Respiration pattern and microbial use of field-grown transgenic Bt-maize residues

A 49-day incubation experiment was carried out with the addition of field-grown maize stem and leaf residues to soil at three different temperatures (5, 15, and 25 °C). The aim was to study the effects of two transgenic Bt-maize varieties in comparison to their two parental non-Bt varieties on the mineralization of the residues, on their incorporation into the microbial biomass and on changes in the microbial community structure. The stem and leaf residues of Novelis-Bt contained 3.9 μg g⁻¹ dry weight of the Bt toxin Cry1Ab and those of Valmont-Bt only 0.8 μg g⁻¹. The residues of the two parental non-Bt varieties Nobilis and Prelude contained higher concentrations of ergosterol (+220%) and glucosamine (+190%) and had a larger fungal C-to-bacterial C ratio (+240%) than the two Bt varieties. After adding the Bt residues, an initial peak in respiration of an extra 700 μg CO₂-C g⁻¹ soil or 4% of the added amount was observed in comparison to the two non-Bt varieties at all three temperatures. On average of the four varieties, 19-38% of the maize C added was mineralized during the 49-day incubation at the three different temperatures. The overall mean increase in total maize-derived CO₂ evolution corresponded to a Q₁₀ value of 1.4 for both temperature steps, i.e. from 5 to 15 °C and from 15 to 25 °C. The addition of maize residues led to a strong increase in all microbial properties analyzed. The highest contents were always measured at 5 °C and the lowest at 25 °C. The variety-specific contents of microbial biomass C, biomass N, ATP and adenylates increased in the order Novelis-Bt ? Prelude<Valmont-Bt ? Nobilis. The mineralization of Novelis-Bt residues with the highest Bt concentration and lowest N concentration and their incorporation into the microbial biomass was significantly reduced compared to the parental non-Bt variety Nobilis. These negative effects increased considerably from 5 to 25 °C. The transgenic Bt variety Valmont did not show further significant effects except for the initial peak in respiration at any temperature.     

Ripening reduces the shrinkage of processed dredged material

Purpose

The utilization of dredged material in dike construction as a substitute for traditionally used materials is considered as an option to preserve natural resources such as marsh sediments. As a prerequisite for this application, the equivalency with respect to soil physical and mechanical properties of the materials must be assessed. Previous investigations have shown pronounced differences in shrinkage behavior and desiccation cracking between sediments and dredged material. The key objective of the study was to assess whether shrinkage of processed dredged material can be reduced by further processing, i.e., dewatering, which can be referred to as ripening.

Materials and methods

To compare the shrinkage behavior of the materials, three different methods of different scales were applied. Small-scale methods conducted were the standard procedure for the determination of the shrinkage limit and the determination of the coefficient of linear extensibility (COLE_rod). Large-scale shrink-swell experiments were carried out in a specially constructed test system with 90 l capacity for a period of up to 385 days. Here the materials were ripened, i.e., air-dried, until shrinkage almost ceased, and a rewetting-air-drying cycle was conducted. Shrinkage and swelling were determined during the processes by measuring the changes in volume. On the ripened materials, COLE_rod was determined.

Results and discussion

The experiments show that the shrinkage behavior of processed dredged material can be ameliorated by ripening. COLE_rod of the ripened materials were about 20–80% lower than COLE_rod of the un-ripened materials. The large-scale shrink-swell experiments showed that shrinkage in the second drying cycle amounted to less volume than in the first drying cycle and that shrinkage behavior in contrast to the first drying cycle, where pronounced proportional shrinkage was observed, was dominated by structural and residual shrinkage in this cycle.

Conclusions

Ripening of processed dredged material is considered a useful pre-treatment option to ameliorate the shrink-swell behavior of processed dredged material and to obtain a better functional equivalency with traditionally used dike construction materials such as fine-grained marsh sediments.

