. Another problem with fusions between distantly related species is the strongly reduced fertility of the hybrids and the very limited homoeologous recombination between chromosomes of the parental species. Partial genome transfer from donor to recipient through microprotoplast (+) protoplast fusion, and the production of monosomic or disomic chromosome addition lines, light overcome some of these problems. In symmetric somatic hybrids between L. esculentum and S. tuberosum the occurrence of limited somatic and meiotic recombination was demonstrated. Fertile progeny plants could be obtained, though at a low frequency, when embryo rescue was performed on a large scale after backcrossing hexaploid somatic tomato (+) potato hybrids with a tetraploid potato genotype. The potential value of genomic in situ hybridization (GISH) and RFLPs for the analysis of the genome/chromosome composition of the hybrids has been demonstrated for intergeneric somatic hybrids between Lycopersicon and Solanum.Abbreviations cpDNA chloroplast DNA - mtDNA mitochondrial DNA     

Race specific resistance against Phytophthora infestans in potato is controlled by more genetic factors than only R-genes

Summary For RFLP mapping of R-genes, determining resistance to specific races of Phytophthora infestans in tetraploid potato, it is necessary to develop well segregating populations at the 2x level. During mapping studies, evidence was obtained that more genetic factor(s) are involved in the expression of R-genes than conventionally believed. Two experiments are described in which such an additional genetic factor was suppressing or enhancing the expression of unknown R _nand R _ifactors. R _nand R _iappeared to be present in the investigated plant material, containing R4 and R10, or in one of the susceptible crossing parents. In a third experiment, the expression and the segregation of the well known R1 gene was influenced by an additional genetic factor. In that case there were indications for a dominant suppressor. This was established by the selection of susceptible plants carrying a RFLP allele of probe GP21 closely linked to R1. In three of the four F₁ populations, resulting from crosses between such susceptible plants and susceptible tester plants, resistnat progenies were found. The resistance appeared to be R1-specific. This clearly indicates that in three of the four investigated susceptible plants, the R1 gene was still present but not expressed.     

Making sequential analysis of environmental monitoring data feasible by simplifying the covariance matrix structure

As environmental monitoring data are collected successively in time, the data are suitable for sequential analysis. An earlier article proposed a refined sequential probability ratio test (SPRT) to test against a minimal relevanttrend, assuming no serial correlations and without modeling the spatial covariance matrix. As the model parameters are unknown in advance, a minimal number of observations(n _min) is required for estimation prior to analysis. Leaving the spatial covariance matrix unstructured, n _min increases if the number of sampling locations increases. Therefore, assumptions on the spatial covariance matrix are proposed, thereby reducing the number of nuisance parameters, thus reducingn _min. This article studies. three simple types of spatial covariance matrix structures and derives an adjusted SPRT for each of these types. Furthermore, we examine the robustness against deviations from the assumed spatial covariance matrix structure. Simulation studies show that adjusted SPRTs can be derived rather easily and that they are in general robust against deviations from the assumed type of spatial covariance matrix. Sequential analysis of simulated data, which are based on monitoring data of bats in the Netherlands, illustrates the use of one of the derived SPRTs.     

The role of phagocytic cells in enhanced susceptibility of broilers to colibacillosis after Infectious Bronchitis Virus infection

Colibacillosis results from infection with avian pathogenic Escherichia coli bacteria. Healthy broilers are resistant to inhaled E. coli, but previous infection with vaccine or virulent strains of Infectious Bronchitis Virus (IBV) predisposes birds for severe colibacillosis. We investigated whether IBV affects recruitment and function of phagocytic cells and examined NO production, phagocytic and bactericidal activity, and kinetics of peripheral blood mononuclear cells (PBMC) and splenocytes. Moreover, we measured cytokine mRNA expression in lung and spleen samples. Broilers were inoculated with IBV H120 vaccine or virulent M41 and challenged 5 days later with E. coli 506. A PBS control and E. coli group without previous virus inoculation were also included. Birds were sacrificed at various time points after inoculation (h/dpi). Inoculation with IBV induced extended and more severe colibacillosis than with E. coli alone. At 4dpi, the number of KUL-01(+) PBMC in all E. coli-inoculated groups was significantly higher than in PBS-inoculated birds, which correlated with lesion scores. From 1 to 4dpi, NO production by PBMC from all E. coli-inoculated animals was elevated compared to PBS birds. Bactericidal activity of PBMC in IBV-inoculated animals at 7dpi was lower than in PBS- and E. coli-inoculated birds, but phagocytic capacity and recruitment were not severely impaired. In spleen samples of IBV-infected animals reduced expression of IL-1beta, IL-6, IL-8, IL-10, IL-18 and IFN-gamma mRNA was found 1dpi. Our results suggest that enhanced colibacillosis after IBV infection or vaccination is caused at least by altered innate immunity and less by impairment of phagocytic cell function.     

