Metallic glasses

Amorphous metallic alloys, relative newcomers to the world of glasses, have properties that are unusual for solid metals. The metallic glasses, which exist in a very wide variety of compositions, combine fundamental interest with practical applications. They also serve as precursors for exciting new nanocrystalline materials. Their magnetic (soft and hard) and mechanical properties are of particular interest.     

Comparison of three methods of temperature measurement in hypothermic, euthermic, and hyperthermic dogs

OBJECTIVE: To assess the reliability and accuracy of a predictive rectal thermometer, an infrared auricular thermometer designed for veterinary use, and a subcutaneous temperature-sensing microchip for measurement of core body temperature over various temperature conditions in dogs. DESIGN: Prospective study. ANIMALS: 8 purpose-bred dogs. PROCEDURES: A minimum of 7 days prior to study commencement, a subcutaneous temperature-sensing microchip was implanted in 1 of 3 locations (interscapular, lateral aspect of shoulder, or sacral region) in each dog. For comparison with temperatures measured via rectal thermometer, infrared auricular thermometer, and microchip, core body temperature was measured via a thermistor-tipped pulmonary artery (TTPA) catheter. Hypothermia was induced during anesthesia at the time of TTPA catheter placement; on 3 occasions after placement of the catheter, hyperthermia was induced via administration of a low dose of endotoxin. Near-simultaneous duplicate temperature measurements were recorded from the TTPA catheter, the rectal thermometer, auricular thermometer, and subcutaneous microchips during hypothermia, euthermia, and hyperthermia. Reliability (variability) of temperature measurement for each device and agreement between each device measurement and core body temperature were assessed. RESULTS: Variability between duplicate near-simultaneous temperature measurements was greatest for the auricular thermometer and least for the TTPA catheter. Measurements obtained by use of the rectal thermometer were in closest agreement with core body temperature; for all other devices, temperature readings typically underestimated core body temperature. CONCLUSIONS AND CLINICAL RELEVANCE: Among the 3 methods of temperature measurement, rectal thermometry provided the most accurate estimation of core body temperature in dogs.     

Temperature control of the development of frost hardiness in two populations of Leptospermum scoparium

Seedlings of Leptospermum scoparium J.R. et G. Forst (manuka) originating from seed from a low altitude coastal site (Auckland) and from a high altitude inland site (Desert Road) were grown for 96 days in four controlled environments to compare the relationship between growth temperature and frost hardening. Day/night temperature treatments were 12/6, 12/3, 12/0 and 12/-3 degrees C. Frost hardiness was determined at 14-day intervals by exposing whole seedlings to temperatures ranging from -2 to -8 degrees C. Frost damage differed significantly between the two populations: Desert Road seedlings were less affected than Auckland seedlings. At all growth temperatures, the time courses of frost hardiness of both populations followed curvilinear relationships reaching a maximum hardiness at about Day 50, after which the seedlings spontaneously dehardened. The rate of frost hardening increased linearly with decreasing temperature from 6 to 0 degrees C, but thereafter, no further increase occurred with decreasing temperature to -3 degrees C. The frost hardening process was more sensitive to temperature in the Desert Road seedlings than in the Auckland seedlings, and this difference may account for the intraspecific variation in frost hardening capacity of this species. Comparisons with Pinus radiata D. Don and Lolium perenne L. indicated that interspecific variation in frost hardening capacity can also be accounted for by differences in the sensitivity of the hardening process to temperature.     

Stomatal response of an anisohydric grapevine cultivar to evaporative demand, available soil moisture and abscisic acid

