Determination of Energy Input-Output Analysis in Plum (<Emphasis Type="Italic">Prunus domestica</Emphasis> L.) Production

The aim of this research is to compose the energy input-output analysis of plum in Nevsehir province in Turkey. This research was conducted at the plum cultivating facilities during the 2015–2016 production seasons in Nevsehir province of Central Anatolian Region in Turkey. The agricultural input energies and output energies used in plum cultivation were calculated to determine the energy input-output analysis. According to the research findings, the energy inputs in plum cultivation were calculated respectively 3920?MJ ha^?1 (44.99%) chemical fertilizers energy, 1618.91?MJ ha^?1 (18.58%) diesel fuel energy, 1125.85?MJ ha^?1 (12.92%) chemicals energy, 1069.20?MJ ha^?1 (12.27%) machinery energy, 723.24?MJ ha^?1 (8.30%) human labour energy and 255?MJ ha^?1 (2.93%) irrigation water energy. Production output plum yield were calculated as 12,112.50?MJ ha^?1. The energy output/input ratio, specific energy, energy usage efficiency and net energy calculations were calculated respectively as 1.39, 1.37?MJ kg^?1, 0.73?kg MJ^?1 and 3400.30?MJ ha^?1.     

Removal of Phosphate from Waste Waters by Adsorption

In this study, the adsorption of phosphate on gas concrete from aqueous solutions has been studied as functions of temperature, mixing rates and suspension pH. Over 99% of phosphate removal was found. The chemical composition of the gas concrete has been defined by X-ray analysis. Experimental data was fitted to the Langmuir equation in order to Langmuir coefficients. After calculating Langmuir coefficients, adsorption free energy (Δ G ⁰ _ads.) has been determined. In order to gather information about adsorption mechanism, electrophoretic mobilites of particles were measured at various pHs by using Zeta meter 3.0+. It has been found that the adsorption is driven by the interactions between the ionizations of CaO and Al₂O₃ and the formation of AlPO₄. According to the BET (N₂) measurements, the specific surface area of gas concrete was found as 22 m²g^-1. The surface area after adsorption has been found as 17 m²g^-1. The surface area covered by adsorbate has been found as 5.23 m²g^-1 by usinga_s = n^s _m. a_m. N_A. These two areas determined by BET and Langmuir model were close to each other (BET: 22 m²g^-1–17 m²g^-1).     

Effect of nitrogen fertilization on yield and nitrogen and water use efficiencies of winter wheat (durum and bread) varieties grown under conditions found in Central Anatolia

In order to evaluate the influence of different N rates on percent N derived from fertilizer (%Ndff) at different growth stages, on yields and the percent N use efficiency (%NUE) values of two winter wheat varieties (durum and bread), field experiments on fallow were carried out at four different locations in Central Anatolia, in the 1991–1992 and 1992–1993 growing seasons. At each site the rates of N (0, 40, 80 and 120?kg N/ha) were applied as ammonium sulphate [(NH₄)₂SO₄] using a Latin Square experimental design with four replicates. The total amounts of N fertilizer were applied once after seedling emergence at all experimental sites. Labelled (¹⁵NH₄)₂SO₄ fertilizer was applied to sub-plots from which %Ndff values were determined at tillering, booting, grain filling, and harvest stages. Yield sub-plots received unlabelled (NH₄)₂SO₄ from which total dry matter (seed and straw) and N yields were determined. Also the %NUE values were calculated by the ¹⁵N and "difference" methods at the harvest stage. Stored soil moisture at 0–90?cm depth, evapotranspiration and water use efficiency values were calculated as well. The results obtained showed that (1) Gerek-79 variety used both the applied N fertilizer and the available soil moisture more efficiently, (2) the percent NUE values obtained overall were generally less than 20 for both varieties and (3) with the ¹⁵N method, less variable %NUE values were obtained in comparison to the difference method.     

Antibacterial properties of silk fibroin/chitosan blend films loaded with plant extract

The silk fibroin (SF)/chitosan (CHI) blend films were prepared by dissolving them in formic acid. The morphology of the films was examined by scanning electron microscopy (SEM). The roughness of the membranes was determined by atomic force microscopy (AFM). These films were treated with the extracts of Pistacia terebinthus, Pistacia lentiscus, and Hypericum empetrifolium. Folin-Ciocalteu assay was used to determine the amount of total phenols adsorbed on these blend films. The antibacterial properties of films were tested using disc diffusion and turbidity measurement methods against Escherichia coli and Staphylococcus epidermidis. The release of adsorbed phenolics from the film surface resulted in antibacterial properties.     