     

Oral ketoprofen is effective in the treatment of non-infectious lameness in sows

The efficacy of ketoprofen in the treatment of non-infectious lameness in sows was examined in a double-blinded study. Two dose rates of oral ketoprofen were compared to placebo treatment over five consecutive days. Lameness was assessed with a five-grade scoring system prior to and on the last day of the treatment. The rate of treatment success was 54.3% for the ketoprofen 4mg/kg group (n=46), 53.2% for the ketoprofen 2mg/kg group (n=47) and 20.8% for the pigs in the placebo group (n=48). The difference between both ketoprofen groups and the placebo group was significant (P=0.001), but there was no difference between the two ketoprofen groups (P=0.78). Oral ketoprofen was well tolerated and no adverse events were observed. As lameness is a very common problem in sows, oral ketoprofen appeared to be a practical way to alleviate pain and improve the welfare of sows.     

Two class III chitin synthases specifically localized in appressoria and haustoria of Puccinia graminis f. sp. tritici

Rust fungi like Puccinia graminis f. sp. tritici are known to change their cell wall properties upon entering the plant tissue. Immunohistochemistry revealed the cellular localization of two class III chitin synthase isoforms in rust mycelia developing on and in the host plant. Isoform IIIa is restricted to fungal infection structures growing on the surface of the plant, such as germ tubes and, predominantly, appressoria. Isoform IIIb is found exclusively in haustoria developed inside the plant. Thus, the rust fungus uses at least two chitin synthase isoforms with specialized functions in the differentiation of infection structures during the biotrophic plant-pathogen-interaction.     

Cardiac troponin I and the occurrence of cardiac arrhythmias in horses with experimentally induced endotoxaemia

Branding is the traditional and well-established method used to mark horses, but recently microchip transponders for implantation have become available. In this study, behaviour, physiological stress variables and skin temperature in foals were determined in response to hot-iron branding (n=7) and microchip implantation (n=7). Salivary cortisol concentrations increased in response to branding (1.8 ± 0.2 ng/mL) and microchip implantation (1.4 ± 0.1ng/mL), but cortisol release over time did not differ. In response to both manipulations there was a transient increase in heart rate (P<0.001) and heart rate variability (P<0.01). Branding and microchip implantation induced a comparable aversive behaviour (branding, score 3.86 ± 0.85; microchip, score 4.00 ± 0.82). Both techniques thus caused similar physiological and behavioural changes indicative of stress. Acutely, implantation of a microchip was as stressful as branding in foals. Branding caused a necrotising skin burn lasting at least 7 days. Moreover branding, but not microchip implantation (P<0.001), was accompanied by a generalized increase in skin temperature which was comparable to low degree post-burn hypermetabolism in humans.     

Minimally invasive synovium harvest for potential use in meniscal tissue engineering

Tissue engineering is being investigated as a means for treating avascular meniscal injury or total meniscal loss in human and veterinary patients. The purpose of this study was to determine if an arthroscopic tissue shaver can be used to collect viable synoviocytes for in vitro culture during therapeutic stifle arthroscopy, with the long term goal of producing autologous meniscal fibrocartilage for meniscal tissue engineering. Synovium was harvested arthroscopically from 13 dogs with naturally occurring cranial cruciate ligament deficiency and obtained from 5 dogs with patellar luxation via arthrotomy. Cells harvested via arthroscopy and arthrotomy were treated with a chondrogenic growth factor protocol and analyzed for meniscal-like matrix constituents including collagens type I, II, and glycosaminoglycans. Arthrotomy and Arthroscopic origin cells formed contracted tissues containing collagen I, II and small amounts of GAG. These surgical methods provide clinically relevant access to synoviocytes for potential use in meniscal tissue engineering.     

Pluripotent stem cells--model of embryonic development,tool for gene targeting,and basis of cell therapy