Moving integrated weed management from low level to a truly integrated and highly specific weed management system using advanced technologies

Integrated weed management (IWM) is one of the most commonly referred to approaches for sustainable and effective weed control in agriculture, yet it is not widely practiced, likely because current IWM systems fail to meet performance expectations of growers. The effectiveness and value of IWM systems should increase with increasing application specificity and true integration made possible with contemporary advances in technology, information systems and decision support. IWM systems can be classified based on their degree of application specificity and level of integration of tactics. In the application specificity pathway, a tactic is applied at a range of scales, from subfield to plant specific. In the integration pathway, multiple weed control tactics are combined in a synergistic manner. We hypothesise that the full value of IWM can and will be realised only when current and emerging technological innovations, information systems and decision tools are synergistically combined for use in real time. The True IWM system we envision requires automation and robotic technologies, coupled with information and decision support systems that are available or emerging but not yet enabled, in a proven integrated platform. Examples of low‐level, traditional and precision IWM systems are discussed, and research needs for a True IWM system are presented. We conclude that the immediate call should be for a long‐term investment in R&D and education (both theoretical and empirical) to develop and implement True IWM systems, an effort best accomplished in a public–private partnership where all essential entities are fully engaged and adequately resourced, including growers from all countries who will utilise IWM.     

Development of bio-assays and screening for resistance to beet armyworm (Spodoptera Exigua Hübner) in Allium cepa L. and its wild relatives

The beet armyworm (Spodoptera exigua Hübner)is the most important pest in tropical Alliumcultivations. All shallot (Allium cepa L. group Aggregatum) cultivars are susceptible to this pest. Therefore accessions from three wild Alliumspecies, namely A. galanthum Kar. et Kir., A. fistulosum L. and A. royleiStearn, next to A. cepa L. were used to screen for resistance. First of all, a reliable bio-assay had to be developed. To this end transparent plastic cages with in total 5 plants of one accession per cage were placed on per lite in a heated greenhouse. Five 3-day old larvae were inoculated on each plant. Eight days after inoculation the number of surviving larvae per cage and the mean fresh weightper larva was determined. The lowest larval survival (36%) was found on A. roylei. This was not, however, significantly different from other Allium accessions. Significant differences were found in the fresh weight per larva fed on different Allium accessions. The larvae survived on A. roylei had a very low fresh weight (10.3 mg per larva), while those on an accession of A. fistulosum had the highest fresh weight (45.1 mg per larva). The larval fresh weight on A. roylei was lower than all the other accessions except from the tropical shallot cultivar Bawang Bali. To check whether or not a toxic compound was involved in the resistance present in A. roylei, tenaccessions from four Allium species were screened. Five 3-day old larvae were inoculated on regularly replaced leaf material of each accession ofAllium species. No significant differences were found in mean fresh weight per larva and mean survival of larvae among different accessions. There were also no significant differences in pupal weight and developmental time. All larvae became pupae 10 days after inoculation. The data indicate that there is no toxic compound present in A. roylei. These results are underlined by the observation in the greenhouse bio-assay that A. roylei plants were equally damaged by the beet armyworm compared to otherAllium species. The results obtained so far therefore suggest that introduction of resistance to S. exigua via the exploitation of variation for resistance to the beet armyworm in A. roylei is unclear and that genetic engineering using Cry sequences could provide a way forward. This revised version was published online in July 2006 with corrections to the Cover Date.