Groundwater Quality Degradation in the Buyuk Menderes River Coastal Wetland

A baseline hydrogeochemical investigation was carried out as a contribution to the inventory of wetlands in Büyük Menderes River (BMR) coastal wetland which is the most important wetland in Turkey that is protected as “Natural Park” by government. In addition to the wetland values, agricultural activities are also important at this delta. From inland to coastal zone, the groundwater type is changed from Ca–HCO₃ to Na–Cl. Perfect correlation of Cl with Na and SO₄ indicated the mixing process between saline and fresh water. The seawater intrusion and “winter-leaching” is the main causes of salinization. Minor ions as B, Br, and Li versus Cl relationship also showed the marine influence at the BMR coastal wetland. The δ¹⁸O and δD composition of the waters are range between −8.11‰ and −1.65‰ and −49.2‰ and 8.1‰, respectively. Isotope values show the seawater mixing line and also dissolution of salts in the BMR coastal wetland. Weathering of aluminosilicates in the Paleozoic schist and clays resulted in the release of silica to the water. Due to the organic activity, iron concentrations reached to the tolerance limits. On the other hand, the use of phosphate fertilizers increases the phosphorus content in the water. The high value of As (from 0.6 to 134 μg/l) can be resulted as an evaporation process in the study area.     

The elecrophysiological bulbocavernosus reflex test in female dogs: Its technique and applicability

The intent of the study was to clarify the technique and the application of the electrophysiological bulbocavernosus reflex (EBCR) test in healthy female dogs. For this aim, 15 healthy female dogs were used in the study. The stimulations were made on the clitoris and the responses were recorded from the right side of the external anal sphincter muscle with a concentric needle recording electrode. The EBCR had response latencies between 18.99 and 25.69ms with the mean value of 22.26ms. The EBCR reflex test is not yet widely used for the evaluation of the functional integrity of sacral spinal cord segments and nerve roots in veterinary clinics. Our experiences indicated that the EBCR reflex test gives valuable data about sacral spinal reflex arc functionality and can be accepted as a routine diagnostic method in small animal clinics for evaluation of the sacral reflex arc.     

Electrical stimulation of lumbar spinal nerve roots in dogs

The aim of this study was to test the applicability of electrical stimulation of lumbar spinal nerve roots and obtain normative electrical root stimulation (ERS) data for L7 nerve root and sciatic nerve in dogs. For that purpose ERS and sciatic nerve stimulations were performed consecutively, in totally 40 healthy dogs. ERS was applied in the L7/S1 intervertebral space via monopolar needle electrodes. Muscle responses were recorded from the gastrocnemius muscles on the left and right hind limbs. Sciatic nerve stimulation was performed at the greater trochanter level on the left hind limb, with records obtained from the left gastrocnemius muscle. Mean root latencies of the left and right side were 5.22?±?0.49 ms and 5.29?±?0.53 ms, respectively. There was no significant difference in root latency between the right and left sides. The mean terminal latency was 3.82?±?0.46 ms. The proximal motor nerve conduction velocity of the sciatic nerve was 63.15?±?3.43 m/s. The results of this study show that ERS provides objective data about the integrity of lumbar spinal nerve roots by evaluating the entire population of motor fibres and total length of the motor axon in dogs. ERS can be considered a useful diagnostic method for confirmation of diagnoses of lumbosacral diseases.     

The effect of various nitrogen fertilizers on zinc (zn) availability in non calcic brown forest soils

In this article the effect of different nitrogen fertilizer application on the availability of zinc (Zn) content in non calcic brown forest soil was investigated. For this purpose increasing rates of NH₄Cl, (NH₄)₂S0₄; NH₄N0₃ and Ca(N0₃)₂.4H₂0 fertilizers were applied for having different physical and chemical properties in two soil samples. An incubation experiment was carried out over 4 months. The available Zn content of the soils was determined each month. According to the results the highest available Zn content of the soils was obtained from NH₄Cl applied to the soils followed by (NH₄)₂S0₄; NH₄N0₃ and Ca(N0₃)₂.4H₂0 application to soil. At the end of the experiment the average available Zn content of non calcic brown forest soils for NH₄Cl, (NH₄)₂S0₄; NH₄N0₃ and Ca(N0₃)₂.4H₂0 fertilizers are 0.93, 0.91, 0.88 and 0.77 mg kg^?1, respectively.     