Stomatal responsiveness to evaporative demand (air vapour pressure deficit (VPD)) ranges widely between species and cultivars, and mechanisms for stomatal control in response to VPD remain obscure. The interaction of irrigation and soil moisture with VPD on stomatal conductance is particularly difficult to predict, but nevertheless is critical to instantaneous transpiration and vulnerability to desiccation. Stomatal sensitivity to VPD and soil moisture was investigated in Semillon, an anisohydric Vitis vinifera L. variety whose leaf water potential (Ψ(l)) is frequently lower than that of other grapevine varieties grown under similar conditions in the warm grape-growing regions of Australia. A survey of Semillon vines across seven vineyards revealed that, regardless of irrigation treatment, midday Ψ(l) was dependent on not only soil moisture but VPD at the time of measurement. Predawn Ψ(l) was more closely correlated to not only soil moisture in dry vineyards but to night-time VPD in drip-irrigated vineyards, with incomplete rehydration during high night-time VPD. Daytime stomatal conductance was low only under severe plant water deficits, induced by extremes in dry soil. Stomatal response to VPD was inconsistent across irrigation regime; however, in an unirrigated vineyard, stomatal sensitivity to VPD-the magnitude of stomatal response to VPD-was heightened under dry soils. It was also found that stomatal sensitivity was proportional to the magnitude of stomatal conductance at a reference VPD of 1kPa. Exogenous abscisic acid (ABA) applied to roots of Semillon vines growing in a hydroponic system induced stomatal closure and, in field vines, petiole xylem sap ABA concentrations rose throughout the morning and were higher in vines with low Ψ(l). These data indicate that despite high stomatal conductance of this anisohydric variety when grown in medium to high soil moisture, increased concentrations of ABA as a result of very limited soil moisture may augment stomatal responsiveness to low VPD.     

Carbon distribution and losses: erosion and deposition effects

Because of concerns about the eventual impact of atmospheric CO₂ accumulations, there is growing interest in reducing net CO₂ emissions from soil and increasing C storage in soil. This review presents a framework to assess soil erosion and deposition processes on the distribution and loss of C in soils. The physical processes of erosion and deposition affect soil C distribution in two main ways and should be considered when evaluating the impact of agriculture on C storage. First, these processes redistribute considerable amounts of soil C, within a toposequence or a field, or to a distant site. Accurate estimates of soil redistribution in the landscape or field are needed to quantify the relative magnitude of soil lost by erosion and accumulated by deposition. Secondly, erosion and deposition drastically alter the biological process of C mineralization in soil landscapes. Whereas erosion and deposition only redistribute soil and organic C, mineralization results in a net loss of C from the soil system to the atmosphere. Little is known about the magnitude of organic C losses by mineralization and those due to erosion, but the limited data available suggest that mineralization predominates in the first years after the initial cultivation of the soil, and that erosion becomes a major factor in later years. Soils in depositional sites usually contain a larger proportion of the total organic C in labile fractions of soil C because this material can be easily transported. If the accumulation of soil in depositional areas is extensive, the net result of the burial (and subsequent reduction in decomposition) of this active soil organic matter would be increased C storage. Soil erosion is the most widespread form of soil degradation. At regional or global levels its greatest impact on C storage may be in affecting soil productivity. Erosion usually results in decreased primary productivity, which in turn adversely affects C storage in soil because of the reduced quantity of organic C returned to the soil as plant residues. Thus the use of management practices that prevent or reduce soil erosion may be the best strategy to maintain, or possibly increase, the worlds soil C storage.     

Phylogenetic analysis of bacterial communities in the shrimp and sea cucumber aquaculture environment in northern China by culturing and PCR–DGGE

In this study, we investigated the bacterial communities in the shrimp and sea cucumber culture environment, including shrimp ponds (SP), sea cucumber ponds (SCP), mixed-culture ponds (MCP) and the effluent channel (EC) in Qingdao, China. Bacteria cultivation showed that the counts of heterotrophic, nitrate-reducing and sulfate-reducing bacteria in the sediment of SP were higher than that in the sediment of SCP and MCP, varying between 8.7 × 10⁴ and 1.86 × 10⁶, 2.1 × 10⁴ and 1.1 × 10⁵, and 9.3 × 10¹ and 1.1 × 10⁴ CFU g^?1, respectively. In contrast, the counts of ammonium-oxidizing and nitrifying bacteria in the sediment of SP was lower than that in the sediment of SCP and MCP. Denaturing gradient gel electrophoresis (DGGE) of 16S rDNA gene and dendrogram analyses showed that bacterial diversity in the mixed-culture environment was higher than that in the monocultures. The similarity of bacterial community between EC and SCP or MCP was higher than that between EC and SP. These results indicated that sea cucumber culture played a significant role in influencing the environmental bacterial communities that were composed mainly of Flavobacteriaceae (64.3%), Bacteriodetes (21%) and delta proteobacteria (14.7%), including the genera of Croceimarina, Lutibacter, Psychroserpens and so on. The results explained the benefit of sea cucumber culture in shrimp ponds at the level of microbial ecology.