Permeability profile estimation of flavonoids and other phenolic compounds by biopartitioning micellar capillary chromatography

This paper points out the usefulness of biopartitioning micellar chromatography (BMC) using capillary columns as a high-throughput primary screening tool providing key information about the oral absorption, skin permeability, and brain-blood distribution coefficients of 15 polyphenols (6 flavones, 2 flavonols, a flavanone, 2 flavan-3-ols, 3 phenolic acids, and a phloroglucinol) in a simple and economical way. For the compounds studied, except vicenin-2, rutin, chlorogenic acid, p-hydroxycinnamic acid, and 4-hydroxybenzoic acid, maximal oral absorption (>90%) can be expected, if there are not solubility problems or metabolic processes. On the other hand, the most retained compounds in BMC, that is, 5-hydroxyflavone, flavone, and flavanone, show the highest brain-blood distribution coefficients and skin permeability coefficients.     

Relationship Between Soft Wheat Flour Physicochemical Composition and Cookie‐Making Performance

Nowadays in Argentina, cookies, crackers, and cakes are made of flour obtained from bread wheat with additives or enzymes that decrease the gluten strength but increase production costs. The present research work aims to study the relationship between flour physicochemical composition (particle size average [PSA], protein, damaged starch [DS], water soluble pentosans [WSP], total pentosans [TP], and gluten), alkaline water retention capacities behavior, solvent retention capacities profile (SRC) and cookie‐making performance in a set of 51 adapted soft wheat lines with diverse origin to identify better flour parameters for predicting cookie quality. Cookie factor (CF) values were 5.06–7.56. High and significant negative correlations between sucrose SRC (–0.68), water SRC (–0.65), carbonate SRC (–0.59), and CF were found, followed by lactic SRC that presented a low negative but significant correlation (r = –0.35). The flour components DS (r = –0.67), WSP (r = –0.49), and TP (r = –0.4) were negatively associated to CF. PSA showed a negative correlation with CF (r = –0.43). Protein and gluten were the flour components that affected cookie hardness, but no significant correlation were found with pentosan or DS content. A prediction equation for CF was developed. Sucrose SRC, PSA, and DS could be used to predict 68% of the variation in cookie diameter. The cluster analysis was conducted to assess differences in flour quality parameters among genotypes based on CF. Clusters 1 and 4 were typified by lower CF (5.70 and 5.23, respectively), higher DS, pentosan content, and SRC values. Cluster 2 with a relative good CF (6.47) and Cluster 3 with the best cookie quality, high CF (7.32) and low firmness, and the lowest DS, TP, WSP content, and sucrose SRC values.     

Induced spawning of hatchery-raised Brazilian catfish, cachara Pseudoplatystoma fasciatum (Linnaeus, 1766)

In the months of January 2001 and 2002, female cachara Pseudoplatystoma fasciatum were selected during their first and second gonadal maturation (2 years and 7 months old and 3 years and 7 months old, respectively) with an of oocyte diameter of 937.5 μm (82.5% with central nuclei and 17.5% with peripheral nuclei). Nine females in first maturation received two doses of carp pituitary extract (CPE), 0.5 mg/kg and 5.0 mg/kg; seven received two doses of human chorionic gonadotropin (hCG), 5 and 10 IU/g; five received doses of 0.5 CPE mg/kg and 5 hCG IU/g (CPE+hCG); and four received 0.9% saline (saline). Nine females from CPE and seven from hCG presented oocytes with the same diameter at the moment of oocyte release (100% with germinal vesicle breakdown and fertilization rate of 53.44±18.3 and 54.81±11.8%; larvae number of 165,330±94.1 and 158,570±20.6, respectively). The five females from CPE+hCG did not respond to the hormonal treatment. The four females from the saline group did not ovulate. In January 2002, 6 of 15 selected females that were going through the second reproductive cycle received CPE (five received hCG and four received saline), showing oocyte diameters similar to the ones in the first maturation. At stripping, CPE females had an oocyte diameter of 1062.5 μm (the hCG females had oocyte diameters ranging from 937.5 to 1125.0 μm; fertilization rates of 56.08±30.9 and 81.90±17.3%; 364,547±244 and 633,129±190, larvae, respectively). The fertilization rates and larvae number were higher in the second gonad maturation, both for CPE and hCG.     

Novel, cyclic heat dissipation method for the correction of natural temperature gradients in sap flow measurements. Part 2. Laboratory validation

Sap flow measurements conducted with thermal dissipation probes (TDPs) are vulnerable to natural temperature gradient (NTG) bias. Few studies, however, attempted to explain the dynamics underlying the NTG formation and its influence on the sensors' signal. This study focused on understanding how the TDP signals are affected by negative and positive temperature influences from NTG and tested the novel cyclic heat dissipation (CHD) method to filter out the NTG bias. A series of three experiments were performed in which gravity-driven water flow was enforced on freshly cut stem segments of Fagus sylvatica L., while an artificial temperature gradient (ATG) was induced. The first experiment sought to confirm the incidence of the ATG on sensors. The second experiment established the mis-estimations caused by the biasing effect of the ATG on standard TDP measurements. The third experiment tested the accuracy of the CHD method to account for the ATG biasing effect, as compared with other cyclic correction methods. During experiments, sap flow measured by TDP was assessed against gravimetric measurements. The results show that negative and positive ATGs were comparable in pattern but substantially larger than field NTGs. Second, the ATG bias caused an overestimation of the standard TDP sap flux density of ～17 cm(3) cm(-2) h(-1) by 76%, and the sap flux density of ～2 cm(3) cm(-2) h(-1) by over 800%. Finally, the proposed CHD method successfully reduced the max. ATG bias to 25% at ～11 cm(3) cm(-2) h(-1) and to 40% at ～1 cm(3) cm(-2) h(-1). We concluded that: (i) the TDP method is susceptible to NTG especially at low flows; (ii) the CHD method successfully corrected the TDP signal and resulted in generally more accurate sap flux density estimates (mean absolute percentage error ranging between 11 and 21%) than standard constant power TDP method and other cyclic power methods; and (iii) the ATG enforcing system is a suitable way of re-creating NTG for future tests.     