Analysis and tensile characterization of air-entangled textured polyester woven fabrics depending on interlacement and yarn sets

The aim of this study was to understand the failure mechanism of two dimensional dry fabric structure considering yarn sets and interlacements. For this purpose, data generated on air-entangled textured polyester woven fabric under the simple tensile load and analyzed by developed regression model. The regression model showed that warp and weft directional tensile strengths of satin fabric were higher than those of plain and rib fabrics in unravel sample. This might be related to the number of interlacements of the fabrics. There was not a considerable difference between warp directional tensile strength of ravel and unravel satin fabrics, whereas weft directional tensile strength of ravel satin fabric decreased rapidly with respect to its unravel form. The satin fabric showed the highest warp directional tensile strength among the others. The lowest weft directional tensile strength was received from ribs fabric. In semi-ravel sample, all fabrics showed low warp and weft directional tensile strength values except in plain fabric. Warp directional tensile elongation of plain fabric was the highest in unravel sample. Satin fabric showed the highest warp directional tensile elongation in the ravel sample. Warp directional tensile elongations of all the fabrics in the semi-ravel sample became low. Weft directional tensile elongation of satin fabric was the highest in unravel sample. In addition, satin and plain fabrics showed the highest weft directional tensile elongations in the ravel sample. Weft directional tensile elongations of all the fabrics in the semi-ravel sample became low except in ribs fabric.     

Prevalence and economic significance of bovine hypodermosis in Afyonkarahisar province of Turkey

This study was carried out to investigate the prevalence and economic losses due to in cattle of hypodermosis between May 2008 and April 2009 in Afyonkarahisar province of Turkey. A total of 6,598 cattle—3,498 in pasture and 3,100 in slaughterhouse—were examined for hypodermosis. One hundred ninety-five out of 6,598 cattle (2.96%) were found positive. Concerning this infestation rate, the prevalence of hypodermosis in field was 5.3%, whereas the prevalence was 0.3% in slaughter house. Hypoderma bovis and Hypoderma lineatum were recorded in slaughter house. First-stage Hypoderma spp. larvae weren’t found in cattle organs in slaughterhouse. The annual economic loss on skins is estimated to be about 18,288 TL (currency exchange rate is 1 USD:1.499 TL).     

Effects of land-use and management practices on soil ergosterol content in andosols

Ergosterol is a fungus-specific chemical component which has been extensively used to assess the fungal biomass and activity in soils. In the present study, we investigated the soil ergosterol content in a group of Japanese soils differing in management. In addition, the relationships among the soil ergosterol content (SEC), microbial biomass C (MBC), and microbial biomass N (MBN) were also tested in different seasons. Our results showed that the SEC was lower in intensively cropped soils than in pasture and forest soils. In general, no consistent trend was observed for SEC of pasture soils within the same sampling period. However, SEC tended to decrease in most of the soils in autumn, which may be ascribed to the effect of seasonal changes on fungal biomass. No strong evidence could be obtained for the effect of different fertilizers on SEC, which can be due to different management variables and interspecific variations between fungal communities at different soil sites. Our results did not suggest the presence of a noticeable correlation between SEC and MBC or MBN. The ratio of SEC in total biomass C was lower (0.20 and 0.11% in spring and autumn, respectively) compared with the values reported.     

Optimization of Process Parameters for Removal of Arsenic Using Activated Carbon-Based Iron-Containing Adsorbents by Response Surface Methodology

Rhizoremediation is a complex type of green clean-up technology that involves both plants and the rhizosphere-associated microorganisms to decompose hazardous compounds. The success of the strategy strongly depends on plant tolerance towards the pollutant, as well as plant's interactions with the rhizospheric microbes. The microorganisms may be stimulated by the secreted root exudates, which results in an increased breakdown of contaminants in the rhizosphere. The main goal of this study was to establish a potential rhizoremediation combination for a diesel-polluted site. Inoculation of plant roots or seeds with indigenous rhizospheric populations is a common approach in the rhizoremediation. However, we introduced hydrocarbon-degrading consortia (M10, R3, and K52) that were previously isolated from crude oil-contaminated soil instead of indigenous microbes. Bioaugmentation with these petroleum degraders was applied to screen four high biomass crop species (Indian mustard, alfalfa, high erucic acid rapeseed, HEAR, and low erucic acid rapeseed, LEAR) for their tolerance towards diesel oil. At no pollution, a promoting effect of M10 bacteria could be observed on germination and root elongation of all plant species. Moreover, M10 consortiums increased the germination index at 6,000 mg diesel oil per kilogram dry soil in the case of Indian mustard, alfalfa, and HEAR. The latter species was found to increment its dry weight upon bioaugmentation with M10 bacteria and all diesel oil treatments (6,000 and 24,000 mg diesel oil per kilogram dry soil). The initial results indicate HEAR and the M10 bacterial consortium as a promising plant–microbe tandem for a long-term rhizoremediation process.

     

Electromagnetic shielding characteristics of woven fabrics made of hybrid yarns containing metal wire

In this study, electromagnetic shielding characteristics of woven fabrics made of hybrid yarns are investigated. For this purpose, initially the hybrid yarns containing stainless steel wire are produced with hollow spindle covering technique, and then eight different fabric samples are produced using these hybrid yarns. Electromagnetic shielding values of fabric samples are determined by a test set up based on enclosure measurement technique. Measurements are made in the frequency range of 30 MHz-9.93 GHz. Test results show that woven fabric samples investigated in this study have 25–65 dB electromagnetic shielding effectiveness for incident frequency. It was also shown that the direction, density and settlement type of conductive hybrid yarn in fabric structure are important parameters affecting electromagnetic shielding characteristics of woven fabrics.