Investigation of the genetic diversity among native Turkish sheep breeds using mtDNA polymorphisms

A total of 135 unrelated sheep from nine Turkish native sheep breeds (Dagl?c, Kivircik, Imroz, Chios, Morkaraman, Ivesi, Hemsin, Karayaka and Akkaraman) were investigated to determinate the maternal genetic diversity using a sequence of a 531-bp segment of the mtDNA control region. Analysis of the mtDNA control region sequence revealed 63 haplotypes and 53 polymorphic sites. Haplotype diversity, nucleotide diversity and the average number of nucleotide differences were estimated to be 0.9496?±?0.011, 0.01407?±?0.00060 and 7.456, respectively. The sequence analysis also revealed high level of genetic diversity among the native Turkish breeds. These breeds were grouped into three major maternal haplogroups: A, B and C, with one animal belonging from the Akkaraman breed to the rare haplogroup E. Irregular shape of mismatch distribution of haplogroup C could be an indicator that haplogroup C may represent different haplogroups. Contrarily to previous studies carried out on Turkish native breeds, majority of animals grouped in haplogroup A in the present study. This result and the irregular shape of mismatch curve of haplogroup C indicate that genetic structure of Turkish native sheep breeds could be more complicated than it is thought.     

Wettability and roughness characteristics of modified wood boards using a hot-press

The aim of this study was to investigate the effect of the thermal modification process by hot-press on the wettability and surface roughness characteristics of the eucalyptus wood boards. The roughness measurements, average roughness (R_a), and maximum roughness (R_max) were taken both parallel and perpendicular to the grain using a fine stylus tracing technique. Contact angle measurements were obtained using a goniometer system connected to a digital camera and computer system. The results showed that surface roughness values of the modified wood boards using a hot-press significantly decreased with increasing press pressure and with decreasing temperature. The contact angle measurements indicated that the thermal modification had a significant influence on the surface wettability of the wood boards. Statistical analyses showed significant differences in the surface roughness and contact angle values of the wood boards following thermal modification. The results acquired in this work provide important information for future research and utilization of the thermally modified wood boards.     

Variability in the Echinococcus granulosus cytochrome C oxidase 1 mitochondrial gene sequence from livestock in Turkey and a re-appraisal of the G1-3 genotype cluster

Investigations into the genetic strains of Echinococcus granulosus parasites occurring in sheep and cattle in Turkey were undertaken. A total of 112 hydatid cysts were investigated from sheep (100 isolates) derived from widely distributed sites within Turkey as well as from cattle (12 isolates) from the Turkish province of Kars. The parasite genotypes in these isolates were determined by DNA sequencing of part of the mitochondrial Cytochrome C oxidase 1 (cox1) gene. Haplotypes were identified which corresponded clearly to the previously described strain G1 in a total of 107 isolates, including 98 isolates from sheep and 9 isolates from cattle. Five isolates, including 2 sheep and 3 cattle, were determined to belong to the G3 genotype. Parasites of the G3 genotype were identified only in isolates derived from animals in the eastern regions of Turkey. While the majority of the isolates described here had haplotypes corresponding to the G1 genotype, none matched exactly the G1 sequence that was defined in previous studies. Analysis of all GenBank entries for E. granulosus cox1 sequences representing G1, G2 and G3 genotypes identified substantial microsequence variability. G1 and G3 could be distinguished as separate strains, however, the existence of G2 as a separate strain could not be supported. Rather, this can be regarded as a microsequence variation of G3.     

Effects of diflubenzuron on the integument of fifth instar<Emphasis Type="Italic">Galleria mellonella</Emphasis> larvae

Effects of the chitin synthesis inhibitor diflubenzuron (DFB) on the integument of 5th instarGalleria mellonella L. larvae were investigated. When larvae were fed with semi-artificial diets containing 250, 500 and 1000 ppm of the compound, DFB affected the integument. The affected larvae failed to ecdysis, their cuticle was ruptured, lost haemolymph and blackened. In treated larvae, cuticle deposition was disrupted and the cuticle thickness was decreased by ∼50% compared with the untreated control, particularly at day 3 1/2. However, statistically there was no significant difference among the three concentrations (P>0.05). This may indicate that all three concentrations are equally effective in decreasing level. DFB at 500 and 1000 ppm also affected the epidermal cells and caused the occurrence of vacuoles. http://www.phytoparasitica.org posting Dec. 16, 2003.     

Hydraulic Structures in Water Aeration Processes

The primary purpose of water aeration is to increase the oxygen saturation of the water. This can be achieved by using hydraulic structures because of substantial air bubble entrainment at these structures. This paper reviewed the literature on hydraulic structures used in water aeration processes. The hydraulic structures were divided into two groups as the high-head flow systems and the free-surface flow systems. The high-head flow systems were circular and venturi nozzles, pipe with venturi tube, and high-head conduit, and the free-surface flow systems were weir, stepped cascade, and free-surface conduit. Air/water flow ratio and aeration efficiency in circular nozzles with air holes and venturi nozzles were significantly high. Pipes with venturi tubes showed high aeration efficiency although they had low air/water flow ratio. In high-head and free-surface conduits, almost full oxygen transfer, up to the saturation value, occurred. Forty-five degrees triangular sharp-crested weir had significantly better air/water flow ratio and aeration efficiency than other sharp-crested weir shapes. Stepped cascades, in particular nappe flow regime, were very efficient means of aeration.