Aboveground biomass,transpiration and water use efficiency in eucalypt plantation fertilized with KCl,NaCl and phonolite rock powder

Potassium has important physiological functions in eucalypt plantations, increasing their productivity when applied to soil via mineral fertilizers. There is interest in identifying alternative sources to KCl owing to its high cost and limited reserves. The aim of the study was to test the effect of replacing KCl with NaCl and phonolite rock powder. Two comparisons were made: (1) application of 283 kg ha^?1 of KCl compared with that of 2125 kg ha^?1 of phonolite rock powder (equivalent to 170 kg ha^?1 of K₂O in both treatments); (2) application of 139 kg ha^?1 of NaCl compared with that of 183 kg ha^?1 of KCl (equivalent to 2.33 kmol Na and K, respectively). Radial growth, soil water content, leaf water potential (Ψ), accumulated transpiration, stem volume and biomass increment, as well as water use efficiency (WUE) were evaluated. In the first comparison, both fertilizations presented equal values for all characteristics evaluated. In the second, the accumulated transpiration in trees fertilized with KCl was 17% higher than that in plants fertilized with NaCl. In contrast, the WUE was 20% higher in the trees fertilized with NaCl than in those fertilized with KCl, reflecting the lower water consumption for the same increment in stem volume and biomass. We conclude that phonolite rock powder and NaCl are possible substitutes for conventional K fertilization performed with KCl.

     

Ecophysiology of iron homeostasis in plants

In nature, iron (Fe) occurs in abundance and ranks fourth among all elements on Earth’s surface. Still, its availability to plants is reduced, once this element is in the form of hydrated oxides, which can limit plant productivity and biomass production. On the other hand, in high concentrations, this essential micronutrient for the plants can become a toxic agent, increasing the environmental contamination. Fe is necessary for the maintenance of essential processes like respiration and photosynthesis, participating in the electron transport chain and in the conversion between Fe²⁺ and Fe³⁺, being a key element for carbon dioxide (CO₂) fixation and, therefore, important for crop production of cultivated or natural species. The balance of Fe should be strictly controlled, because both its deficiency and its toxicity affect the physiological process of plants. In aerated soils Fe is present in the form of Fe³⁺, which is the oxidized form and is less available to plants, so these organisms have developed different strategies for absorption, transport and storage of Fe. Deficiency and excess of Fe correlate with local soil conditions and with the care adopted in plant nutrition during the phenological phases and/or in the course of its cultivation. In situations of excessive accumulation of Fe in tissues, an enhancement of hydroxyl radical generation (OH^?) occurs by Fenton reaction. Here, we review the nutritional, genetic and ecophysiological aspects of uptake, translocation and accumulation of Fe ions in plants growing under conditions of deficiency or toxicity of this metal.     

Effect of Stocking Density on Growth,Survival, and Condition of the Mexican Cichlid Cichlasoma beani

The Mexican cichlid Cichlasoma beani is currently exploited regionally as food and can be commercialized in the aquarium trade. Natural populations of C. beani may already be negatively affected by anthropogenic alteration of the areas in which it is distributed. The aim of the present study was to examine the effect on growth, survival, and condition of C. beani cultured in three stocking densities: three (D3), six (D6), and nine (D9) fish per each 40 L tank. At the end of a 6‐wk trial the fish cultured in D3 were longer, heavier, and grew faster than the rest of the treatments but their survival was the lowest compared to D6 and D9. The mortalities were caused by a strong aggressive behavior in D3.     

The ‘pole-hooking’ method: A novel and economical technique for in situ tagging small to medium-sized fishes

We describe a new manual procedure for catching and tagging fish underwater, the ‘pole-hooking’ method, and demonstrate and discuss its advantages over standard tagging techniques (i.e. hook-and-line fishing). The new technique was designed for tagging Acanthistius brasilianus [Cuvier, M., Valenciennes, L.B., 1828. Histoire Naturelle des Poissons. Museau de Histoire Naturelle, Paris], a small to medium-sized fish inhabiting rocky reefs of the Argentine coast. The pole-hooking method minimizes injuries, avoids fast depressurization of fish and allows registration of the precise location of capture and release. In addition, the equipment needed is very simple and economical. The mean number of fish tagged per minute using this methodology on shallow rocky reefs (up to 25-m depth) was similar to that obtained during hook-and-line fishing sessions (ca. one tagged fish every 3 min), given similar densities of A. brasilianus in the fished reefs.