Embryonic stem (ES) cells are pluripotent cell lines with the capacity of self-renewal and a broad differentiation plasticity. They are derived from pre-implantation embryos and can be propagated as a homogeneous, uncommitted cell population for an almost unlimited period of time without losing their pluripotency and their stable karyotype. Murine ES cells are able to reintegrate fully into embryogenesis when returned into an early embryo, even after extensive genetic manipulation. In the resulting chimeric offspring produced by blastocyst injection or morula aggregation, ES cell descendants are represented among all cell types, including functional gametes. Therefore, mouse ES cells represent an important tool for genetic engineering, in particular via homologous recombination, to introduce gene knock-outs and other precise genomic modifications into the mouse germ line. Because of these properties ES cell technology is of high interest for other model organisms and for livestock species like cattle and pigs. However, in spite of tremendous research activities, no proven ES cells colonizing the germ line have yet been established for vertebrate species other than the mouse (Evans and Kaufman, 1981; Martin, 1981) and chicken (Pain et al., 1996). The in vitro differentiation capacity of ES cells provides unique opportunities for experimental analysis of gene regulation and function during cell commitment and differentiation in early embryogenesis. Recently, pluripotent stem cells were established from human embryos (Thomson et al., 1998) and early fetuses (Shamblott et al., 1998), opening new scenarios both for research in human developmental biology and for medical applications, i.e. cell replacement strategies. At about the same time, research activities focused on characteristics and differentiation potential of somatic stem cells, unravelling an unexpected plasticity of these cell types. Somatic stem cells are found in differentiated tissues and can renew themselves in addition to generating the specialized cell types of the tissue from which they originate. Additional to discoveries of somatic stem cells in tissues that were previously not thought to contain these kinds of cells, they also appear to be capable of developing into cell types of other tissues, but have a reduced differentiation potential as compared to embryo-derived stem cells. Therefore, somatic stem cells are referred to as multipotent rather than pluripotent. This review summarizes characteristics of pluripotent stem cells in the mouse and in selected livestock species, explains their use for genetic engineering and basic research on embryonic development, and evaluates their potential for cell therapy as compared to somatic stem cells.     

Agronomic performance of winter wheat grown under highly divergent soil moisture conditions in rainfed and water‐managed environments

Even in the temperate climates of Europe, increasing early season drought and rising air temperature are presenting new challenges to farmers and wheat breeders. Sixteen winter wheat (Triticum aestivum L.) genotypes consisting of three hybrids, six line cultivars and two breeding lines from Germany as well as five line cultivars from France, Austria, Slovakia, Hungary and the Ukraine (referred to as “exotic” lines) have been included in this study. The genetic materials were evaluated over three growing seasons under a range of soil moisture regimes at the three North German sites Braunschweig (irrigated and drought‐stressed), Warmse (rainfed) and Söllingen (rainfed). The average grain yields in the twelve growth environments (water regime × season combinations) ranged from 6.1 to 13.5 t ha^?1. The exotic lines showed little evidence of specific phenological adaptation to drought although they are frequently faced with water scarcity in their countries of origin. The hybrids and German lines exhibited higher regression coefficients (b_i) to environmental means than the exotic lines, indicating particular adaptation to favourable growing conditions. The phenotypical correlations of grain yield between the various environments were high, ranging for instance from 0.6 to 0.8 for the irrigated and drought‐stressed environments at Braunschweig. It is thus expected that in the foreseeable future continued selection aiming at high yield potential will suffice as a means to counter the expected increase in droughts.     

Biomass equations for seven different tree species growing in coppice-with-standards forests in Central Germany

With an increasing demand of sustainable raw materials for bioenergy use, coppicing as management approach to increase the biomass production of forests is becoming of greater importance. This study describes the parameterization of biomass equations for six tree species traditionally used in coppices forests, namely sycamore maple (Acer pseudoplatanus L.), field maple (Acer campestre L.), European ash (Fraxinus excelsior L.), European hornbeam (Carpinus betulus L.), downy birch (Betula pubescens Ehrh.), and common hazel (Corylus avellana L.) growing in coppice-with-standard systems in Lower Saxony, Germany. The parameterization was based on measurements of over 950 trees sampled from two forest sites. The sampled trees were felled and separated into three biomass compartments (stem, coarse branches, and fine brushwood) and weighed on site. The dry weight of sub samples from each compartment was measured. Equations were derived for total aboveground biomass, stem biomass, and crown biomass using regression analyses. We either used diameter at breast height as single independent explanatory variable or in combination with tree height. Biomass production of stump sprouts and generatively grown stems was compared for ash and sycamore maple. In the same age classes, it was found that ash stump sprouts had a slightly higher production than seed-grown stems. For sycamore maple, no difference was detected.